GATT CLIENT API

Application Example

Check bluetooth/bluedroid/ble folder in ESP-IDF examples, which contains the following demos and their tutorials:

API Reference

Functions

esp_err_t esp_ble_gattc_register_callback(esp_gattc_cb_t callback)

This function is called to register application callbacks with GATTC module.

参数

callback – [in] : pointer to the application callback function.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_app_register(uint16_t app_id)

This function is called to register application callbacks with GATTC module.

参数

app_id – [in] : Application Identify (UUID), for different application

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_app_unregister(esp_gatt_if_t gattc_if)

This function is called to unregister an application from GATTC module.

参数

gattc_if – [in] Gatt client access interface.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_open(esp_gatt_if_t gattc_if, esp_bd_addr_t remote_bda, esp_ble_addr_type_t remote_addr_type, bool is_direct)

Open a direct connection or add a background auto connection.

参数

  • gattc_if – [in] Gatt client access interface.

  • remote_bda – [in] remote device bluetooth device address.

  • remote_addr_type – [in] remote device bluetooth device the address type.

  • is_direct – [in] direct connection or background auto connection(by now, background auto connection is not supported).

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_aux_open(esp_gatt_if_t gattc_if, esp_bd_addr_t remote_bda, esp_ble_addr_type_t remote_addr_type, bool is_direct)
esp_err_t esp_ble_gattc_close(esp_gatt_if_t gattc_if, uint16_t conn_id)

Close the virtual connection to the GATT server. gattc may have multiple virtual GATT server connections when multiple app_id registered, this API only close one virtual GATT server connection. if there exist other virtual GATT server connections, it does not disconnect the physical connection. if you want to disconnect the physical connection directly, you can use esp_ble_gap_disconnect(esp_bd_addr_t remote_device).

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID to be closed.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_send_mtu_req(esp_gatt_if_t gattc_if, uint16_t conn_id)

Configure the MTU size in the GATT channel. This can be done only once per connection. Before using, use esp_ble_gatt_set_local_mtu() to configure the local MTU size.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_search_service(esp_gatt_if_t gattc_if, uint16_t conn_id, esp_bt_uuid_t *filter_uuid)

This function is called to get service from local cache. This function report service search result by a callback event, and followed by a service search complete event.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID.

  • filter_uuid – [in] a UUID of the service application is interested in. If Null, discover for all services.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_service(esp_gatt_if_t gattc_if, uint16_t conn_id, esp_bt_uuid_t *svc_uuid, esp_gattc_service_elem_t *result, uint16_t *count, uint16_t offset)

Find all the service with the given service uuid in the gattc cache, if the svc_uuid is NULL, find all the service. Note: It just get service from local cache, won’t get from remote devices. If want to get it from remote device, need to used the esp_ble_gattc_cache_refresh, then call esp_ble_gattc_get_service again.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • svc_uuid – [in] the pointer to the service uuid.

  • result – [out] The pointer to the service which has been found in the gattc cache.

  • count – [inout] input the number of service want to find, it will output the number of service has been found in the gattc cache with the given service uuid.

  • offset – [in] Offset of the service position to get.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_all_char(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_gattc_char_elem_t *result, uint16_t *count, uint16_t offset)

Find all the characteristic with the given service in the gattc cache Note: It just get characteristic from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • start_handle – [in] the attribute start handle.

  • end_handle – [in] the attribute end handle

  • result – [out] The pointer to the characteristic in the service.

  • count – [inout] input the number of characteristic want to find, it will output the number of characteristic has been found in the gattc cache with the given service.

  • offset – [in] Offset of the characteristic position to get.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_all_descr(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t char_handle, esp_gattc_descr_elem_t *result, uint16_t *count, uint16_t offset)

Find all the descriptor with the given characteristic in the gattc cache Note: It just get descriptor from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • char_handle – [in] the given characteristic handle

  • result – [out] The pointer to the descriptor in the characteristic.

