ESP-LyraT-8311A v1.3
This user guide provides information on the ESP-LyraT-8311A extension board.
This board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as main boards below.
Currently, ESP-LyraT-8311A v1.3 is sold as part of the ESP32-S2-Kaluga-1 Kit v1.3.
The ESP-LyraT-8311A extends the functionality of your main board by adding sound processing functionality:
Audio playback/recording
Processing of audio signals
Programmable buttons for easy control
This extension board can be used in many ways. The applications might include voice user interface, voice control, voice authorization, recording and playback of sound, etc.
The document consists of the following major sections:
Overview: Provides an overview and hardware setup instructions.
Hardware reference: Provides more detailed information about the ESP-LyraT-8311A's hardware.
Hardware Revision Details: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraT-8311A.
Related Documents: Gives links to related documentation.
Overview
The ESP-LyraT-8311A is mainly designed for audio applications. However, you can use your creativity to come up with any other use cases.
Description of Components
The description of components starts from the top right corner and then goes clockwise.
Reserved means that the functionality is available, but the current version of the kit does not use it.
Key Component |
Description |
---|---|
Extension Header |
Male Extension Header on the flip side is for mounting onto main board's Extension Header; Female Extension Header is for mounting other boards that have a Male Extension Header |
Function Button |
This board has six programmable buttons |
Microphone |
Supports Electret and MEMS microphones; this extension board is supplied with an electret microphone |
Headphone Connector |
6.3 mm (1/8") stereo headphone connector |
Speaker Connector |
Connect an external speaker to the 2-pin connector |
PA |
3 W Audio signal amplifier for the external speaker |
External Mic-Matrix Connector |
(Reserved) FPC connector for external Mic-Matrix (microphone boards) |
ADC |
(Reserved) high-performance ADC/ES7243: 1 channel for microphone, 1 channel for acoustic echo cancellation (AEC) function |
Mono Audio Codec |
ES8311 audio ADC and DAC; it can convert the analog signal picked up by the microphone or convert digital signal to play it back through a speaker or headphones |
Start Application Development
Before powering up your ESP-LyraT-8311A, please make sure that it is in good condition with no obvious signs of damage.
Required Hardware
Board with a female Extension Header (e.g., ESP32-S2-Kaluga-1)
ESP-LyraT-8311A extension board
Four mounting bolts (for stable mounting)
Computer running Windows, Linux, or macOS
Hardware Setup
To mount your ESP-LyraT-8311A onto the board with a female Extension Header:
Install the four mounting bolts onto the board with a female Extension Header
Align the ESP-LyraT-8311A with the bolts and Extension Header and insert it carefully
Software Setup
Depending on your application, see:
ESP-ADF Getting Started Guide if you develop with ESP-ADF (Espressif Audio Development Framework).
Section Software Setup of the ESP32-S2-Kaluga-1 kit user guide if you develop directly with ESP-IDF (Espressif IOT Development Framework).
Hardware Reference
Block Diagram
A block diagram below shows the components of ESP-LyraT-8311A and their interconnections.
Hardware Revision Details
ESP-LyraT-8311A v1.3
ADC/ES7243 and ADC/ES7210 removed as the Mono Audio Codec chip provides all the needed functionality.