CLASSIC BLUETOOTH GAP API

API Reference

Header File

components/bt/host/bluedroid/api/include/api/esp_gap_bt_api.h

Functions

static inline uint32_t esp_bt_gap_get_cod_srvc(uint32_t cod)

get major service field of COD

参数: cod – [in] Class of Device
返回: major service bits

static inline uint32_t esp_bt_gap_get_cod_major_dev(uint32_t cod)

get major device field of COD

参数: cod – [in] Class of Device
返回: major device bits

static inline uint32_t esp_bt_gap_get_cod_minor_dev(uint32_t cod)

get minor service field of COD

参数: cod – [in] Class of Device
返回: minor service bits

static inline uint32_t esp_bt_gap_get_cod_format_type(uint32_t cod)

get format type of COD

参数: cod – [in] Class of Device
返回: format type

static inline bool esp_bt_gap_is_valid_cod(uint32_t cod)

decide the integrity of COD

参数

cod – [in] Class of Device

返回

true if cod is valid
false otherise

esp_err_t esp_bt_gap_register_callback(esp_bt_gap_cb_t callback)

register callback function. This function should be called after esp_bluedroid_enable() completes successfully

返回

ESP_OK : Succeed
ESP_FAIL: others

esp_err_t esp_bt_gap_set_scan_mode(esp_bt_connection_mode_t c_mode, esp_bt_discovery_mode_t d_mode)

Set discoverability and connectability mode for legacy bluetooth. This function should be called after esp_bluedroid_enable() completes successfully.

参数

c_mode – [in] : one of the enums of esp_bt_connection_mode_t
d_mode – [in] : one of the enums of esp_bt_discovery_mode_t

返回

ESP_OK : Succeed
ESP_ERR_INVALID_ARG: if argument invalid
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_bt_gap_start_discovery(esp_bt_inq_mode_t mode, uint8_t inq_len, uint8_t num_rsps)

This function starts Inquiry and Name Discovery. This function should be called after esp_bluedroid_enable() completes successfully. When Inquiry is halted and cached results do not contain device name, then Name Discovery will connect to the peer target to get the device name. esp_bt_gap_cb_t will be called with ESP_BT_GAP_DISC_STATE_CHANGED_EVT when Inquriry is started or Name Discovery is completed. esp_bt_gap_cb_t will be called with ESP_BT_GAP_DISC_RES_EVT each time the two types of discovery results are got.

参数

mode – [in] - Inquiry mode
inq_len – [in] - Inquiry duration in 1.28 sec units, ranging from 0x01 to 0x30. This parameter only specifies the total duration of the Inquiry process,
- when this time expires, Inquiry will be halted.
num_rsps – [in] - Number of responses that can be received before the Inquiry is halted, value 0 indicates an unlimited number of responses.

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_ERR_INVALID_ARG: if invalid parameters are provided
ESP_FAIL: others

esp_err_t esp_bt_gap_cancel_discovery(void)

Cancel Inquiry and Name Discovery. This function should be called after esp_bluedroid_enable() completes successfully. esp_bt_gap_cb_t will be called with ESP_BT_GAP_DISC_STATE_CHANGED_EVT if Inquiry or Name Discovery is cancelled by calling this function.

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_bt_gap_get_remote_services(esp_bd_addr_t remote_bda)

Start SDP to get remote services. This function should be called after esp_bluedroid_enable() completes successfully. esp_bt_gap_cb_t will be called with ESP_BT_GAP_RMT_SRVCS_EVT after service discovery ends.

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_bt_gap_get_remote_service_record(esp_bd_addr_t remote_bda, esp_bt_uuid_t *uuid)

Start SDP to look up the service matching uuid on the remote device. This function should be called after esp_bluedroid_enable() completes successfully.

esp_bt_gap_cb_t will be called with ESP_BT_GAP_RMT_SRVC_REC_EVT after service discovery ends

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

uint8_t *esp_bt_gap_resolve_eir_data(uint8_t *eir, esp_bt_eir_type_t type, uint8_t *length)

This function is called to get EIR data for a specific type.

