Classic Bluetooth® L2CAP API

Application Examples

API Reference

Header File

  • components/bt/host/bluedroid/api/include/api/esp_l2cap_bt_api.h

  • This header file can be included with:

    #include "esp_l2cap_bt_api.h"

  • This header file is a part of the API provided by the bt component. To declare that your component depends on bt, add the following to your CMakeLists.txt:

    REQUIRES bt

    or

    PRIV_REQUIRES bt

Functions

esp_err_t esp_bt_l2cap_register_callback(esp_bt_l2cap_cb_t callback)

This function is called to init callbacks with L2CAP module.

参数:

callback -- [in] pointer to the init callback function.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_init(void)

This function is called to init L2CAP module. When the operation is completed, the callback function will be called with ESP_BT_L2CAP_INIT_EVT. This function should be called after esp_bluedroid_enable() completes successfully.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_deinit(void)

This function is called to uninit l2cap module. The operation will close all active L2CAP connection first, then the callback function will be called with ESP_BT_L2CAP_CLOSE_EVT, and the number of ESP_BT_L2CAP_CLOSE_EVT is equal to the number of connection. When the operation is completed, the callback function will be called with ESP_BT_L2CAP_UNINIT_EVT. This function should be called after esp_bt_l2cap_init() completes successfully.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_connect(esp_bt_l2cap_cntl_flags_t cntl_flag, uint16_t remote_psm, esp_bd_addr_t peer_bd_addr)

This function makes an L2CAP connection to a remote BD Address. When the connection is initiated or failed to initiate, the callback is called with ESP_BT_L2CAP_CL_INIT_EVT. When the connection is established or failed, the callback is called with ESP_BT_L2CAP_OPEN_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

参数:

  • cntl_flag -- [in] Lower 16-bit security settings mask.

  • remote_psm -- [in] Remote device bluetooth Profile PSM.

  • peer_bd_addr -- [in] Remote device bluetooth device address.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_start_srv(esp_bt_l2cap_cntl_flags_t cntl_flag, uint16_t local_psm)

This function create a L2CAP server and starts listening for an L2CAP connection request from a remote Bluetooth device. When the server is started successfully, the callback is called with ESP_BT_L2CAP_START_EVT. When the connection is established, the callback is called with ESP_BT_L2CAP_OPEN_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

参数:

  • cntl_flag -- [in] Lower 16-bit security settings mask.

  • local_psm -- [in] Dynamic PSM.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_stop_all_srv(void)

This function stops all L2CAP servers. The operation will close all active L2CAP connection first, then the callback function will be called with ESP_BT_L2CAP_CLOSE_EVT, and the number of ESP_BT_L2CAP_CLOSE_EVT is equal to the number of connection. When the operation is completed, the callback is called with ESP_BT_L2CAP_SRV_STOP_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_stop_srv(uint16_t local_psm)

This function stops a specific L2CAP server. The operation will close all active L2CAP connection first on the specific L2CAP server, then the callback function will be called with ESP_BT_L2CAP_CLOSE_EVT, and the number of ESP_BT_L2CAP_CLOSE_EVT is equal to the number of connection. When the operation is completed, the callback is called with ESP_BT_L2CAP_SRV_STOP_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

参数:

local_psm -- [in] Dynamic PSM.

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_vfs_register(void)

This function is used to register VFS. Only supports write, read and close. When the operation is completed, the callback function will be called with ESP_BT_L2CAP_VFS_REGISTER_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_vfs_unregister(void)

This function is used to unregister VFS. When the operation is completed, the callback function will be called with ESP_BT_L2CAP_VFS_UNREGISTER_EVT. This function must be called after esp_bt_l2cap_init() successful and before esp_bt_l2cap_deinit().

返回:

  • ESP_OK: success

  • other: failed

esp_err_t esp_bt_l2cap_get_protocol_status(esp_bt_l2cap_protocol_status_t *status)

This function is used to get the status of L2CAP.

参数:

status -- [out] - l2cap status

返回:

  • ESP_OK: success

  • other: failed

Unions

union esp_bt_l2cap_cb_param_t
#include <esp_l2cap_bt_api.h>

L2CAP callback parameters union.

Public Members

struct esp_bt_l2cap_cb_param_t::l2cap_init_evt_param init

L2CAP callback param of ESP_BT_L2CAP_INIT_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_uninit_evt_param uninit

L2CAP callback param of ESP_BT_L2CAP_UNINIT_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_open_evt_param open

L2CAP callback param of ESP_BT_L2CAP_OPEN_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_close_evt_param close

L2CAP callback param of ESP_BT_L2CAP_CLOSE_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_start_evt_param start

L2CAP callback param of ESP_BT_L2CAP_START_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_cl_init_evt_param cl_init

L2CAP callback param of ESP_BT_L2CAP_CL_INIT_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_srv_stop_evt_param srv_stop

L2CAP callback param of ESP_BT_L2CAP_SRV_STOP_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_vfs_register_evt_param vfs_register

L2CAP callback param of ESP_BT_L2CAP_VFS_REGISTER_EVT

struct esp_bt_l2cap_cb_param_t::l2cap_vfs_unregister_evt_param vfs_unregister

L2CAP callback param of ESP_BT_L2CAP_VFS_UNREGISTER_EVT

struct l2cap_cl_init_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_CL_INIT_EVT.