  • count – [inout] input the number of descriptor want to find, it will output the number of descriptor has been found in the gattc cache with the given characteristic.

  • offset – [in] Offset of the descriptor position to get.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_char_by_uuid(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_bt_uuid_t char_uuid, esp_gattc_char_elem_t *result, uint16_t *count)

Find the characteristic with the given characteristic uuid in the gattc cache Note: It just get characteristic from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • start_handle – [in] the attribute start handle

  • end_handle – [in] the attribute end handle

  • char_uuid – [in] the characteristic uuid

  • result – [out] The pointer to the characteristic in the service.

  • count – [inout] input the number of characteristic want to find, it will output the number of characteristic has been found in the gattc cache with the given service.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_descr_by_uuid(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_bt_uuid_t char_uuid, esp_bt_uuid_t descr_uuid, esp_gattc_descr_elem_t *result, uint16_t *count)

Find the descriptor with the given characteristic uuid in the gattc cache Note: It just get descriptor from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • start_handle – [in] the attribute start handle

  • end_handle – [in] the attribute end handle

  • char_uuid – [in] the characteristic uuid.

  • descr_uuid – [in] the descriptor uuid.

  • result – [out] The pointer to the descriptor in the given characteristic.

  • count – [inout] input the number of descriptor want to find, it will output the number of descriptor has been found in the gattc cache with the given characteristic.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_descr_by_char_handle(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t char_handle, esp_bt_uuid_t descr_uuid, esp_gattc_descr_elem_t *result, uint16_t *count)

Find the descriptor with the given characteristic handle in the gattc cache Note: It just get descriptor from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • char_handle – [in] the characteristic handle.

  • descr_uuid – [in] the descriptor uuid.

  • result – [out] The pointer to the descriptor in the given characteristic.

  • count – [inout] input the number of descriptor want to find, it will output the number of descriptor has been found in the gattc cache with the given characteristic.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_include_service(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_bt_uuid_t *incl_uuid, esp_gattc_incl_svc_elem_t *result, uint16_t *count)

Find the include service with the given service handle in the gattc cache Note: It just get include service from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • start_handle – [in] the attribute start handle

  • end_handle – [in] the attribute end handle

  • incl_uuid – [in] the include service uuid

  • result – [out] The pointer to the include service in the given service.

  • count – [inout] input the number of include service want to find, it will output the number of include service has been found in the gattc cache with the given service.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_attr_count(esp_gatt_if_t gattc_if, uint16_t conn_id, esp_gatt_db_attr_type_t type, uint16_t start_handle, uint16_t end_handle, uint16_t char_handle, uint16_t *count)

Find the attribute count with the given service or characteristic in the gattc cache.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] connection ID which identify the server.

  • type – [in] the attribute type.

  • start_handle – [in] the attribute start handle, if the type is ESP_GATT_DB_DESCRIPTOR, this parameter should be ignore

  • end_handle – [in] the attribute end handle, if the type is ESP_GATT_DB_DESCRIPTOR, this parameter should be ignore

  • char_handle – [in] the characteristic handle, this parameter valid when the type is ESP_GATT_DB_DESCRIPTOR. If the type isn’t ESP_GATT_DB_DESCRIPTOR, this parameter should be ignore.

  • count – [out] output the number of attribute has been found in the gattc cache with the given attribute type.

返回

  • ESP_OK: success

  • other: failed

esp_gatt_status_t esp_ble_gattc_get_db(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_gattc_db_elem_t *db, uint16_t *count)

This function is called to get the GATT database. Note: It just get attribute data base from local cache, won’t get from remote devices.

参数

  • gattc_if – [in] Gatt client access interface.

  • start_handle – [in] the attribute start handle

  • end_handle – [in] the attribute end handle

  • conn_id – [in] connection ID which identify the server.

  • db – [in] output parameter which will contain the GATT database copy. Caller is responsible for freeing it.

