Get Started (Legacy GNU Make)¶
Since ESP-IDF V4.0, the default build system is based on CMake. This documentation is for the legacy build system based on GNU Make. Support for this build system may be removed in future major releases.
This document is intended to help you set up the software development environment for the hardware based on Espressif ESP32.
After that, a simple example will show you how to use ESP-IDF (Espressif IoT Development Framework) for menu configuration, then for building and flashing firmware onto an ESP32 board.
This is documentation for stable version v4.3.2 of ESP-IDF. Other ESP-IDF Versions are also available.
ESP32 is a system on a chip that integrates the following features:
Wi-Fi (2.4 GHz band)
Dual high performance cores
Ultra Low Power co-processor
Powered by 40 nm technology, ESP32 provides a robust, highly integrated platform, which helps meet the continuous demands for efficient power usage, compact design, security, high performance, and reliability.
Espressif provides basic hardware and software resources to help application developers realize their ideas using the ESP32 series hardware. The software development framework by Espressif is intended for development of Internet-of-Things (IoT) applications with Wi-Fi, Bluetooth, power management and several other system features.
What You Need¶
An ESP32 board
USB cable - USB A / micro USB B
Computer running Windows, Linux, or macOS
Toolchain to build the Application for ESP32
ESP-IDF that essentially contains API (software libraries and source code) for ESP32 and scripts to operate the Toolchain
Text editor to write programs (Projects) in C, e.g., Eclipse
Development Board Overviews¶
If you have one of ESP32 development boards listed below, you can click on the link to learn more about its hardware.
Installation Step by Step¶
This is a detailed roadmap to walk you through the installation process.
Setting up Development Environment¶
Step 1. Set up the Toolchain¶
The toolchain is a set of programs for compiling code and building applications.
The quickest way to start development with ESP32 is by installing a prebuilt toolchain. Pick up your OS below and follow the provided instructions.
This guide uses the directory
~/esp on Linux and macOS or
%userprofile%\esp on Windows as an installation folder for ESP-IDF. You can use any directory, but you will need to adjust paths for the commands respectively. Keep in mind that ESP-IDF does not support spaces in paths.
Depending on your experience and preferences, you may want to customize your environment instead of using a prebuilt toolchain. To set up the system your own way go to Section Customized Setup of Toolchain (Legacy GNU Make).
Step 2. Get ESP-IDF¶
Besides the toolchain, you also need ESP32-specific API (software libraries and source code). They are provided by Espressif in ESP-IDF repository.
To get a local copy of ESP-IDF, navigate to your installation directory and clone the repository with
Open Terminal, and run the following commands:
mkdir -p ~/esp cd ~/esp git clone -b v4.3.2 --recursive https://github.com/espressif/esp-idf.git
ESP-IDF will be downloaded into
Consult ESP-IDF Versions for information about which ESP-IDF version to use in a given situation.
git clone option
-b v4.3.2 tells git to clone the tag in the ESP-IDF repository
git clone corresponding to this version of the documentation.
As a fallback, it is also possible to download a zip file of this stable release from the Releases page. Do not download the “Source code” zip file(s) generated automatically by GitHub, they do not work with ESP-IDF.
Do not miss the
--recursive option. If you have already cloned ESP-IDF without this option, run another command to get all the submodules:
cd esp-idf git submodule update --init
Step 3. Set Environment Variables¶
The toolchain uses the environment variable
IDF_PATH to access the ESP-IDF directory. This variable should be set up on your computer, otherwise projects will not build.
Step 4. Install the Required Python Packages¶
The python packages required by ESP-IDF are located in
IDF_PATH/requirements.txt. You can install them by running:
python -m pip install --user -r $IDF_PATH/requirements.txt
Please check the version of the Python interpreter that you will be using with ESP-IDF. For this, run
python --version and depending on the result, you might want to use
or similar instead of just
python3 -m pip install --user -r $IDF_PATH/requirements.txt
Step 5. Start a Project¶
Copy get-started/hello_world to the
Linux and macOS¶
cd ~/esp cp -r $IDF_PATH/examples/get-started/hello_world .
cd %userprofile%\esp xcopy /e /i %IDF_PATH%\examples\get-started\hello_world hello_world
There is a range of example projects in the examples directory in ESP-IDF. You can copy any project in the same way as presented above and run it.
It is also possible to build examples in-place, without copying them first.
The esp-idf build system does not support spaces in the paths to either esp-idf or to projects.
Step 6. Connect Your Device¶
Now connect your ESP32 board to the computer and check under what serial port the board is visible.
Serial ports have the following patterns in their names:
Windows: names like
Linux: starting with
macOS: starting with
If you are not sure how to check the serial port name, please refer to Establish Serial Connection with ESP32 (Legacy GNU Make) for full details.
Keep the port name handy as you will need it in the next steps.
Step 7. Configure¶
Navigate to your
hello_world directory from Step 5. Start a Project and run the project configuration utility
Linux and macOS¶
cd ~/esp/hello_world make menuconfig
cd %userprofile%\esp\hello_world make menuconfig
If the previous steps have been done correctly, the following menu appears:
In the menu, navigate to
Serial flasher config >
Default serial port to configure the serial port, where project will be loaded to. Confirm selection by pressing enter, save configuration by selecting
< Save > and then exit
menuconfig by selecting
< Exit >.
