Heap Memory Allocation

Stack and Heap

ESP-IDF applications use the common computer architecture patterns of stack (dynamic memory allocated by program control flow) and heap (dynamic memory allocated by function calls), as well as statically allocated memory (allocated at compile time).

Because ESP-IDF is a multi-threaded RTOS environment, each RTOS task has its own stack. By default, each of these stacks is allocated from the heap when the task is created. (See xTaskCreateStatic() for the alternative where stacks are statically allocated.)

Because ESP32-C3 uses multiple types of RAM, it also contains multiple heaps with different capabilities. A capabilities-based memory allocator allows apps to make heap allocations for different purposes.

For most purposes, the standard libc malloc() and free() functions can be used for heap allocation without any special consideration.

However, in order to fully make use of all of the memory types and their characteristics, ESP-IDF also has a capabilities-based heap memory allocator. If you want to have memory with certain properties (for example, DMA-Capable Memory or executable-memory), you can create an OR-mask of the required capabilities and pass that to heap_caps_malloc().

Memory Capabilities

The ESP32-C3 contains multiple types of RAM:

DRAM (Data RAM) is memory used to hold data. This is the most common kind of memory accessed as heap.
IRAM (Instruction RAM) usually holds executable data only. If accessed as generic memory, all accesses must be 32-bit aligned.
D/IRAM is RAM which can be used as either Instruction or Data RAM.

For more details on these internal memory types, see Memory Types.

DRAM uses capability MALLOC_CAP_8BIT (accessible in single byte reads and writes). To test the free DRAM heap size at runtime, call cpp:func:heap_caps_get_free_size(MALLOC_CAP_8BIT).

When calling malloc(), the ESP-IDF malloc() implementation internally calls cpp:func:heap_caps_malloc_default(size). This will allocate memory with capability MALLOC_CAP_DEFAULT, which is byte-addressable.

Because malloc() uses the capabilities-based allocation system, memory allocated using heap_caps_malloc() can be freed by calling the standard free() function.

Available Heap

DRAM

At startup, the DRAM heap contains all data memory which is not statically allocated by the app. Reducing statically allocated buffers will increase the amount of available free heap.

To find the amount of statically allocated memory, use the idf.py size command.

Note

At runtime, the available heap DRAM may be less than calculated at compile time, because at startup some memory is allocated from the heap before the FreeRTOS scheduler is started (including memory for the stacks of initial FreeRTOS tasks).

IRAM

At startup, the IRAM heap contains all instruction memory which is not used by the app executable code.

The idf.py size command can be used to find the amount of IRAM used by the app.

D/IRAM

Some memory in the ESP32-C3 is available as either DRAM or IRAM. If memory is allocated from a D/IRAM region, the free heap size for both types of memory will decrease.

Heap Sizes

At startup, all ESP-IDF apps log a summary of all heap addresses (and sizes) at level Info:

I (252) heap_init: Initializing. RAM available for dynamic allocation:
I (259) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (265) heap_init: At 3FFB2EC8 len 0002D138 (180 KiB): DRAM
I (272) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (278) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (284) heap_init: At 4008944C len 00016BB4 (90 KiB): IRAM

Finding available heap

See Heap Information.

Special Capabilities

DMA-Capable Memory

Use the MALLOC_CAP_DMA flag to allocate memory which is suitable for use with hardware DMA engines (for example SPI and I2S). This capability flag excludes any external PSRAM.

32-Bit Accessible Memory

If a certain memory structure is only addressed in 32-bit units, for example an array of ints or pointers, it can be useful to allocate it with the MALLOC_CAP_32BIT flag. This also allows the allocator to give out IRAM memory; something which it can't do for a normal malloc() call. This can help to use all the available memory in the ESP32-C3.

Memory allocated with MALLOC_CAP_32BIT can only be accessed via 32-bit reads and writes, any other type of access will generate a fatal LoadStoreError exception.

Thread Safety

Heap functions are thread safe, meaning they can be called from different tasks simultaneously without any limitations.

