HFP Defines

API Reference

Header File

components/bt/host/bluedroid/api/include/api/esp_hf_defs.h
This header file can be included with:
#include "esp_hf_defs.h"
This header file is a part of the API provided by the bt component. To declare that your component depends on bt, add the following to your CMakeLists.txt:
REQUIRES bt
or
PRIV_REQUIRES bt

Enumerations

enum esp_hf_in_band_ring_state_t

in-band ring tone state

Values:

enumerator ESP_HF_IN_BAND_RINGTONE_NOT_PROVIDED

enumerator ESP_HF_IN_BAND_RINGTONE_PROVIDED

enum esp_hf_vr_state_t

voice recognition state

Values:

enumerator ESP_HF_VR_STATE_DISABLED: voice recognition disabled

enumerator ESP_HF_VR_STATE_ENABLED: voice recognition enabled

enum esp_hf_volume_control_target_t

Bluetooth HFP audio volume control target.

Values:

enumerator ESP_HF_VOLUME_CONTROL_TARGET_SPK: speaker

enumerator ESP_HF_VOLUME_CONTROL_TARGET_MIC: microphone

enum esp_hf_audio_state_t

Bluetooth HFP audio connection status.

Values:

enumerator ESP_HF_AUDIO_STATE_DISCONNECTED: audio connection released

enumerator ESP_HF_AUDIO_STATE_CONNECTING: audio connection has been initiated

enumerator ESP_HF_AUDIO_STATE_CONNECTED: audio connection is established

enumerator ESP_HF_AUDIO_STATE_CONNECTED_MSBC: mSBC audio connection is established

enum esp_hf_volume_type_t

Values:

enumerator ESP_HF_VOLUME_TYPE_SPK

enumerator ESP_HF_VOLUME_TYPE_MIC

enum esp_hf_network_state_t

+CIND network service availability status

Values:

enumerator ESP_HF_NETWORK_STATE_NOT_AVAILABLE

enumerator ESP_HF_NETWORK_STATE_AVAILABLE

enum esp_hf_ciev_report_type_t

+CIEV report type

Values:

enumerator ESP_HF_IND_TYPE_CALL: position of call indicator

enumerator ESP_HF_IND_TYPE_CALLSETUP: position of callsetup indicator

enumerator ESP_HF_IND_TYPE_SERVICE: position of service indicator

enumerator ESP_HF_IND_TYPE_SIGNAL: position of signal strength indicator, range: 0-5

enumerator ESP_HF_IND_TYPE_ROAM: position of roaming indicator

enumerator ESP_HF_IND_TYPE_BATTCHG: position of battery charge indicator, range: 0-5

enumerator ESP_HF_IND_TYPE_CALLHELD: position of callheld indicator

enum esp_hf_service_type_t

+CIEV Service type

Values:

enumerator ESP_HF_SERVICE_TYPE_HOME

enumerator ESP_HF_SERVICE_TYPE_ROAMING

enum esp_hf_call_status_t

+CIND call status indicator values

Values:

enumerator ESP_HF_CALL_STATUS_NO_CALLS: no call in progress

enumerator ESP_HF_CALL_STATUS_CALL_IN_PROGRESS: call is present(active or held)

enum esp_hf_call_setup_status_t

+CIND call setup status indicator values

Values:

enumerator ESP_HF_CALL_SETUP_STATUS_IDLE: no call setup in progress

enumerator ESP_HF_CALL_SETUP_STATUS_INCOMING: incoming call setup in progress

enumerator ESP_HF_CALL_SETUP_STATUS_OUTGOING_DIALING: outgoing call setup in dialing state

enumerator ESP_HF_CALL_SETUP_STATUS_OUTGOING_ALERTING: outgoing call setup in alerting state

enum esp_hf_roaming_status_t

+CIND roaming status indicator values

Values:

enumerator ESP_HF_ROAMING_STATUS_INACTIVE: roaming is not active

enumerator ESP_HF_ROAMING_STATUS_ACTIVE: a roaming is active

enum esp_hf_call_held_status_t

+CIND call held indicator values

Values:

enumerator ESP_HF_CALL_HELD_STATUS_NONE: no calls held

enumerator ESP_HF_CALL_HELD_STATUS_HELD_AND_ACTIVE: both active and held call

enumerator ESP_HF_CALL_HELD_STATUS_HELD: call on hold, no active call

enum esp_hf_current_call_status_t

+CLCC status of the call

Values:

