温度传感器

[English]

简介

ESP32-P4 内置传感器，用于测量芯片内部的温度。该温度传感器模组包含一个 8 位 Sigma-Delta 模拟-数字转换器 (ADC) 和一个数字-模拟转换器 (DAC)，可以补偿测量结果，减少温度测量的误差。

由于硬件限制，温度传感器存在预定义的测量范围及其对应误差，详见下表：

预定义测量范围 (°C)	测量误差 (°C)
50 ~ 125	< 3
20 ~ 100	< 2
-10 ~ 80	< 1
-30 ~ 50	< 2
-40 ~ 20	< 3

备注

温度传感器主要用于测量芯片内部的温度变化。芯片内部温度通常高于环境温度，并且受到微控制器的时钟频率或 I/O 负载、外部散热环境等因素影响。

功能概述

下文将分节概述温度传感器的功能：

• 资源分配 - 介绍了部分参数，设置这些参数可以获取温度传感器句柄；还介绍了在温度传感器完成工作后如何回收资源。

• 启用及禁用温度传感器 - 介绍如何启用及禁用温度传感器。

• 获取测量的温度值 - 介绍如何获取实时温度值。

• 安装温度阈值回调函数 - 介绍如何注册温度阈值回调函数。

• 电源管理 - 介绍更改功耗模式（如 Light-sleep 模式）对温度传感器造成的影响。

• IRAM 安全 - 介绍在禁用 cache 时如何提高温度传感器的性能。

• 线程安全 - 介绍如何使驱动程序具备线程安全性。

• ETM 事件和任务 - 介绍哪些事件和任务可以连接到 ETM 通道。

资源分配

ESP32-P4 只有一个内置温度传感器硬件。temperature_sensor_handle_t 表示温度传感器模块，该变量也是不同函数之间的纽带。通过使用相同的 temperature_sensor_handle_t 变量，可以在不同的函数调用中访问和修改温度传感器属性，以控制和管理温度传感器。该变量会作为温度 API 的参数，携带有关硬件和配置的信息，你只需创建类型为 temperature_sensor_handle_t 的指针，并将其传递给所需 API。

请在安装内置温度传感器模块前评估测量环境的温度范围。例如，如果在室内测量，环境温度可能在 10 °C ~ 30 °C；如果在灯泡中测量，环境温度则可能在 60 °C ~ 110 °C。在环境温度范围的基础上，请先根据以下值定义配置结构体 temperature_sensor_config_t，再安装内置温度传感器：

• range_min：所测量温度范围的最小值。

• range_max：所测量温度范围的最大值。

设置好温度范围后，将配置结构体传递给 temperature_sensor_install()，该函数将创建温度传感器模块并返回句柄。

如前文所述，不同测量范围对应不同测量误差。然而你无需自行比对测量误差，乐鑫提供了一个内部机制，可以根据所给温度范围选择最小误差。

温度传感器使用完毕后，请调用 temperature_sensor_uninstall() 释放相应资源。

创建温度传感器句柄

• 第 1 步：评估测量范围。本示例的温度范围为 20 °C ~ 50 °C。

• 第 2 步：配置测量范围，获取温度传感器句柄。

temperature_sensor_handle_t temp_handle = NULL;
temperature_sensor_config_t temp_sensor_config = TEMPERATURE_SENSOR_CONFIG_DEFAULT(20, 50);
ESP_ERROR_CHECK(temperature_sensor_install(&temp_sensor_config, &temp_handle));

启用及禁用温度传感器

1. 调用 temperature_sensor_enable() 启用温度传感器。此时，内部温度传感器回路开始工作，驱动程序从初始化状态转为启用状态。

2. 调用 temperature_sensor_disable() 禁用温度传感器。

获取测量的温度值

通过 temperature_sensor_enable() 启用温度传感器后，可以调用 temperature_sensor_get_celsius() 获取当前测量的温度值。

// 启用温度传感器
ESP_ERROR_CHECK(temperature_sensor_enable(temp_handle));
// 获取传输的传感器数据
float tsens_out;
ESP_ERROR_CHECK(temperature_sensor_get_celsius(temp_handle, &tsens_out));
printf("Temperature in %f °C\n", tsens_out);
// 温度传感器使用完毕后，禁用温度传感器，节约功耗
ESP_ERROR_CHECK(temperature_sensor_disable(temp_handle));

安装温度阈值回调函数

ESP32-P4 支持自动触发温度传感器，持续监测内部温度，内部温度达到给定阈值时将触发中断。因此，可以安装中断回调函数执行所需操作，如报警、重启等。下文介绍了如何准备阈值回调函数。

• 函数 temperature_sensor_event_callbacks_t::on_threshold 在中断服务程序 (ISR) 的上下文中调用，请确保该函数不会涉及 block 操作。为此，可以检查调用 API 的后缀，确保仅从函数内调用具有 ISR 后缀的 FreeRTOS API 等。函数原型在 temperature_thres_cb_t 中声明。