It is technically possible to call malloc, free, and related functions from interrupt handler (ISR) context (see Calling heap related functions from ISR). However this is not recommended, as heap function calls may delay other interrupts. It is strongly recommended to refactor applications so that any buffers used by an ISR are pre-allocated outside of the ISR. Support for calling heap functions from ISRs may be removed in a future update.

Heap Tracing & Debugging

The following features are documented on the Heap Memory Debugging page:

Heap Information (free space, etc.)
Heap allocation and free function hooks
Heap Corruption Detection
Heap Tracing (memory leak detection, monitoring, etc.)

Implementation Notes

Knowledge about the regions of memory in the chip comes from the "soc" component, which contains memory layout information for the chip, and the different capabilities of each region. Each region's capabilities are prioritised, so that (for example) dedicated DRAM and IRAM regions will be used for allocations ahead of the more versatile D/IRAM regions.

Each contiguous region of memory contains its own memory heap. The heaps are created using the multi_heap functionality. multi_heap allows any contiguous region of memory to be used as a heap.

The heap capabilities allocator uses knowledge of the memory regions to initialize each individual heap. Allocation functions in the heap capabilities API will find the most appropriate heap for the allocation (based on desired capabilities, available space, and preferences for each region's use) and then calling multi_heap_malloc() for the heap situated in that particular region.

Calling free() involves finding the particular heap corresponding to the freed address, and then calling multi_heap_free() on that particular multi_heap instance.

API Reference - Heap Allocation

Header File

components/heap/include/esp_heap_caps.h

Functions

esp_err_t heap_caps_register_failed_alloc_callback(esp_alloc_failed_hook_t callback)

registers a callback function to be invoked if a memory allocation operation fails

Parameters: callback -- caller defined callback to be invoked
Returns: ESP_OK if callback was registered.

void *heap_caps_malloc(size_t size, uint32_t caps)

Allocate a chunk of memory which has the given capabilities.

Equivalent semantics to libc malloc(), for capability-aware memory.

Parameters

size -- Size, in bytes, of the amount of memory to allocate
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory to be returned

Returns

A pointer to the memory allocated on success, NULL on failure

void heap_caps_free(void *ptr)

Free memory previously allocated via heap_caps_malloc() or heap_caps_realloc().

Equivalent semantics to libc free(), for capability-aware memory.

In IDF, free(p) is equivalent to heap_caps_free(p).

Parameters: ptr -- Pointer to memory previously returned from heap_caps_malloc() or heap_caps_realloc(). Can be NULL.

void *heap_caps_realloc(void *ptr, size_t size, uint32_t caps)

Reallocate memory previously allocated via heap_caps_malloc() or heap_caps_realloc().

Equivalent semantics to libc realloc(), for capability-aware memory.

In IDF, realloc(p, s) is equivalent to heap_caps_realloc(p, s, MALLOC_CAP_8BIT).

'caps' parameter can be different to the capabilities that any original 'ptr' was allocated with. In this way, realloc can be used to "move" a buffer if necessary to ensure it meets a new set of capabilities.

Parameters

ptr -- Pointer to previously allocated memory, or NULL for a new allocation.
size -- Size of the new buffer requested, or 0 to free the buffer.
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory desired for the new allocation.

Returns

Pointer to a new buffer of size 'size' with capabilities 'caps', or NULL if allocation failed.

void *heap_caps_aligned_alloc(size_t alignment, size_t size, uint32_t caps)

Allocate an aligned chunk of memory which has the given capabilities.

Equivalent semantics to libc aligned_alloc(), for capability-aware memory.

Parameters

alignment -- How the pointer received needs to be aligned must be a power of two
size -- Size, in bytes, of the amount of memory to allocate
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory to be returned

Returns

A pointer to the memory allocated on success, NULL on failure

void heap_caps_aligned_free(void *ptr)

Used to deallocate memory previously allocated with heap_caps_aligned_alloc.

Note

This function is deprecated, please consider using heap_caps_free() instead

Parameters: ptr -- Pointer to the memory allocated

void *heap_caps_aligned_calloc(size_t alignment, size_t n, size_t size, uint32_t caps)

Allocate an aligned chunk of memory which has the given capabilities. The initialized value in the memory is set to zero.