参数

eir – [in] - pointer of raw eir data to be resolved
type – [in] - specific EIR data type
length – [out] - return the length of EIR data excluding fields of length and data type

返回

pointer of starting position of eir data excluding eir data type, NULL if not found

esp_err_t esp_bt_gap_config_eir_data(esp_bt_eir_data_t *eir_data)

This function is called to config EIR data.

esp_bt_gap_cb_t will be called with ESP_BT_GAP_CONFIG_EIR_DATA_EVT after config EIR ends.

参数

eir_data – [in] - pointer of EIR data content

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_ERR_INVALID_ARG: if param is invalid
ESP_FAIL: others

esp_err_t esp_bt_gap_set_cod(esp_bt_cod_t cod, esp_bt_cod_mode_t mode)

This function is called to set class of device. The structure esp_bt_gap_cb_t will be called with ESP_BT_GAP_SET_COD_EVT after set COD ends. Some profile have special restrictions on class of device, changes may cause these profile do not work.

参数

cod – [in] - class of device
mode – [in] - setting mode

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_ERR_INVALID_ARG: if param is invalid
ESP_FAIL: others

esp_err_t esp_bt_gap_get_cod(esp_bt_cod_t *cod)

This function is called to get class of device.

参数

cod – [out] - class of device

返回

ESP_OK : Succeed
ESP_FAIL: others

esp_err_t esp_bt_gap_read_rssi_delta(esp_bd_addr_t remote_addr)

This function is called to read RSSI delta by address after connected. The RSSI value returned by ESP_BT_GAP_READ_RSSI_DELTA_EVT.

参数

remote_addr – [in] - remote device address, corresponding to a certain connection handle

返回

ESP_OK : Succeed
ESP_FAIL: others

esp_err_t esp_bt_gap_remove_bond_device(esp_bd_addr_t bd_addr)

Removes a device from the security database list of peer device.

参数

bd_addr – [in] : BD address of the peer device

返回

- ESP_OK : success

ESP_FAIL : failed

int esp_bt_gap_get_bond_device_num(void)

Get the device number from the security database list of peer device. It will return the device bonded number immediately.

返回

- >= 0 : bonded devices number

ESP_FAIL : failed

esp_err_t esp_bt_gap_get_bond_device_list(int *dev_num, esp_bd_addr_t *dev_list)

Get the device from the security database list of peer device. It will return the device bonded information immediately.

参数

dev_num – [inout] Indicate the dev_list array(buffer) size as input. If dev_num is large enough, it means the actual number as output. Suggest that dev_num value equal to esp_ble_get_bond_device_num().
dev_list – [out] an array(buffer) of esp_bd_addr_t type. Use for storing the bonded devices address. The dev_list should be allocated by who call this API.

返回

ESP_OK : Succeed
ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_bt_gap_set_pin(esp_bt_pin_type_t pin_type, uint8_t pin_code_len, esp_bt_pin_code_t pin_code)

Set pin type and default pin code for legacy pairing.

参数

pin_type – [in] Use variable or fixed pin. If pin_type is ESP_BT_PIN_TYPE_VARIABLE, pin_code and pin_code_len will be ignored, and ESP_BT_GAP_PIN_REQ_EVT will come when control requests for pin code. Else, will use fixed pin code and not callback to users.
pin_code_len – [in] Length of pin_code
pin_code – [in] Pin_code

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_pin_reply(esp_bd_addr_t bd_addr, bool accept, uint8_t pin_code_len, esp_bt_pin_code_t pin_code)

Reply the pin_code to the peer device for legacy pairing when ESP_BT_GAP_PIN_REQ_EVT is coming.