通过参数 user_arg 可以将自定义上下文保存到 temperature_sensor_register_callbacks() 中，用户数据将直接传递给回调函数。

IRAM_ATTR static bool temp_sensor_monitor_cbs(temperature_sensor_handle_t tsens, const temperature_sensor_threshold_event_data_t *edata, void *user_data)
{
    ESP_DRAM_LOGI("tsens", "Temperature value is higher or lower than threshold, value is %d\n...\n\n", edata->celsius_value);
    return false;
}

// 配置回调函数
temperature_sensor_abs_threshold_config_t threshold_cfg = {
    .high_threshold = 50,
    .low_threshold = -10,
};
// 设置监控阈值
temperature_sensor_set_absolute_threshold(temp_sensor, &threshold_cfg);
// 注册中断回调函数
temperature_sensor_event_callbacks_t cbs = {
    .on_threshold = temp_sensor_monitor_cbs,
};
// 安装温度回调函数
temperature_sensor_register_callbacks(temp_sensor, &cbs, NULL);

电源管理

由于温度传感器不使用 APB 时钟，无论是否激活 CONFIG_PM_ENABLE 启用电源管理，温度传感器仍可以继续工作。

IRAM 安全

默认情况下，禁用 cache 时，写入/擦除 flash 等原因将导致温度传感器中断延迟，事件回调函数也将延迟执行。在实时应用程序中，应避免此类情况。

因此，可以启用 Kconfig 选项 CONFIG_TEMP_SENSOR_ISR_IRAM_SAFE，该选项：

1. 支持在禁用 cache 时启用所需中断

2. 支持将 ISR 使用的所有函数存放在 IRAM 中

启用该选项可以保证 cache 禁用时的中断运行，但会占用更多的 IRAM。

线程安全

温度传感器中并未添加任何确保线程安全的额外保护，因为温度传感器通常只在一个任务中调用。如果要在不同任务中使用该驱动程序，请设置额外的锁进行保护。

ETM 事件和任务

温度传感器能够生成事件，这些事件可以与 :doc:ETM </api-reference/peripherals/etm> 模块进行交互。:cpp:type:temperature_sensor_etm_event_type_t 中列出了所有支持的事件。可以调用 :cpp:func:temperature_sensor_new_etm_event 来获取相应的 ETM 事件句柄。:cpp:type:temperature_sensor_etm_task_type_t 中列出了所有支持的任务。可以调用 :cpp:func:temperature_sensor_new_etm_task 来获取相应的 ETM 任务句柄。

备注

• 对于 temperature_sensor_etm_event_type_t::event_type 的 TEMPERATURE_SENSOR_EVENT_OVER_LIMIT 取决于首先设置的阈值类型。如果是通过 temperature_sensor_set_absolute_threshold() 设置了绝对阈值，那么 TEMPERATURE_SENSOR_EVENT_OVER_LIMIT 将指代绝对阈值。同样，如果是通过 temperature_sensor_set_delta_threshold() 设置了增量阈值，那么 TEMPERATURE_SENSOR_EVENT_OVER_LIMIT 将指代增量阈值。

有关如何将事件和任务连接到 ETM 通道的详细信息，请参阅 :doc:ETM </api-reference/peripherals/etm> 文档。

意外情况

1. 从芯片获取的温度值通常与环境温度不同，因为温度传感器内置于芯片，从某种程度来说，温度传感器测量的是芯片内的温度。

2. 安装温度传感器失败时，如果驱动程序打印的错误信息为 the boundary you gave cannot meet the range of internal temperature sensor，说明内置温度传感器温度测量范围的限制影响了安装过程，该错误通常由以下几种不正确的 temperature_sensor_config_t 配置造成：

   1. 超出温度测量范围，如 200 °C ~ 300 °C。

   2. 超过了预定义测量范围的界限，如 40 °C ~ 110 °C。

应用示例

• 读取温度传感器测量值：peripherals/temperature_sensor/temp_sensor。

• 监测温度传感器测量值：peripherals/temperature_sensor/temp_sensor_monitor。

API 参考

Header File

• components/esp_driver_tsens/include/driver/temperature_sensor.h

• This header file can be included with:

  #include "driver/temperature_sensor.h"
  

• This header file is a part of the API provided by the esp_driver_tsens component. To declare that your component depends on esp_driver_tsens, add the following to your CMakeLists.txt:

  REQUIRES esp_driver_tsens
  

  or

  PRIV_REQUIRES esp_driver_tsens
  

Functions

esp_err_t temperature_sensor_install(const temperature_sensor_config_t *tsens_config, temperature_sensor_handle_t *ret_tsens)

Install temperature sensor driver.

