ESP-AT User GuideLogo
release/v2.2.0.0_esp32
  • Get Started
  • AT Binary Lists
  • AT Command Set
  • AT Command Examples
  • Compile and Develop
    • How to clone project and compile it
    • How to set AT port pin
    • How to add user-defined AT commands
    • How to create factory parameter bin
    • How to customize BLE services
    • How to customize partitions
    • How to enable ESP32 AT Classic Bluetooth
    • How to enable ESP32 AT Ethernet
    • How to add new platform
    • How to implement ESP32 SDIO_AT
    • How to implement SPI AT
    • How to implement OTA update
    • How to update IDF
    • How to understand ESP-AT the differences of each type of module
    • AT API Reference
  • Customized AT Commands and Firmware
  • Index of Abbreviations
ESP-AT User Guide
  • »
  • How to compile and develop your own AT project
  • Edit on GitHub

How to compile and develop your own AT project¶

[中文]

  • How to clone project and compile it
  • How to set AT port pin
  • How to add user-defined AT commands
  • How to create factory parameter bin
  • How to customize BLE services
  • How to customize partitions
  • How to enable ESP32 AT Classic Bluetooth
  • How to enable ESP32 AT Ethernet
  • How to add new platform
  • How to implement ESP32 SDIO_AT
  • How to implement SPI AT
  • How to implement OTA update
  • How to update IDF
  • How to understand ESP-AT the differences of each type of module
  • AT API Reference

Provide feedback about this document

Previous Next

© Copyright 2020, Espressif Systems (Shanghai) Co., Ltd.. Revision 62ff2d66.

Built with Sphinx using a theme provided by Read the Docs.