  • count – [in] number of elements in database.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_read_char(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, esp_gatt_auth_req_t auth_req)

This function is called to read a service’s characteristics of the given characteristic handle.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • handle – [in] : characteritic handle to read.

  • auth_req – [in] : authenticate request type

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_read_by_type(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t start_handle, uint16_t end_handle, esp_bt_uuid_t *uuid, esp_gatt_auth_req_t auth_req)

This function is called to read a service’s characteristics of the given characteristic UUID.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • start_handle – [in] : the attribute start handle.

  • end_handle – [in] : the attribute end handle

  • uuid – [in] : The UUID of attribute which will be read.

  • auth_req – [in] : authenticate request type

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_read_multiple(esp_gatt_if_t gattc_if, uint16_t conn_id, esp_gattc_multi_t *read_multi, esp_gatt_auth_req_t auth_req)

This function is called to read multiple characteristic or characteristic descriptors.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • read_multi – [in] : pointer to the read multiple parameter.

  • auth_req – [in] : authenticate request type

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_read_char_descr(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, esp_gatt_auth_req_t auth_req)

This function is called to read a characteristics descriptor.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • handle – [in] : descriptor handle to read.

  • auth_req – [in] : authenticate request type

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_write_char(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, uint16_t value_len, uint8_t *value, esp_gatt_write_type_t write_type, esp_gatt_auth_req_t auth_req)

This function is called to write characteristic value.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • handle – [in] : characteristic handle to write.

  • value_len – [in] length of the value to be written.

  • value – [in] : the value to be written.

  • write_type – [in] : the type of attribute write operation.

  • auth_req – [in] : authentication request.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_write_char_descr(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, uint16_t value_len, uint8_t *value, esp_gatt_write_type_t write_type, esp_gatt_auth_req_t auth_req)

This function is called to write characteristic descriptor value.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID

  • handle – [in] : descriptor hadle to write.

  • value_len – [in] length of the value to be written.

  • value – [in] : the value to be written.

  • write_type – [in] : the type of attribute write operation.

  • auth_req – [in] : authentication request.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_prepare_write(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, uint16_t offset, uint16_t value_len, uint8_t *value, esp_gatt_auth_req_t auth_req)

This function is called to prepare write a characteristic value.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • handle – [in] : characteristic handle to prepare write.

  • offset – [in] : offset of the write value.

  • value_len – [in] length of the value to be written.

  • value – [in] : the value to be written.

  • auth_req – [in] : authentication request.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_prepare_write_char_descr(esp_gatt_if_t gattc_if, uint16_t conn_id, uint16_t handle, uint16_t offset, uint16_t value_len, uint8_t *value, esp_gatt_auth_req_t auth_req)

This function is called to prepare write a characteristic descriptor value.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • handle – [in] : characteristic descriptor handle to prepare write.

  • offset – [in] : offset of the write value.

  • value_len – [in] length of the value to be written.

  • value – [in] : the value to be written.

  • auth_req – [in] : authentication request.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_execute_write(esp_gatt_if_t gattc_if, uint16_t conn_id, bool is_execute)

This function is called to execute write a prepare write sequence.

参数

  • gattc_if – [in] Gatt client access interface.

  • conn_id – [in] : connection ID.

  • is_execute – [in] : execute or cancel.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_register_for_notify(esp_gatt_if_t gattc_if, esp_bd_addr_t server_bda, uint16_t handle)

This function is called to register for notification of a service.

参数

  • gattc_if – [in] Gatt client access interface.

  • server_bda – [in] : target GATT server.

  • handle – [in] : GATT characteristic handle.

返回

  • ESP_OK: registration succeeds

  • other: failed

esp_err_t esp_ble_gattc_unregister_for_notify(esp_gatt_if_t gattc_if, esp_bd_addr_t server_bda, uint16_t handle)

This function is called to de-register for notification of a service.

参数

  • gattc_if – [in] Gatt client access interface.

  • server_bda – [in] : target GATT server.

  • handle – [in] : GATT characteristic handle.