Public Members

esp_bt_l2cap_status_t status

status

uint32_t handle

The connection handle

uint8_t sec_id

security ID used by this server

struct l2cap_close_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_CLOSE_EVT.

Public Members

esp_bt_l2cap_status_t status

status

uint32_t handle

The connection handle

bool async

FALSE, if local initiates disconnect

struct l2cap_init_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_INIT_EVT.

Public Members

esp_bt_l2cap_status_t status

status

struct l2cap_open_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_OPEN_EVT.

Public Members

esp_bt_l2cap_status_t status

status

uint32_t handle

The connection handle

int fd

File descriptor

esp_bd_addr_t rem_bda

The peer address

int32_t tx_mtu

The transmit MTU

struct l2cap_srv_stop_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_SRV_STOP_EVT.

Public Members

esp_bt_l2cap_status_t status

status

uint16_t psm

local psm

struct l2cap_start_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_START_EVT.

Public Members

esp_bt_l2cap_status_t status

status

uint32_t handle

The connection handle

uint8_t sec_id

security ID used by this server

struct l2cap_uninit_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_UNINIT_EVT.

Public Members

esp_bt_l2cap_status_t status

status

struct l2cap_vfs_register_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_VFS_REGISTER_EVT.

Public Members

esp_bt_l2cap_status_t status

status

struct l2cap_vfs_unregister_evt_param
#include <esp_l2cap_bt_api.h>

ESP_BT_L2CAP_VFS_UNREGISTER_EVT.

Public Members

esp_bt_l2cap_status_t status

status

Structures

struct esp_bt_l2cap_protocol_status_t

L2CAP status parameters.

Public Members

bool l2cap_inited

l2cap initialization

uint8_t conn_num

Number of connections

Macros

ESP_BT_L2CAP_SEC_NONE

Security Setting Mask. Use these three mask mode:

  1. ESP_BT_L2CAP_SEC_NONE

  2. ESP_BT_L2CAP_SEC_AUTHENTICATE

  3. (ESP_BT_L2CAP_SEC_ENCRYPT|ESP_BT_L2CAP_SEC_AUTHENTICATE) No security

ESP_BT_L2CAP_SEC_AUTHORIZE

Authorization required

ESP_BT_L2CAP_SEC_AUTHENTICATE

Authentication required

ESP_BT_L2CAP_SEC_ENCRYPT

Encryption required

Type Definitions

typedef uint32_t esp_bt_l2cap_cntl_flags_t
typedef void (*esp_bt_l2cap_cb_t)(esp_bt_l2cap_cb_event_t event, esp_bt_l2cap_cb_param_t *param)

L2CAP callback function type.

Param event:

Event type

Param param:

Point to callback parameter, currently is union type

Enumerations

enum esp_bt_l2cap_status_t

L2CAP operation success and failure codes.

Values:

enumerator ESP_BT_L2CAP_SUCCESS

Successful operation.

enumerator ESP_BT_L2CAP_FAILURE

Generic failure.

enumerator ESP_BT_L2CAP_BUSY

Temporarily can not handle this request.

enumerator ESP_BT_L2CAP_NO_RESOURCE

No more resource

enumerator ESP_BT_L2CAP_NEED_INIT

L2CAP module shall init first

enumerator ESP_BT_L2CAP_NEED_DEINIT

L2CAP module shall deinit first

enumerator ESP_BT_L2CAP_NO_CONNECTION

Connection may have been closed

enumerator ESP_BT_L2CAP_NO_SERVER

No server

enum esp_bt_l2cap_cb_event_t

L2CAP callback function events.

Values:

enumerator ESP_BT_L2CAP_INIT_EVT

When L2CAP is initialized, the event comes

enumerator ESP_BT_L2CAP_UNINIT_EVT

When L2CAP is deinitialized, the event comes

enumerator ESP_BT_L2CAP_OPEN_EVT

When L2CAP Client connection open, the event comes

enumerator ESP_BT_L2CAP_CLOSE_EVT

When L2CAP connection closed, the event comes

enumerator ESP_BT_L2CAP_START_EVT

When L2CAP server started, the event comes

enumerator ESP_BT_L2CAP_CL_INIT_EVT

When L2CAP client initiated a connection, the event comes

enumerator ESP_BT_L2CAP_SRV_STOP_EVT

When L2CAP server stopped, the event comes

enumerator ESP_BT_L2CAP_VFS_REGISTER_EVT

When L2CAP VFS register, the event comes

enumerator ESP_BT_L2CAP_VFS_UNREGISTER_EVT

When L2CAP VFS unregister, the event comes

此文档对您有帮助吗？