enumerator ESP_HF_CURRENT_CALL_STATUS_ACTIVE: active

enumerator ESP_HF_CURRENT_CALL_STATUS_HELD: held

enumerator ESP_HF_CURRENT_CALL_STATUS_DIALING: dialing (outgoing calls only)

enumerator ESP_HF_CURRENT_CALL_STATUS_ALERTING: alerting (outgoing calls only)

enumerator ESP_HF_CURRENT_CALL_STATUS_INCOMING: incoming (incoming calls only)

enumerator ESP_HF_CURRENT_CALL_STATUS_WAITING: waiting (incoming calls only)

enumerator ESP_HF_CURRENT_CALL_STATUS_HELD_BY_RESP_HOLD: call held by response and hold

enum esp_hf_current_call_direction_t

+CLCC direction of the call

Values:

enumerator ESP_HF_CURRENT_CALL_DIRECTION_OUTGOING: outgoing

enumerator ESP_HF_CURRENT_CALL_DIRECTION_INCOMING: incoming

enum esp_hf_current_call_mpty_type_t

+CLCC multi-party call flag

Values:

enumerator ESP_HF_CURRENT_CALL_MPTY_TYPE_SINGLE: not a member of a multi-party call

enumerator ESP_HF_CURRENT_CALL_MPTY_TYPE_MULTI: member of a multi-party call

enum esp_hf_current_call_mode_t

+CLCC call mode

Values:

enumerator ESP_HF_CURRENT_CALL_MODE_VOICE

enumerator ESP_HF_CURRENT_CALL_MODE_DATA

enumerator ESP_HF_CURRENT_CALL_MODE_FAX

enum esp_hf_call_addr_type_t

+CLCC address type

Values:

enumerator ESP_HF_CALL_ADDR_TYPE_UNKNOWN: unkown address type

enumerator ESP_HF_CALL_ADDR_TYPE_INTERNATIONAL: international address

enum esp_hf_subscriber_service_type_t

+CNUM service type of the phone number

Values:

enumerator ESP_HF_SUBSCRIBER_SERVICE_TYPE_UNKNOWN: unknown

enumerator ESP_HF_SUBSCRIBER_SERVICE_TYPE_VOICE: voice service

enumerator ESP_HF_SUBSCRIBER_SERVICE_TYPE_FAX: fax service

enum esp_hf_btrh_status_t

+BTRH response and hold result code

Values:

enumerator ESP_HF_BTRH_STATUS_HELD: incoming call is put on held in AG

enumerator ESP_HF_BTRH_STATUS_ACCEPTED: held incoming call is accepted in AG

enumerator ESP_HF_BTRH_STATUS_REJECTED: held incoming call is rejected in AG

enum esp_hf_btrh_cmd_t

AT+BTRH response and hold action code.

Values:

enumerator ESP_HF_BTRH_CMD_HOLD: put the incoming call on hold

enumerator ESP_HF_BTRH_CMD_ACCEPT: accept a held incoming call

enumerator ESP_HF_BTRH_CMD_REJECT: reject a held incoming call

enum esp_hf_nrec_t

Values:

enumerator ESP_HF_NREC_STOP

enumerator ESP_HF_NREC_START

enum esp_hf_call_waiting_status_t

+CCWA resposne status

Values:

enumerator ESP_HF_CALL_WAITING_INACTIVE

enumerator ESP_HF_CALL_WAITING_ACTIVE

enum esp_hf_wbs_config_t

Values:

enumerator ESP_HF_WBS_NONE

enumerator ESP_HF_WBS_NO

enumerator ESP_HF_WBS_YES

enum esp_hf_connection_state_t

Bluetooth HFP RFCOMM connection and service level connection status.

Values:

enumerator ESP_HF_CONNECTION_STATE_DISCONNECTED: RFCOMM data link channel released

enumerator ESP_HF_CONNECTION_STATE_CONNECTING: connecting remote device on the RFCOMM data link

enumerator ESP_HF_CONNECTION_STATE_CONNECTED: RFCOMM connection established

enumerator ESP_HF_CONNECTION_STATE_SLC_CONNECTED: service level connection established

enumerator ESP_HF_CONNECTION_STATE_DISCONNECTING: disconnecting with remote device on the RFCOMM data link

enum esp_hf_chld_type_t

AT+CHLD command values.