参数

bd_addr – [in] BD address of the peer
accept – [in] Pin_code reply successful or declined.
pin_code_len – [in] Length of pin_code
pin_code – [in] Pin_code

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_set_security_param(esp_bt_sp_param_t param_type, void *value, uint8_t len)

Set a GAP security parameter value. Overrides the default value.

参数

param_type – [in] : the type of the param which is to be set
value – [in] : the param value
len – [in] : the length of the param value

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_ssp_passkey_reply(esp_bd_addr_t bd_addr, bool accept, uint32_t passkey)

Reply the key value to the peer device in the legacy connection stage.

参数

bd_addr – [in] : BD address of the peer
accept – [in] : passkey entry successful or declined.
passkey – [in] : passkey value, must be a 6 digit number, can be lead by 0.

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_ssp_confirm_reply(esp_bd_addr_t bd_addr, bool accept)

Reply the confirm value to the peer device in the legacy connection stage.

参数

bd_addr – [in] : BD address of the peer device
accept – [in] : numbers to compare are the same or different

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_set_afh_channels(esp_bt_gap_afh_channels channels)

Set the AFH channels.

参数

channels – [in] : The n th such field (in the range 0 to 78) contains the value for channel n : 0 means channel n is bad. 1 means channel n is unknown. The most significant bit is reserved and shall be set to 0. At least 20 channels shall be marked as unknown.

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_read_remote_name(esp_bd_addr_t remote_bda)

Read the remote device name.

参数

remote_bda – [in] The remote device’s address

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

esp_err_t esp_bt_gap_set_qos(esp_bd_addr_t remote_bda, uint32_t t_poll)

Config Quality of service.

参数

remote_bda – [in] The remote device’s address
t_poll – [in] Poll interval, the maximum time between transmissions which from the master to a particular slave on the ACL logical transport. unit is 0.625ms

返回

- ESP_OK : success

ESP_ERR_INVALID_STATE: if bluetooth stack is not yet enabled
other : failed

Unions

union esp_bt_gap_cb_param_t

#include <esp_gap_bt_api.h>

GAP state callback parameters.

Public Members

struct esp_bt_gap_cb_param_t::disc_res_param disc_res: discovery result parameter struct

struct esp_bt_gap_cb_param_t::disc_state_changed_param disc_st_chg: discovery state changed parameter struct

struct esp_bt_gap_cb_param_t::rmt_srvcs_param rmt_srvcs: services of remote device parameter struct

struct esp_bt_gap_cb_param_t::rmt_srvc_rec_param rmt_srvc_rec: specific service record from remote device parameter struct

struct esp_bt_gap_cb_param_t::read_rssi_delta_param read_rssi_delta: read rssi parameter struct

struct esp_bt_gap_cb_param_t::config_eir_data_param config_eir_data: config EIR data

struct esp_bt_gap_cb_param_t::auth_cmpl_param auth_cmpl: authentication complete parameter struct

struct esp_bt_gap_cb_param_t::pin_req_param pin_req: pin request parameter struct

struct esp_bt_gap_cb_param_t::cfm_req_param cfm_req: confirm request parameter struct

struct esp_bt_gap_cb_param_t::key_notif_param key_notif: passkey notif parameter struct

struct esp_bt_gap_cb_param_t::key_req_param key_req: passkey request parameter struct

struct esp_bt_gap_cb_param_t::set_afh_channels_param set_afh_channels: set AFH channel parameter struct

struct esp_bt_gap_cb_param_t::read_rmt_name_param read_rmt_name: read Remote Name parameter struct

struct esp_bt_gap_cb_param_t::mode_chg_param mode_chg: mode change event parameter struct

struct esp_bt_gap_cb_param_t::bt_remove_bond_dev_cmpl_evt_param remove_bond_dev_cmpl: Event parameter of ESP_BT_GAP_REMOVE_BOND_DEV_COMPLETE_EVT

struct esp_bt_gap_cb_param_t::qos_cmpl_param qos_cmpl: QoS complete parameter struct

struct auth_cmpl_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_AUTH_CMPL_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_status_t stat: authentication complete status

uint8_t device_name[(248) + 1]: device name

struct bt_remove_bond_dev_cmpl_evt_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_REMOVE_BOND_DEV_COMPLETE_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_status_t status: Indicate the remove bond device operation success status

struct cfm_req_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_CFM_REQ_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

uint32_t num_val: the numeric value for comparison.

struct config_eir_data_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_CONFIG_EIR_DATA_EVT *.