返回

  • ESP_OK: unregister succeeds

  • other: failed

esp_err_t esp_ble_gattc_cache_refresh(esp_bd_addr_t remote_bda)

Refresh the server cache store in the gattc stack of the remote device. If the device is connected, this API will restart the discovery of service information of the remote device.

参数

remote_bda – [in] remote device BD address.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_cache_assoc(esp_gatt_if_t gattc_if, esp_bd_addr_t src_addr, esp_bd_addr_t assoc_addr, bool is_assoc)

Add or delete the associated address with the source address. Note: The role of this API is mainly when the client side has stored a server-side database, when it needs to connect another device, but the device’s attribute database is the same as the server database stored on the client-side, calling this API can use the database that the device has stored used as the peer server database to reduce the attribute database search and discovery process and speed up the connection time. The associated address mains that device want to used the database has stored in the local cache. The source address mains that device want to share the database to the associated address device.

参数

  • gattc_if – [in] Gatt client access interface.

  • src_addr – [in] the source address which provide the attribute table.

  • assoc_addr – [in] the associated device address which went to share the attribute table with the source address.

  • is_assoc – [in] true add the associated device address, false remove the associated device address.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_cache_get_addr_list(esp_gatt_if_t gattc_if)

Get the address list which has store the attribute table in the gattc cache. There will callback ESP_GATTC_GET_ADDR_LIST_EVT event when get address list complete.

参数

gattc_if – [in] Gatt client access interface.

返回

  • ESP_OK: success

  • other: failed

esp_err_t esp_ble_gattc_cache_clean(esp_bd_addr_t remote_bda)

Clean the service cache of this device in the gattc stack,.

参数

remote_bda – [in] remote device BD address.

返回

  • ESP_OK: success

  • other: failed

Unions

union esp_ble_gattc_cb_param_t
#include <esp_gattc_api.h>

Gatt client callback parameters union.

Public Members

struct esp_ble_gattc_cb_param_t::gattc_reg_evt_param reg

Gatt client callback param of ESP_GATTC_REG_EVT

struct esp_ble_gattc_cb_param_t::gattc_open_evt_param open

Gatt client callback param of ESP_GATTC_OPEN_EVT

struct esp_ble_gattc_cb_param_t::gattc_close_evt_param close

Gatt client callback param of ESP_GATTC_CLOSE_EVT

struct esp_ble_gattc_cb_param_t::gattc_cfg_mtu_evt_param cfg_mtu

Gatt client callback param of ESP_GATTC_CFG_MTU_EVT

struct esp_ble_gattc_cb_param_t::gattc_search_cmpl_evt_param search_cmpl

Gatt client callback param of ESP_GATTC_SEARCH_CMPL_EVT

struct esp_ble_gattc_cb_param_t::gattc_search_res_evt_param search_res

Gatt client callback param of ESP_GATTC_SEARCH_RES_EVT

struct esp_ble_gattc_cb_param_t::gattc_read_char_evt_param read

Gatt client callback param of ESP_GATTC_READ_CHAR_EVT

struct esp_ble_gattc_cb_param_t::gattc_write_evt_param write

Gatt client callback param of ESP_GATTC_WRITE_DESCR_EVT

struct esp_ble_gattc_cb_param_t::gattc_exec_cmpl_evt_param exec_cmpl

Gatt client callback param of ESP_GATTC_EXEC_EVT

struct esp_ble_gattc_cb_param_t::gattc_notify_evt_param notify

Gatt client callback param of ESP_GATTC_NOTIFY_EVT

struct esp_ble_gattc_cb_param_t::gattc_srvc_chg_evt_param srvc_chg

Gatt client callback param of ESP_GATTC_SRVC_CHG_EVT

struct esp_ble_gattc_cb_param_t::gattc_congest_evt_param congest

Gatt client callback param of ESP_GATTC_CONGEST_EVT

struct esp_ble_gattc_cb_param_t::gattc_reg_for_notify_evt_param reg_for_notify

Gatt client callback param of ESP_GATTC_REG_FOR_NOTIFY_EVT

struct esp_ble_gattc_cb_param_t::gattc_unreg_for_notify_evt_param unreg_for_notify