参数

• tsens_config -- Pointer to config structure.

• ret_tsens -- Return the pointer of temperature sensor handle.

返回

• ESP_OK if succeed

esp_err_t temperature_sensor_uninstall(temperature_sensor_handle_t tsens)

Uninstall the temperature sensor driver.

参数

tsens -- The handle created by temperature_sensor_install().

返回

• ESP_OK if succeed.

esp_err_t temperature_sensor_enable(temperature_sensor_handle_t tsens)

Enable the temperature sensor.

参数

tsens -- The handle created by temperature_sensor_install().

返回

• ESP_OK Success

• ESP_ERR_INVALID_STATE if temperature sensor is enabled already.

esp_err_t temperature_sensor_disable(temperature_sensor_handle_t tsens)

Disable temperature sensor.

参数

tsens -- The handle created by temperature_sensor_install().

返回

• ESP_OK Success

• ESP_ERR_INVALID_STATE if temperature sensor is not enabled yet.

esp_err_t temperature_sensor_get_celsius(temperature_sensor_handle_t tsens, float *out_celsius)

Read temperature sensor data that is converted to degrees Celsius.

备注

Should not be called from interrupt.

参数

• tsens -- The handle created by temperature_sensor_install().

• out_celsius -- The measure output value.

返回

• ESP_OK Success

• ESP_ERR_INVALID_ARG invalid arguments

• ESP_ERR_INVALID_STATE Temperature sensor is not enabled yet.

• ESP_FAIL Parse the sensor data into ambient temperature failed (e.g. out of the range).

esp_err_t temperature_sensor_set_absolute_threshold(temperature_sensor_handle_t tsens, const temperature_sensor_abs_threshold_config_t *abs_cfg)

Set temperature sensor absolute mode automatic monitor.

备注

This function should not be called with temperature_sensor_set_delta_threshold.

参数

• tsens -- The handle created by temperature_sensor_install().

• abs_cfg -- Configuration of temperature sensor absolute mode interrupt, see temperature_sensor_abs_threshold_config_t.

返回

• ESP_OK: Set absolute threshold successfully.

• ESP_ERR_INVALID_STATE: Set absolute threshold failed because of wrong state.

• ESP_ERR_INVALID_ARG: Set absolute threshold failed because of invalid argument.

esp_err_t temperature_sensor_set_delta_threshold(temperature_sensor_handle_t tsens, const temperature_sensor_delta_threshold_config_t *delta_cfg)

Set temperature sensor differential mode automatic monitor.

备注

This function should not be called with temperature_sensor_set_absolute_threshold

参数

• tsens -- The handle created by temperature_sensor_install().

• delta_cfg -- Configuration of temperature sensor delta mode interrupt, see temperature_sensor_delta_threshold_config_t.

返回

• ESP_OK: Set differential value threshold successfully.

• ESP_ERR_INVALID_STATE: Set absolute threshold failed because of wrong state.

• ESP_ERR_INVALID_ARG: Set differential value threshold failed because of invalid argument.

esp_err_t temperature_sensor_register_callbacks(temperature_sensor_handle_t tsens, const temperature_sensor_event_callbacks_t *cbs, void *user_arg)

Install temperature sensor interrupt callback. Temperature sensor interrupt will be enabled at same time.

参数

• tsens -- The handle created by temperature_sensor_install().

• cbs -- Pointer to the group of temperature sensor interrupt callbacks.

• user_arg -- Callback argument.

返回

• ESP_OK: Set event callbacks successfully

• ESP_ERR_INVALID_ARG: Set event callbacks failed because of invalid argument

• ESP_FAIL: Set event callbacks failed because of other error

Structures

struct temperature_sensor_config_t

Configuration of measurement range for the temperature sensor.

备注

If you see the log the boundary you gave cannot meet the range of internal temperature sensor. You may need to refer to predefined range listed doc api-reference/peripherals/Temperature sensor.

Public Members

int range_min

the minimum value of the temperature you want to test

int range_max

the maximum value of the temperature you want to test

temperature_sensor_clk_src_t clk_src

the clock source of the temperature sensor.

struct temperature_sensor_threshold_event_data_t

Temperature sensor event data.

Public Members

int celsius_value

Celsius value in interrupt callback.

temperature_val_intr_condition_t intr_condition

Can be used to judge temperature sensor interrupts in which reason

struct temperature_sensor_event_callbacks_t

Group of temperature sensor callback functions, all of them will be run in ISR.

Public Members

temperature_thres_cb_t on_threshold

Temperature value interrupt callback

struct temperature_sensor_abs_threshold_config_t

Config options for temperature value absolute interrupt.