Public Members

esp_bt_status_t stat: config EIR status: ESP_BT_STATUS_SUCCESS: config success ESP_BT_STATUS_EIR_TOO_LARGE: the EIR data is more than 240B. The EIR may not contain the whole data. others: failed

uint8_t eir_type_num: the number of EIR types in EIR type

esp_bt_eir_type_t eir_type[12]: EIR types in EIR type

struct disc_res_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_DISC_RES_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

int num_prop: number of properties got

esp_bt_gap_dev_prop_t *prop: properties discovered from the new device

struct disc_state_changed_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_DISC_STATE_CHANGED_EVT.

Public Members

esp_bt_gap_discovery_state_t state: discovery state

struct key_notif_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_KEY_NOTIF_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

uint32_t passkey: the numeric value for passkey entry.

struct key_req_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_KEY_REQ_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

struct mode_chg_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_MODE_CHG_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_pm_mode_t mode: PM mode

struct pin_req_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_PIN_REQ_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

bool min_16_digit: TRUE if the pin returned must be at least 16 digits

struct qos_cmpl_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_QOS_CMPL_EVT.

Public Members

esp_bt_status_t stat: QoS status

esp_bd_addr_t bda: remote bluetooth device address

uint32_t t_poll: poll interval, the maximum time between transmissions which from the master to a particular slave on the ACL logical transport. unit is 0.625ms.

struct read_rmt_name_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_READ_REMOTE_NAME_EVT.

Public Members

esp_bt_status_t stat: read Remote Name status

uint8_t rmt_name[(248) + 1]: Remote device name

esp_bd_addr_t bda: remote bluetooth device address

struct read_rssi_delta_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_READ_RSSI_DELTA_EVT *.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_status_t stat: read rssi status

int8_t rssi_delta: rssi delta value range -128 ~127, The value zero indicates that the RSSI is inside the Golden Receive Power Range, the Golden Receive Power Range is from ESP_BT_GAP_RSSI_LOW_THRLD to ESP_BT_GAP_RSSI_HIGH_THRLD

struct rmt_srvc_rec_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_RMT_SRVC_REC_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_status_t stat: service search status

struct rmt_srvcs_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_RMT_SRVCS_EVT.

Public Members

esp_bd_addr_t bda: remote bluetooth device address

esp_bt_status_t stat: service search status

int num_uuids: number of UUID in uuid_list

esp_bt_uuid_t *uuid_list: list of service UUIDs of remote device

struct set_afh_channels_param

#include <esp_gap_bt_api.h>

ESP_BT_GAP_SET_AFH_CHANNELS_EVT.

Public Members

esp_bt_status_t stat: set AFH channel status

Structures

struct esp_bt_cod_t

Class of device.

Public Members

uint32_t reserved_2: undefined

uint32_t minor: minor class

uint32_t major: major class

uint32_t service: service class

uint32_t reserved_8: undefined

struct esp_bt_gap_dev_prop_t

Bluetooth Device Property Descriptor.

Public Members

esp_bt_gap_dev_prop_type_t type: Device property type

int len: Device property value length

void *val: Device property value

struct esp_bt_eir_data_t

EIR data content, according to “Supplement to the Bluetooth Core Specification”.