Parameters

alignment -- How the pointer received needs to be aligned must be a power of two
n -- Number of continuing chunks of memory to allocate
size -- Size, in bytes, of a chunk of memory to allocate
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory to be returned

Returns

A pointer to the memory allocated on success, NULL on failure

void *heap_caps_calloc(size_t n, size_t size, uint32_t caps)

Allocate a chunk of memory which has the given capabilities. The initialized value in the memory is set to zero.

Equivalent semantics to libc calloc(), for capability-aware memory.

In IDF, calloc(p) is equivalent to heap_caps_calloc(p, MALLOC_CAP_8BIT).

Parameters

n -- Number of continuing chunks of memory to allocate
size -- Size, in bytes, of a chunk of memory to allocate
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory to be returned

Returns

A pointer to the memory allocated on success, NULL on failure

size_t heap_caps_get_total_size(uint32_t caps)

Get the total size of all the regions that have the given capabilities.

This function takes all regions capable of having the given capabilities allocated in them and adds up the total space they have.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory
Returns: total size in bytes

size_t heap_caps_get_free_size(uint32_t caps)

Get the total free size of all the regions that have the given capabilities.

This function takes all regions capable of having the given capabilities allocated in them and adds up the free space they have.

Note

Note that because of heap fragmentation it is probably not possible to allocate a single block of memory of this size. Use heap_caps_get_largest_free_block() for this purpose.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory
Returns: Amount of free bytes in the regions

size_t heap_caps_get_minimum_free_size(uint32_t caps)

Get the total minimum free memory of all regions with the given capabilities.

This adds all the low watermarks of the regions capable of delivering the memory with the given capabilities.

Note

Note the result may be less than the global all-time minimum available heap of this kind, as "low watermarks" are tracked per-region. Individual regions' heaps may have reached their "low watermarks" at different points in time. However, this result still gives a "worst case" indication for all-time minimum free heap.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory
Returns: Amount of free bytes in the regions

size_t heap_caps_get_largest_free_block(uint32_t caps)

Get the largest free block of memory able to be allocated with the given capabilities.

Returns the largest value of s for which heap_caps_malloc(s, caps) will succeed.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory
Returns: Size of the largest free block in bytes.

void heap_caps_get_info(multi_heap_info_t *info, uint32_t caps)

Get heap info for all regions with the given capabilities.

Calls multi_heap_info() on all heaps which share the given capabilities. The information returned is an aggregate across all matching heaps. The meanings of fields are the same as defined for multi_heap_info_t, except that minimum_free_bytes has the same caveats described in heap_caps_get_minimum_free_size().

Parameters

info -- Pointer to a structure which will be filled with relevant heap metadata.
caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory

void heap_caps_print_heap_info(uint32_t caps)

Print a summary of all memory with the given capabilities.

Calls multi_heap_info on all heaps which share the given capabilities, and prints a two-line summary for each, then a total summary.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory

bool heap_caps_check_integrity_all(bool print_errors)

Check integrity of all heap memory in the system.

Calls multi_heap_check on all heaps. Optionally print errors if heaps are corrupt.

Calling this function is equivalent to calling heap_caps_check_integrity with the caps argument set to MALLOC_CAP_INVALID.

Note

Please increase the value of CONFIG_ESP_INT_WDT_TIMEOUT_MS when using this API with PSRAM enabled.

Parameters: print_errors -- Print specific errors if heap corruption is found.
Returns: True if all heaps are valid, False if at least one heap is corrupt.

bool heap_caps_check_integrity(uint32_t caps, bool print_errors)

Check integrity of all heaps with the given capabilities.

Calls multi_heap_check on all heaps which share the given capabilities. Optionally print errors if the heaps are corrupt.

See also heap_caps_check_integrity_all to check all heap memory in the system and heap_caps_check_integrity_addr to check memory around a single address.

Note

Please increase the value of CONFIG_ESP_INT_WDT_TIMEOUT_MS when using this API with PSRAM capability flag.

Parameters

caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory
print_errors -- Print specific errors if heap corruption is found.