Public Members

float high_threshold

High threshold value(Celsius). Interrupt will be triggered if temperature value is higher than this value

float low_threshold

Low threshold value(Celsius). Interrupt will be triggered if temperature value is lower than this value

struct temperature_sensor_delta_threshold_config_t

Config options for temperature value delta interrupt.

Public Members

float increase_delta

Interrupt will be triggered if the temperature increment of two consecutive samplings if larger than increase_delta

float decrease_delta

Interrupt will be triggered if the temperature decrement of two consecutive samplings if smaller than decrease_delta

Macros

TEMPERATURE_SENSOR_CONFIG_DEFAULT(min, max)

temperature_sensor_config_t default constructor

Type Definitions

typedef struct temperature_sensor_obj_t *temperature_sensor_handle_t

Type of temperature sensor driver handle.

typedef bool (*temperature_thres_cb_t)(temperature_sensor_handle_t tsens, const temperature_sensor_threshold_event_data_t *edata, void *user_data)

Callback for temperature sensor threshold interrupt.

Param tsens

[in] The handle created by temperature_sensor_install().

Param edata

[in] temperature sensor event data, fed by driver.

Param user_data

[in] User data, set in temperature_sensor_register_callbacks().

Return

Whether a high priority task has been waken up by this function.

Enumerations

enum temperature_val_intr_condition_t

Enum for temperature sensor interrupt condition.

Values:

enumerator TEMPERATURE_VAL_HIGHER_THAN_HIGH_THRESHOLD

temperature sensor value is higher than high threshold

enumerator TEMPERATURE_VAL_LOWER_THAN_LOW_THRESHOLD

temperature sensor value is lower than low threshold

Header File

• components/hal/include/hal/temperature_sensor_types.h

• This header file can be included with:

  #include "hal/temperature_sensor_types.h"
  

Type Definitions

typedef soc_periph_temperature_sensor_clk_src_t temperature_sensor_clk_src_t

temperature sensor clock source

Enumerations

enum temperature_sensor_etm_event_type_t

temperature sensor event types enum

Values:

enumerator TEMPERATURE_SENSOR_EVENT_OVER_LIMIT

Temperature sensor over limit event

enumerator TEMPERATURE_SENSOR_EVENT_MAX

Maximum number of temperature sensor events

enum temperature_sensor_etm_task_type_t

temperature sensor task types enum

Values:

enumerator TEMPERATURE_SENSOR_TASK_START

Temperature sensor start task

enumerator TEMPERATURE_SENSOR_TASK_STOP

Temperature sensor stop task

enumerator TEMPERATURE_SENSOR_TASK_MAX

Maximum number of temperature sensor tasks

Header File

• components/esp_driver_tsens/include/driver/temperature_sensor_etm.h

• This header file can be included with:

  #include "driver/temperature_sensor_etm.h"
  

• This header file is a part of the API provided by the esp_driver_tsens component. To declare that your component depends on esp_driver_tsens, add the following to your CMakeLists.txt:

  REQUIRES esp_driver_tsens
  

  or

  PRIV_REQUIRES esp_driver_tsens
  

Functions

esp_err_t temperature_sensor_new_etm_event(temperature_sensor_handle_t tsens, const temperature_sensor_etm_event_config_t *config, esp_etm_event_handle_t *out_event)

Get the ETM event for Temperature Sensor.

备注

The created ETM event object can be deleted later by calling esp_etm_del_event

参数

• tsens -- [in] Temperature Sensor handle, allocated by temperature_sensor_install()

• config -- [in] Temperature Sensor ETM event configuration

• out_event -- [out] Returned ETM event handle

返回

• ESP_OK: Get ETM event successfully

• ESP_ERR_INVALID_ARG: Get ETM event failed because of invalid argument

• ESP_FAIL: Get ETM event failed because of other error

esp_err_t temperature_sensor_new_etm_task(temperature_sensor_handle_t tsens, const temperature_sensor_etm_task_config_t *config, esp_etm_task_handle_t *out_task)

Get the ETM task for Temperature Sensor.

备注

The created ETM task object can be deleted later by calling esp_etm_del_task

参数

• tsens -- [in] Temperature Sensor, allocated by temperature_sensor_install()

• config -- [in] Temperature Sensor ETM task configuration

• out_task -- [out] Returned ETM task handle

返回

• ESP_OK: Get ETM task successfully

• ESP_ERR_INVALID_ARG: Get ETM task failed because of invalid argument

• ESP_FAIL: Get ETM task failed because of other error

Structures

struct temperature_sensor_etm_event_config_t

Temperature Sensor ETM event configuration.

Public Members

temperature_sensor_etm_event_type_t event_type

Temperature Sensor ETM event type

struct temperature_sensor_etm_task_config_t

Temperature Sensor ETM task configuration.

Public Members

temperature_sensor_etm_task_type_t task_type

Temperature Sensor ETM task type

提供有关此文档的反馈