[ANALOG-160] Chip Will Be Damaged When BIAS_SLEEP = 0 and PD_CUR = 1
Description
If the analog power is configured as BIAS_SLEEP = 0 and PD_CUR = 1, the chip will be permanently damaged. This issue might be triggered when ULP and/or touch sensor is used during Light-sleep or Deep-sleep.
Workarounds
Users are suggested to disable such analog power configuration in sleep mode through software.
This issue has been bypassed by disabling the above configuration in ESP-IDF v4.4.2+, v5.0 and above.
Solution
No fix scheduled.