Values:

enumerator ESP_HF_CHLD_TYPE_REL: <0>, Terminate all held or set UDUB("busy") to a waiting call

enumerator ESP_HF_CHLD_TYPE_REL_ACC: <1>, Terminate all active calls and accepts a waiting/held call

enumerator ESP_HF_CHLD_TYPE_HOLD_ACC: <2>, Hold all active calls and accepts a waiting/held call

enumerator ESP_HF_CHLD_TYPE_MERGE: <3>, Add all held calls to a conference

enumerator ESP_HF_CHLD_TYPE_MERGE_DETACH: <4>, connect the two calls and disconnects the subscriber from both calls

enumerator ESP_HF_CHLD_TYPE_REL_X: <1x>, releases specified calls only

enumerator ESP_HF_CHLD_TYPE_PRIV_X: <2x>, request private consultation mode with specified call

enum esp_hf_at_response_code_t

Values:

enumerator ESP_HF_AT_RESPONSE_CODE_OK: acknowledges execution of a command line

enumerator ESP_HF_AT_RESPONSE_CODE_ERR: command not accepted

enumerator ESP_HF_AT_RESPONSE_CODE_NO_CARRIER: connection terminated

enumerator ESP_HF_AT_RESPONSE_CODE_BUSY: busy signal detected

enumerator ESP_HF_AT_RESPONSE_CODE_NO_ANSWER: connection completion timeout

enumerator ESP_HF_AT_RESPONSE_CODE_DELAYED: delayed

enumerator ESP_HF_AT_RESPONSE_CODE_BLACKLISTED: blacklisted

enumerator ESP_HF_AT_RESPONSE_CODE_CME: CME error

enum esp_hf_at_response_t

Values:

enumerator ESP_HF_AT_RESPONSE_ERROR

enumerator ESP_HF_AT_RESPONSE_OK

enum esp_hf_cme_err_t

Extended Audio Gateway Error Result Code Response.

Values:

enumerator ESP_HF_CME_AG_FAILURE: ag failure

enumerator ESP_HF_CME_NO_CONNECTION_TO_PHONE: no connection to phone

enumerator ESP_HF_CME_OPERATION_NOT_ALLOWED: operation not allowed

enumerator ESP_HF_CME_OPERATION_NOT_SUPPORTED: operation not supported

enumerator ESP_HF_CME_PH_SIM_PIN_REQUIRED: PH-SIM PIN Required

enumerator ESP_HF_CME_SIM_NOT_INSERTED: SIM not inserted

enumerator ESP_HF_CME_SIM_PIN_REQUIRED: SIM PIN required

enumerator ESP_HF_CME_SIM_PUK_REQUIRED: SIM PUK required

enumerator ESP_HF_CME_SIM_FAILURE: SIM failure

enumerator ESP_HF_CME_SIM_BUSY: SIM busy

enumerator ESP_HF_CME_INCORRECT_PASSWORD: incorrect password

enumerator ESP_HF_CME_SIM_PIN2_REQUIRED: SIM PIN2 required

enumerator ESP_HF_CME_SIM_PUK2_REQUIRED: SIM PUK2 required

enumerator ESP_HF_CME_MEMORY_FULL: memory full

enumerator ESP_HF_CME_INVALID_INDEX: invalid index

enumerator ESP_HF_CME_MEMORY_FAILURE: memory failure

enumerator ESP_HF_CME_TEXT_STRING_TOO_LONG: test string too long

enumerator ESP_HF_CME_INVALID_CHARACTERS_IN_TEXT_STRING: invalid characters in text string

enumerator ESP_HF_CME_DIAL_STRING_TOO_LONG: dial string too long

enumerator ESP_HF_CME_INVALID_CHARACTERS_IN_DIAL_STRING: invalid characters in dial string

enumerator ESP_HF_CME_NO_NETWORK_SERVICE: no network service

enumerator ESP_HF_CME_NETWORK_TIMEOUT: network timeout

enumerator ESP_HF_CME_NETWORK_NOT_ALLOWED: network not allowed –emergency calls only

Was this page helpful?

Thank you! We received your feedback.
If you have any comments, fill in Espressif Documentation Feedback Form.

We value your feedback.
Let us know how we can improve this page by filling in Espressif Documentation Feedback Form.