Public Members

bool fec_required: FEC is required or not, true by default

bool include_txpower: EIR data include TX power, false by default

bool include_uuid: EIR data include UUID, false by default

uint8_t flag: EIR flags, see ESP_BT_EIR_FLAG for details, EIR will not include flag if it is 0, 0 by default

uint16_t manufacturer_len: Manufacturer data length, 0 by default

uint8_t *p_manufacturer_data: Manufacturer data point

uint16_t url_len: URL length, 0 by default

uint8_t *p_url: URL point

Macros

ESP_BT_GAP_RSSI_HIGH_THRLD

RSSI threshold.

High RSSI threshold

ESP_BT_GAP_RSSI_LOW_THRLD: Low RSSI threshold

ESP_BT_GAP_AFH_CHANNELS_LEN

ESP_BT_GAP_MAX_BDNAME_LEN: Maximum bytes of Bluetooth device name.

ESP_BT_GAP_EIR_DATA_LEN: Maximum size of EIR Significant part.

ESP_BT_EIR_TYPE_FLAGS

Extended Inquiry Response data type.

Flag with information such as BR/EDR and LE support

ESP_BT_EIR_TYPE_INCMPL_16BITS_UUID: Incomplete list of 16-bit service UUIDs

ESP_BT_EIR_TYPE_CMPL_16BITS_UUID: Complete list of 16-bit service UUIDs

ESP_BT_EIR_TYPE_INCMPL_32BITS_UUID: Incomplete list of 32-bit service UUIDs

ESP_BT_EIR_TYPE_CMPL_32BITS_UUID: Complete list of 32-bit service UUIDs

ESP_BT_EIR_TYPE_INCMPL_128BITS_UUID: Incomplete list of 128-bit service UUIDs

ESP_BT_EIR_TYPE_CMPL_128BITS_UUID: Complete list of 128-bit service UUIDs

ESP_BT_EIR_TYPE_SHORT_LOCAL_NAME: Shortened Local Name

ESP_BT_EIR_TYPE_CMPL_LOCAL_NAME: Complete Local Name

ESP_BT_EIR_TYPE_TX_POWER_LEVEL: Tx power level, value is 1 octet ranging from -127 to 127, unit is dBm

ESP_BT_EIR_TYPE_URL: Uniform resource identifier

ESP_BT_EIR_TYPE_MANU_SPECIFIC: Manufacturer specific data

ESP_BT_EIR_TYPE_MAX_NUM: MAX number of EIR type

ESP_BT_EIR_FLAG_LIMIT_DISC

ESP_BT_EIR_FLAG_GEN_DISC

ESP_BT_EIR_FLAG_BREDR_NOT_SPT

ESP_BT_EIR_FLAG_DMT_CONTROLLER_SPT

ESP_BT_EIR_FLAG_DMT_HOST_SPT

ESP_BT_EIR_MAX_LEN

ESP_BT_PIN_CODE_LEN: Max pin code length

ESP_BT_IO_CAP_OUT

ESP_BT_IO_CAP_IO

ESP_BT_IO_CAP_IN

ESP_BT_IO_CAP_NONE

ESP_BT_PM_MD_ACTIVE: Active mode

ESP_BT_PM_MD_HOLD: Hold mode

ESP_BT_PM_MD_SNIFF: Sniff mode

ESP_BT_PM_MD_PARK: Park state

ESP_BT_COD_SRVC_BIT_MASK

Bits of major service class field.

Major service bit mask

ESP_BT_COD_SRVC_BIT_OFFSET: Major service bit offset

ESP_BT_COD_MAJOR_DEV_BIT_MASK

Bits of major device class field.

Major device bit mask

ESP_BT_COD_MAJOR_DEV_BIT_OFFSET: Major device bit offset

ESP_BT_COD_MINOR_DEV_BIT_MASK

Bits of minor device class field.

Minor device bit mask

ESP_BT_COD_MINOR_DEV_BIT_OFFSET: Minor device bit offset

ESP_BT_COD_FORMAT_TYPE_BIT_MASK

Bits of format type.

Format type bit mask

ESP_BT_COD_FORMAT_TYPE_BIT_OFFSET: Format type bit offset

ESP_BT_COD_FORMAT_TYPE_1: Class of device format type 1.