Returns

True if all heaps are valid, False if at least one heap is corrupt.

bool heap_caps_check_integrity_addr(intptr_t addr, bool print_errors)

Check integrity of heap memory around a given address.

This function can be used to check the integrity of a single region of heap memory, which contains the given address.

This can be useful if debugging heap integrity for corruption at a known address, as it has a lower overhead than checking all heap regions. Note that if the corrupt address moves around between runs (due to timing or other factors) then this approach won't work, and you should call heap_caps_check_integrity or heap_caps_check_integrity_all instead.

Note

The entire heap region around the address is checked, not only the adjacent heap blocks.

Parameters

addr -- Address in memory. Check for corruption in region containing this address.
print_errors -- Print specific errors if heap corruption is found.

Returns

True if the heap containing the specified address is valid, False if at least one heap is corrupt or the address doesn't belong to a heap region.

void heap_caps_malloc_extmem_enable(size_t limit)

Enable malloc() in external memory and set limit below which malloc() attempts are placed in internal memory.

When external memory is in use, the allocation strategy is to initially try to satisfy smaller allocation requests with internal memory and larger requests with external memory. This sets the limit between the two, as well as generally enabling allocation in external memory.

Parameters: limit -- Limit, in bytes.

void *heap_caps_malloc_prefer(size_t size, size_t num, ...)

Allocate a chunk of memory as preference in decreasing order.

Attention: The variable parameters are bitwise OR of MALLOC_CAP_* flags indicating the type of memory. This API prefers to allocate memory with the first parameter. If failed, allocate memory with the next parameter. It will try in this order until allocating a chunk of memory successfully or fail to allocate memories with any of the parameters.

Parameters

size -- Size, in bytes, of the amount of memory to allocate
num -- Number of variable parameters

Returns

A pointer to the memory allocated on success, NULL on failure

void *heap_caps_realloc_prefer(void *ptr, size_t size, size_t num, ...)

Reallocate a chunk of memory as preference in decreasing order.

Parameters

ptr -- Pointer to previously allocated memory, or NULL for a new allocation.
size -- Size of the new buffer requested, or 0 to free the buffer.
num -- Number of variable paramters

Returns

Pointer to a new buffer of size 'size', or NULL if allocation failed.

void *heap_caps_calloc_prefer(size_t n, size_t size, size_t num, ...)

Allocate a chunk of memory as preference in decreasing order.

Parameters

n -- Number of continuing chunks of memory to allocate
size -- Size, in bytes, of a chunk of memory to allocate
num -- Number of variable paramters

Returns

A pointer to the memory allocated on success, NULL on failure

void heap_caps_dump(uint32_t caps)

Dump the full structure of all heaps with matching capabilities.

Prints a large amount of output to serial (because of locking limitations, the output bypasses stdout/stderr). For each (variable sized) block in each matching heap, the following output is printed on a single line:

Block address (the data buffer returned by malloc is 4 bytes after this if heap debugging is set to Basic, or 8 bytes otherwise).
Data size (the data size may be larger than the size requested by malloc, either due to heap fragmentation or because of heap debugging level).
Address of next block in the heap.
If the block is free, the address of the next free block is also printed.

Parameters: caps -- Bitwise OR of MALLOC_CAP_* flags indicating the type of memory

void heap_caps_dump_all(void)

Dump the full structure of all heaps.

Covers all registered heaps. Prints a large amount of output to serial.

Output is the same as for heap_caps_dump.

size_t heap_caps_get_allocated_size(void *ptr)

Return the size that a particular pointer was allocated with.

Note

The app will crash with an assertion failure if the pointer is not valid.

Parameters: ptr -- Pointer to currently allocated heap memory. Must be a pointer value previously returned by heap_caps_malloc, malloc, calloc, etc. and not yet freed.
Returns: Size of the memory allocated at this block.

Macros

HEAP_IRAM_ATTR

MALLOC_CAP_EXEC

Flags to indicate the capabilities of the various memory systems.

Memory must be able to run executable code

MALLOC_CAP_32BIT: Memory must allow for aligned 32-bit data accesses.

