Mbed TLS
Mbed TLS is a C library that implements cryptographic primitives, X.509 certificate manipulation and the SSL/TLS and DTLS protocols. Its small code footprint makes it suitable for embedded systems.
Note
ESP-IDF uses a fork of Mbed TLS which includes a few patches (related to hardware routines of certain modules like bignum (MPI) and ECC) over vanilla Mbed TLS.
Mbed TLS supports TLS 1.2, TLS 1.3 and DTLS 1.2 communication by providing the following:
TCP/IP communication functions: listen, connect, accept, read/write.
SSL/TLS communication functions: init, handshake, read/write.
X.509 functions: CRT, CRL and key handling
Random number generation
Hashing
Encryption/decryption
Note
Mbed TLS v3.x.x series supports only TLS 1.2 and TLS 1.3 protocols. Support for SSL 3.0, TLS 1.0/1.1 and DTLS 1.0 has been removed (deprecated). TLS 1.3 is fully supported starting Mbed TLS v3.6.0 release, before this release some features were still in experimental state. Please refer to Mbed TLS ChangeLog for more details.
Mbed TLS Documentation
For Mbed TLS documentation please refer to the following (upstream) pointers:
Mbed TLS Support in ESP-IDF
Please find the information about the Mbed TLS versions presented in different branches of ESP-IDF here.
Note
Please refer the Mbed TLS to migrate from Mbed TLS version 2.x to version 3.0 or greater.
Application Examples
Examples in ESP-IDF use ESP-TLS which provides a simplified API interface for accessing the commonly used TLS functionality.
Refer to the examples protocols/https_server/simple (Simple HTTPS server) and protocols/https_request (Make HTTPS requests) for more information.
If the Mbed TLS API is to be used directly, refer to the example protocols/https_mbedtls.
Alternatives
ESP-TLS acts as an abstraction layer over the underlying SSL/TLS library and thus has an option to use Mbed TLS or wolfSSL as the underlying library. By default, only Mbed TLS is available and used in ESP-IDF whereas wolfSSL is available publicly at <https://github.com/espressif/esp-wolfSSL> with the upstream submodule pointer.
Please refer to ESP-TLS: Underlying SSL/TLS Library Options docs for more information on this and comparison of Mbed TLS and wolfSSL.
Important Config Options
Following is a brief list of important config options accessible at Component Config -> mbedTLS. The full list of config options can be found here.
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2: Support for TLS 1.2
CONFIG_MBEDTLS_SSL_PROTO_TLS1_3: Support for TLS 1.3
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE: Support for trusted root certificate bundle (more about this: ESP x509 Certificate Bundle)
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS: Support for TLS Session Resumption: Client session tickets
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS: Support for TLS Session Resumption: Server session tickets
CONFIG_MBEDTLS_HARDWARE_SHA: Support for hardware SHA acceleration
CONFIG_MBEDTLS_HARDWARE_AES: Support for hardware AES acceleration
CONFIG_MBEDTLS_HARDWARE_MPI: Support for hardware MPI (bignum) acceleration
CONFIG_MBEDTLS_HARDWARE_ECC: Support for hardware ECC acceleration
Performance and Memory Tweaks
Reducing Heap Usage
The following table shows typical memory usage with different configs when the protocols/https_request example (with Server Validation enabled) was run with Mbed TLS as the SSL/TLS library.
Mbed TLS Test |
Related Configs |
Heap Usage (approx.) |
|---|---|---|
Default |
NA |
42196 B |
Enable SSL Variable Length |
42120 B |
|
Disable Keep Peer Certificate |
38533 B |
|
Enable Dynamic TX/RX Buffer |
CONFIG_MBEDTLS_DYNAMIC_BUFFER CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA CONFIG_MBEDTLS_DYNAMIC_FREE_CA_CERT |
22013 B |
Note
These values are subject to change with change in configuration options and versions of Mbed TLS.
Reducing Binary Size
Under Component Config -> mbedTLS, there are multiple Mbed TLS features which are enabled by default but can be disabled if not needed to save code size. More information can be about this can be found in Minimizing Binary Size docs.