ESP_BT_GAP_MIN_INQ_LEN: Minimum and Maximum inquiry length Minimum inquiry duration, unit is 1.28s

ESP_BT_GAP_MAX_INQ_LEN: Maximum inquiry duration, unit is 1.28s

Type Definitions

typedef uint8_t esp_bt_gap_afh_channels[10]

typedef uint8_t esp_bt_eir_type_t

typedef uint8_t esp_bt_pin_code_t[16]: Pin Code (upto 128 bits) MSB is 0

typedef uint8_t esp_bt_io_cap_t: Combination of the IO Capability

typedef uint8_t esp_bt_pm_mode_t

typedef void (*esp_bt_gap_cb_t)(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *param)

bluetooth GAP callback function type

Param event: : Event type
Param param: : Pointer to callback parameter

Enumerations

enum esp_bt_cod_mode_t

class of device settings

Values:

enumerator ESP_BT_SET_COD_MAJOR_MINOR: overwrite major, minor class

enumerator ESP_BT_SET_COD_SERVICE_CLASS: set the bits in the input, the current bit will remain

enumerator ESP_BT_CLR_COD_SERVICE_CLASS: clear the bits in the input, others will remain

enumerator ESP_BT_SET_COD_ALL: overwrite major, minor, set the bits in service class

enumerator ESP_BT_INIT_COD: overwrite major, minor, and service class

enum esp_bt_connection_mode_t

Discoverability and Connectability mode.

Values:

enumerator ESP_BT_NON_CONNECTABLE: Non-connectable

enumerator ESP_BT_CONNECTABLE: Connectable

enum esp_bt_discovery_mode_t

Values:

enumerator ESP_BT_NON_DISCOVERABLE: Non-discoverable

enumerator ESP_BT_LIMITED_DISCOVERABLE: Limited Discoverable

enumerator ESP_BT_GENERAL_DISCOVERABLE: General Discoverable

enum esp_bt_gap_dev_prop_type_t

Bluetooth Device Property type.

Values:

enumerator ESP_BT_GAP_DEV_PROP_BDNAME: Bluetooth device name, value type is int8_t []

enumerator ESP_BT_GAP_DEV_PROP_COD: Class of Device, value type is uint32_t

enumerator ESP_BT_GAP_DEV_PROP_RSSI: Received Signal strength Indication, value type is int8_t, ranging from -128 to 127

enumerator ESP_BT_GAP_DEV_PROP_EIR: Extended Inquiry Response, value type is uint8_t []

enum esp_bt_cod_srvc_t

Major service class field of Class of Device, mutiple bits can be set.

Values:

enumerator ESP_BT_COD_SRVC_NONE: None indicates an invalid value

enumerator ESP_BT_COD_SRVC_LMTD_DISCOVER: Limited Discoverable Mode

enumerator ESP_BT_COD_SRVC_POSITIONING: Positioning (Location identification)

enumerator ESP_BT_COD_SRVC_NETWORKING: Networking, e.g. LAN, Ad hoc

enumerator ESP_BT_COD_SRVC_RENDERING: Rendering, e.g. Printing, Speakers

enumerator ESP_BT_COD_SRVC_CAPTURING: Capturing, e.g. Scanner, Microphone

enumerator ESP_BT_COD_SRVC_OBJ_TRANSFER: Object Transfer, e.g. v-Inbox, v-Folder

enumerator ESP_BT_COD_SRVC_AUDIO: Audio, e.g. Speaker, Microphone, Headset service

enumerator ESP_BT_COD_SRVC_TELEPHONY: Telephony, e.g. Cordless telephony, Modem, Headset service

enumerator ESP_BT_COD_SRVC_INFORMATION: Information, e.g., WEB-server, WAP-server

enum esp_bt_pin_type_t

Values:

enumerator ESP_BT_PIN_TYPE_VARIABLE: Refer to BTM_PIN_TYPE_VARIABLE

enumerator ESP_BT_PIN_TYPE_FIXED: Refer to BTM_PIN_TYPE_FIXED

enum esp_bt_sp_param_t

Values:

enumerator ESP_BT_SP_IOCAP_MODE: Set IO mode

enum esp_bt_cod_major_dev_t

Major device class field of Class of Device.