MALLOC_CAP_8BIT: Memory must allow for 8/16/...-bit data accesses.

MALLOC_CAP_DMA: Memory must be able to accessed by DMA.

MALLOC_CAP_PID2: Memory must be mapped to PID2 memory space (PIDs are not currently used)

MALLOC_CAP_PID3: Memory must be mapped to PID3 memory space (PIDs are not currently used)

MALLOC_CAP_PID4: Memory must be mapped to PID4 memory space (PIDs are not currently used)

MALLOC_CAP_PID5: Memory must be mapped to PID5 memory space (PIDs are not currently used)

MALLOC_CAP_PID6: Memory must be mapped to PID6 memory space (PIDs are not currently used)

MALLOC_CAP_PID7: Memory must be mapped to PID7 memory space (PIDs are not currently used)

MALLOC_CAP_SPIRAM: Memory must be in SPI RAM.

MALLOC_CAP_INTERNAL: Memory must be internal; specifically it should not disappear when flash/spiram cache is switched off.

MALLOC_CAP_DEFAULT: Memory can be returned in a non-capability-specific memory allocation (e.g. malloc(), calloc()) call.

MALLOC_CAP_IRAM_8BIT: Memory must be in IRAM and allow unaligned access.

MALLOC_CAP_RETENTION: Memory must be able to accessed by retention DMA.

MALLOC_CAP_RTCRAM: Memory must be in RTC fast memory.

MALLOC_CAP_INVALID: Memory can't be used / list end marker.

Type Definitions

typedef void (*esp_alloc_failed_hook_t)(size_t size, uint32_t caps, const char *function_name)

callback called when an allocation operation fails, if registered

Param size: in bytes of failed allocation
Param caps: capabilities requested of failed allocation
Param function_name: function which generated the failure

API Reference - Initialisation

Header File

components/heap/include/esp_heap_caps_init.h

Functions

void heap_caps_init(void)

Initialize the capability-aware heap allocator.

This is called once in the IDF startup code. Do not call it at other times.

void heap_caps_enable_nonos_stack_heaps(void)

Enable heap(s) in memory regions where the startup stacks are located.

On startup, the pro/app CPUs have a certain memory region they use as stack, so we cannot do allocations in the regions these stack frames are. When FreeRTOS is completely started, they do not use that memory anymore and heap(s) there can be enabled.

esp_err_t heap_caps_add_region(intptr_t start, intptr_t end)

Add a region of memory to the collection of heaps at runtime.

Most memory regions are defined in soc_memory_layout.c for the SoC, and are registered via heap_caps_init(). Some regions can't be used immediately and are later enabled via heap_caps_enable_nonos_stack_heaps().

Call this function to add a region of memory to the heap at some later time.

This function does not consider any of the "reserved" regions or other data in soc_memory_layout, caller needs to consider this themselves.

All memory within the region specified by start & end parameters must be otherwise unused.

The capabilities of the newly registered memory will be determined by the start address, as looked up in the regions specified in soc_memory_layout.c.

Use heap_caps_add_region_with_caps() to register a region with custom capabilities.

Note

Please refer to following example for memory regions allowed for addition to heap based on an existing region (address range for demonstration purpose only):

      Existing region: 0x1000 <-> 0x3000
      New region:      0x1000 <-> 0x3000 (Allowed)
      New region:      0x1000 <-> 0x2000 (Allowed)
      New region:      0x0000 <-> 0x1000 (Allowed)
      New region:      0x3000 <-> 0x4000 (Allowed)
      New region:      0x0000 <-> 0x2000 (NOT Allowed)
      New region:      0x0000 <-> 0x4000 (NOT Allowed)
      New region:      0x1000 <-> 0x4000 (NOT Allowed)
      New region:      0x2000 <-> 0x4000 (NOT Allowed)

Parameters

start -- Start address of new region.
end -- End address of new region.

Returns

ESP_OK on success, ESP_ERR_INVALID_ARG if a parameter is invalid, ESP_ERR_NOT_FOUND if the specified start address doesn't reside in a known region, or any error returned by heap_caps_add_region_with_caps().

esp_err_t heap_caps_add_region_with_caps(const uint32_t caps[], intptr_t start, intptr_t end)

Add a region of memory to the collection of heaps at runtime, with custom capabilities.

