Released Firmware

[中文]

It is recommended to use the lastest version of firmware. Currently, Espressif releases AT firmware for the following ESP32-C3 series of modules.

Note

• The current ESP32-C3 AT firmware supports ECO0 (Rev v0.0) to ECO4 (Rev v0.4) chip versions (including ECO0 and ECO4), but does not support ESP32-C3 ECO6 (Rev v1.0), ECO7 (Rev v1.1), and subsequent versions.

• If there is no released firmware for your module, you can either use the firmware for the module that has the same hardware configuration as yours (see ESP-AT Firmware Differences for which module has the same configuration), or if you need to modify the following configurations, you can generate a new firmware for your module by modifying the released firmware using the at.py Tool.

  • Modify UART Configuration

  • Modify Wi-Fi Configuration

  • Modify Certificate and Key Configuration

  • Modify GATTS Configuration

ESP32-C3-MINI-1 Series

• v3.3.0.0 ESP32-C3-MINI-1-AT-V3.3.0.0.zip (Recommended)

• v3.2.0.0 ESP32-C3-MINI-1-AT-V3.2.0.0.zip

• v2.4.2.0 ESP32-C3-MINI-1-AT-V2.4.2.0.zip

• v2.4.1.0 ESP32-C3-MINI-1-AT-V2.4.1.0.zip

• v2.4.0.0 ESP32-C3-MINI-1-AT-V2.4.0.0.zip

• v2.3.0.0 ESP32-C3-MINI-1-AT-V2.3.0.0.zip

• v2.2.0.0 ESP32-C3-MINI-1-AT-V2.2.0.0.zip

Subscribe to AT Releases

Please refer to the Subscribe to AT Releases documentation to subscribe to our version release notifications and stay updated on the latest releases.

Provide feedback about this document