Values:

enumerator ESP_BT_COD_MAJOR_DEV_MISC: Miscellaneous

enumerator ESP_BT_COD_MAJOR_DEV_COMPUTER: Computer

enumerator ESP_BT_COD_MAJOR_DEV_PHONE: Phone(cellular, cordless, pay phone, modem

enumerator ESP_BT_COD_MAJOR_DEV_LAN_NAP: LAN, Network Access Point

enumerator ESP_BT_COD_MAJOR_DEV_AV: Audio/Video(headset, speaker, stereo, video display, VCR

enumerator ESP_BT_COD_MAJOR_DEV_PERIPHERAL: Peripheral(mouse, joystick, keyboard)

enumerator ESP_BT_COD_MAJOR_DEV_IMAGING: Imaging(printer, scanner, camera, display

enumerator ESP_BT_COD_MAJOR_DEV_WEARABLE: Wearable

enumerator ESP_BT_COD_MAJOR_DEV_TOY: Toy

enumerator ESP_BT_COD_MAJOR_DEV_HEALTH: Health

enumerator ESP_BT_COD_MAJOR_DEV_UNCATEGORIZED: Uncategorized: device not specified

enum esp_bt_gap_discovery_state_t

Bluetooth Device Discovery state

Values:

enumerator ESP_BT_GAP_DISCOVERY_STOPPED: Device discovery stopped

enumerator ESP_BT_GAP_DISCOVERY_STARTED: Device discovery started

enum esp_bt_gap_cb_event_t

BT GAP callback events.

Values:

enumerator ESP_BT_GAP_DISC_RES_EVT: Device discovery result event

enumerator ESP_BT_GAP_DISC_STATE_CHANGED_EVT: Discovery state changed event

enumerator ESP_BT_GAP_RMT_SRVCS_EVT: Get remote services event

enumerator ESP_BT_GAP_RMT_SRVC_REC_EVT: Get remote service record event

enumerator ESP_BT_GAP_AUTH_CMPL_EVT: Authentication complete event

enumerator ESP_BT_GAP_PIN_REQ_EVT: Legacy Pairing Pin code request

enumerator ESP_BT_GAP_CFM_REQ_EVT: Security Simple Pairing User Confirmation request.

enumerator ESP_BT_GAP_KEY_NOTIF_EVT: Security Simple Pairing Passkey Notification

enumerator ESP_BT_GAP_KEY_REQ_EVT: Security Simple Pairing Passkey request

enumerator ESP_BT_GAP_READ_RSSI_DELTA_EVT: Read rssi event

enumerator ESP_BT_GAP_CONFIG_EIR_DATA_EVT: Config EIR data event

enumerator ESP_BT_GAP_SET_AFH_CHANNELS_EVT: Set AFH channels event

enumerator ESP_BT_GAP_READ_REMOTE_NAME_EVT: Read Remote Name event

enumerator ESP_BT_GAP_MODE_CHG_EVT

enumerator ESP_BT_GAP_REMOVE_BOND_DEV_COMPLETE_EVT: remove bond device complete event

enumerator ESP_BT_GAP_QOS_CMPL_EVT: QOS complete event

enumerator ESP_BT_GAP_EVT_MAX

enum esp_bt_inq_mode_t

Inquiry Mode

Values:

enumerator ESP_BT_INQ_MODE_GENERAL_INQUIRY: General inquiry mode

enumerator ESP_BT_INQ_MODE_LIMITED_INQUIRY: Limited inquiry mode

提供有关此文档的反馈