Similar to heap_caps_add_region(), only custom memory capabilities are specified by the caller.

Note

Please refer to following example for memory regions allowed for addition to heap based on an existing region (address range for demonstration purpose only):

      Existing region: 0x1000 <-> 0x3000
      New region:      0x1000 <-> 0x3000 (Allowed)
      New region:      0x1000 <-> 0x2000 (Allowed)
      New region:      0x0000 <-> 0x1000 (Allowed)
      New region:      0x3000 <-> 0x4000 (Allowed)
      New region:      0x0000 <-> 0x2000 (NOT Allowed)
      New region:      0x0000 <-> 0x4000 (NOT Allowed)
      New region:      0x1000 <-> 0x4000 (NOT Allowed)
      New region:      0x2000 <-> 0x4000 (NOT Allowed)

Parameters

caps -- Ordered array of capability masks for the new region, in order of priority. Must have length SOC_MEMORY_TYPE_NO_PRIOS. Does not need to remain valid after the call returns.
start -- Start address of new region.
end -- End address of new region.

Returns

ESP_OK on success
ESP_ERR_INVALID_ARG if a parameter is invalid
ESP_ERR_NO_MEM if no memory to register new heap.
ESP_ERR_INVALID_SIZE if the memory region is too small to fit a heap
ESP_FAIL if region overlaps the start and/or end of an existing region

API Reference - Multi Heap API

(Note: The multi heap API is used internally by the heap capabilities allocator. Most IDF programs will never need to call this API directly.)

Header File

components/heap/include/multi_heap.h

Functions

void *multi_heap_aligned_alloc(multi_heap_handle_t heap, size_t size, size_t alignment)

allocate a chunk of memory with specific alignment

Parameters

heap -- Handle to a registered heap.
size -- size in bytes of memory chunk
alignment -- how the memory must be aligned

Returns

pointer to the memory allocated, NULL on failure

void *multi_heap_malloc(multi_heap_handle_t heap, size_t size)

malloc() a buffer in a given heap

Semantics are the same as standard malloc(), only the returned buffer will be allocated in the specified heap.

Parameters

heap -- Handle to a registered heap.
size -- Size of desired buffer.

Returns

Pointer to new memory, or NULL if allocation fails.

void multi_heap_aligned_free(multi_heap_handle_t heap, void *p)

free() a buffer aligned in a given heap.

Note

This function is deprecated, consider using multi_heap_free() instead

Parameters

heap -- Handle to a registered heap.
p -- NULL, or a pointer previously returned from multi_heap_aligned_alloc() for the same heap.

void multi_heap_free(multi_heap_handle_t heap, void *p)

free() a buffer in a given heap.

Semantics are the same as standard free(), only the argument 'p' must be NULL or have been allocated in the specified heap.

Parameters

heap -- Handle to a registered heap.
p -- NULL, or a pointer previously returned from multi_heap_malloc() or multi_heap_realloc() for the same heap.

void *multi_heap_realloc(multi_heap_handle_t heap, void *p, size_t size)

realloc() a buffer in a given heap.

Semantics are the same as standard realloc(), only the argument 'p' must be NULL or have been allocated in the specified heap.

Parameters

heap -- Handle to a registered heap.
p -- NULL, or a pointer previously returned from multi_heap_malloc() or multi_heap_realloc() for the same heap.
size -- Desired new size for buffer.

Returns

New buffer of 'size' containing contents of 'p', or NULL if reallocation failed.

size_t multi_heap_get_allocated_size(multi_heap_handle_t heap, void *p)

Return the size that a particular pointer was allocated with.

Parameters

heap -- Handle to a registered heap.
p -- Pointer, must have been previously returned from multi_heap_malloc() or multi_heap_realloc() for the same heap.

Returns

Size of the memory allocated at this block. May be more than the original size argument, due to padding and minimum block sizes.

multi_heap_handle_t multi_heap_register(void *start, size_t size)

Register a new heap for use.

This function initialises a heap at the specified address, and returns a handle for future heap operations.