To navigate and use
menuconfig, press the following keys:
Arrow keys for navigation
Enterto go into a submenu
Escto go up one level or exit
?to see a help screen. Enter key exits the help screen
Nkeys to enable (Yes) and disable (No) configuration items with checkboxes “
?while highlighting a configuration item to display help about that item
/to find configuration items
If you use ESP32-DevKitC board with the ESP32-SOLO-1 module, enable single core mode (CONFIG_FREERTOS_UNICORE) in menuconfig before flashing examples.
Step 8. Build and Flash¶
Build and flash the project by running:
This command will compile the application and all ESP-IDF components, then it will generate the bootloader, partition table, and application binaries. After that, these binaries will be flashed onto your ESP32 board.
Encountered Issues While Flashing?¶
If you run the given command and see errors such as “Failed to connect”, there might be several reasons for this. One of the reasons might be issues encountered by
esptool.py, the utility that is called by the build system to reset the chip, interact with the ROM bootloader, and flash firmware. One simple solution to try is manual reset described below, and if it does not help you can find more details about possible issues in Troubleshooting.
esptool.py resets ESP32 automatically by asserting DTR and RTS control lines of the USB to serial converter chip, i.e., FTDI or CP210x (for more information, see Establish Serial Connection with ESP32 (Legacy GNU Make)). The DTR and RTS control lines are in turn connected to
CHIP_PU (EN) pins of ESP32, thus changes in the voltage levels of DTR and RTS will boot ESP32 into Firmware Download mode. As an example, check the schematic for ESP32 DevKitC V4 development board.
In general, you should have no problems with the official esp-idf development boards. However,
esptool.py is not able to reset your hardware automatically in the following cases:
Your hardware does not have the DTR and RTS lines connected to
The DTR and RTS lines are configured differently
There are no such serial control lines at all
Depending on the kind of hardware you have, it may also be possible to manually put your ESP32 board into Firmware Download mode (reset).
For development boards produced by Espressif, this information can be found in the respective getting started guides or user guides. For example, to manually reset an esp-idf development board, hold down the Boot button (
GPIO0) and press the EN button (
For other types of hardware, try pulling
If there are no issues by the end of the flash process, you will see the output log similar to the one given below. Then the board will reboot and start up the “hello_world” application.
esptool.py v3.0-dev Flashing binaries to serial port /dev/ttyUSB0 (app at offset 0x10000)... esptool.py v3.0-dev Serial port /dev/cu.SLAB_USBtoUART Connecting........____ Chip is ESP32D0WDQ6 (revision 1) Features: WiFi, BT, Dual Core, Coding Scheme None Crystal is 40MHz MAC: 30:ae:a4:15:21:b4 Uploading stub... Running stub... Stub running... Configuring flash size... Auto-detected Flash size: 4MB Flash params set to 0x0220 Compressed 26704 bytes to 15930... Wrote 26704 bytes (15930 compressed) at 0x00001000 in 1.4 seconds (effective 151.9 kbit/s)... Hash of data verified. Compressed 147984 bytes to 77738... Wrote 147984 bytes (77738 compressed) at 0x00010000 in 6.9 seconds (effective 172.7 kbit/s)... Hash of data verified. Compressed 3072 bytes to 103... Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 1607.9 kbit/s)... Hash of data verified. Leaving... Hard resetting via RTS pin...
If you’d like to use the Eclipse IDE instead of running
make, check out the Eclipse guide.
Step 9. Monitor¶
To check if “hello_world” is indeed running, type
This command launches the IDF Monitor application:
$ make monitor MONITOR --- idf_monitor on /dev/ttyUSB0 115200 --- --- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H --- ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) ets Jun 8 2016 00:22:57 ...
After startup and diagnostic logs scroll up, you should see “Hello world!” printed out by the application.
... Hello world! This is esp32 chip with 2 CPU cores, WiFi/BT/BLE, silicon revision 1, 4MB external flash Restarting in 10 seconds... Restarting in 9 seconds... Restarting in 8 seconds... Restarting in 7 seconds...
To exit IDF monitor use the shortcut
If IDF monitor fails shortly after the upload, or if instead of the messages above you see a random garbage similar to what is given below, your board is likely using a 26MHz crystal. Most development board designs use 40MHz, so ESP-IDF uses this frequency as a default value.
If you have such a problem, do the following:
Exit the monitor.
Go back to menuconfig.
Go to Component config –> ESP32-specific –> Main XTAL frequency, then change CONFIG_ESP32_XTAL_FREQ_SEL to 26MHz.
After that, build and flash the application again.
You can combine building, flashing and monitoring into one step by running:
make flash monitor
See also IDF Monitor for handy shortcuts and more details on using IDF monitor.
That’s all that you need to get started with ESP32!
Now you are ready to try some other examples, or go straight to developing your own applications.
Some environment variables can be specified whilst calling
make allowing users to override arguments without the need to reconfigure them using
Description & Usage
Overrides the serial port used in
Overrides the serial baud rate when flashing the ESP32.
Overrides the serial baud rate used when monitoring.
You can export environment variables (e.g.
All subsequent calls of
make within the same terminal session will use
the exported value given that the variable is not simultaneously overridden.
You should update ESP-IDF from time to time, as newer versions fix bugs and provide new features. The simplest way to do the update is to delete the existing
esp-idf folder and clone it again, as if performing the initial installation described in Step 2. Get ESP-IDF.
If downloading to a new path, remember to Add IDF_PATH to User Profile (Legacy GNU Make) so that the toolchain scripts can find ESP-IDF in its release specific location.
Another solution is to update only what has changed. The update procedure depends on the version of ESP-IDF you are using.