There is no equivalent function for deregistering a heap - if all blocks in the heap are free, you can immediately start using the memory for other purposes.

Parameters

start -- Start address of the memory to use for a new heap.
size -- Size (in bytes) of the new heap.

Returns

Handle of a new heap ready for use, or NULL if the heap region was too small to be initialised.

void multi_heap_set_lock(multi_heap_handle_t heap, void *lock)

Associate a private lock pointer with a heap.

The lock argument is supplied to the MULTI_HEAP_LOCK() and MULTI_HEAP_UNLOCK() macros, defined in multi_heap_platform.h.

The lock in question must be recursive.

When the heap is first registered, the associated lock is NULL.

Parameters

heap -- Handle to a registered heap.
lock -- Optional pointer to a locking structure to associate with this heap.

void multi_heap_dump(multi_heap_handle_t heap)

Dump heap information to stdout.

For debugging purposes, this function dumps information about every block in the heap to stdout.

Parameters: heap -- Handle to a registered heap.

bool multi_heap_check(multi_heap_handle_t heap, bool print_errors)

Check heap integrity.

Walks the heap and checks all heap data structures are valid. If any errors are detected, an error-specific message can be optionally printed to stderr. Print behaviour can be overridden at compile time by defining MULTI_CHECK_FAIL_PRINTF in multi_heap_platform.h.

Note

This function is not thread-safe as it sets a global variable with the value of print_errors.

Parameters

heap -- Handle to a registered heap.
print_errors -- If true, errors will be printed to stderr.

Returns

true if heap is valid, false otherwise.

size_t multi_heap_free_size(multi_heap_handle_t heap)

Return free heap size.

Returns the number of bytes available in the heap.

Equivalent to the total_free_bytes member returned by multi_heap_get_heap_info().

Note that the heap may be fragmented, so the actual maximum size for a single malloc() may be lower. To know this size, see the largest_free_block member returned by multi_heap_get_heap_info().

Parameters: heap -- Handle to a registered heap.
Returns: Number of free bytes.

size_t multi_heap_minimum_free_size(multi_heap_handle_t heap)

Return the lifetime minimum free heap size.

Equivalent to the minimum_free_bytes member returned by multi_heap_get_info().

Returns the lifetime "low watermark" of possible values returned from multi_free_heap_size(), for the specified heap.

Parameters: heap -- Handle to a registered heap.
Returns: Number of free bytes.

void multi_heap_get_info(multi_heap_handle_t heap, multi_heap_info_t *info)

Return metadata about a given heap.

Fills a multi_heap_info_t structure with information about the specified heap.

Parameters

heap -- Handle to a registered heap.
info -- Pointer to a structure to fill with heap metadata.

Structures

struct multi_heap_info_t

Structure to access heap metadata via multi_heap_get_info.

Public Members

size_t total_free_bytes: Total free bytes in the heap. Equivalent to multi_free_heap_size().

size_t total_allocated_bytes: Total bytes allocated to data in the heap.

size_t largest_free_block: Size of the largest free block in the heap. This is the largest malloc-able size.

size_t minimum_free_bytes: Lifetime minimum free heap size. Equivalent to multi_minimum_free_heap_size().

size_t allocated_blocks: Number of (variable size) blocks allocated in the heap.

size_t free_blocks: Number of (variable size) free blocks in the heap.

size_t total_blocks: Total number of (variable size) blocks in the heap.

Type Definitions

typedef struct multi_heap_info *multi_heap_handle_t: Opaque handle to a registered heap.

Provide feedback about this document

Heap Memory Allocation

Stack and Heap

Memory Capabilities

Available Heap

DRAM

IRAM

D/IRAM

Heap Sizes

Finding available heap

Special Capabilities

DMA-Capable Memory

32-Bit Accessible Memory

Thread Safety

Calling heap related functions from ISR

Heap Tracing & Debugging

Implementation Notes

API Reference - Heap Allocation

Header File

Functions

Macros

Type Definitions

API Reference - Initialisation

Header File

Functions

API Reference - Multi Heap API

Header File

Functions

Structures

Type Definitions