Gatt client callback param of ESP_GATTC_UNREG_FOR_NOTIFY_EVT

struct esp_ble_gattc_cb_param_t::gattc_connect_evt_param connect

Gatt client callback param of ESP_GATTC_CONNECT_EVT

struct esp_ble_gattc_cb_param_t::gattc_disconnect_evt_param disconnect

Gatt client callback param of ESP_GATTC_DISCONNECT_EVT

struct esp_ble_gattc_cb_param_t::gattc_set_assoc_addr_cmp_evt_param set_assoc_cmp

Gatt client callback param of ESP_GATTC_SET_ASSOC_EVT

struct esp_ble_gattc_cb_param_t::gattc_get_addr_list_evt_param get_addr_list

Gatt client callback param of ESP_GATTC_GET_ADDR_LIST_EVT

struct esp_ble_gattc_cb_param_t::gattc_queue_full_evt_param queue_full

Gatt client callback param of ESP_GATTC_QUEUE_FULL_EVT

struct esp_ble_gattc_cb_param_t::gattc_dis_srvc_cmpl_evt_param dis_srvc_cmpl

Gatt client callback param of ESP_GATTC_DIS_SRVC_CMPL_EVT

struct gattc_cfg_mtu_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_CFG_MTU_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

uint16_t mtu

MTU size

struct gattc_close_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_CLOSE_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

esp_bd_addr_t remote_bda

Remote bluetooth device address

esp_gatt_conn_reason_t reason

The reason of gatt connection close

struct gattc_congest_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_CONGEST_EVT.

Public Members

uint16_t conn_id

Connection id

bool congested

Congested or not

struct gattc_connect_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_CONNECT_EVT.

Public Members

uint16_t conn_id

Connection id

uint8_t link_role

Link role : master role = 0 ; slave role = 1

esp_bd_addr_t remote_bda

Remote bluetooth device address

esp_gatt_conn_params_t conn_params

current connection parameters

struct gattc_dis_srvc_cmpl_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_DIS_SRVC_CMPL_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

struct gattc_disconnect_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_DISCONNECT_EVT.

Public Members

esp_gatt_conn_reason_t reason

disconnection reason

uint16_t conn_id

Connection id

uint8_t link_role

Link role : master role = 0 ; slave role = 1

esp_bd_addr_t remote_bda

Remote bluetooth device address

struct gattc_exec_cmpl_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_EXEC_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

struct gattc_get_addr_list_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_GET_ADDR_LIST_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint8_t num_addr

The number of address in the gattc cache address list

esp_bd_addr_t *addr_list

The pointer to the address list which has been get from the gattc cache

struct gattc_notify_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_NOTIFY_EVT.

Public Members

uint16_t conn_id

Connection id

esp_bd_addr_t remote_bda

Remote bluetooth device address

uint16_t handle

The Characteristic or descriptor handle

uint16_t value_len

Notify attribute value

uint8_t *value

Notify attribute value

bool is_notify

True means notify, false means indicate

struct gattc_open_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_OPEN_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

esp_bd_addr_t remote_bda

Remote bluetooth device address

uint16_t mtu

MTU size

struct gattc_queue_full_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_QUEUE_FULL_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

bool is_full

The gattc command queue is full or not

struct gattc_read_char_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_READ_CHAR_EVT, ESP_GATTC_READ_DESCR_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

uint16_t handle

Characteristic handle

uint8_t *value

Characteristic value

uint16_t value_len

Characteristic value length

struct gattc_reg_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_REG_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t app_id

Application id which input in register API

struct gattc_reg_for_notify_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_REG_FOR_NOTIFY_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t handle

The characteristic or descriptor handle

struct gattc_search_cmpl_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_SEARCH_CMPL_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

esp_service_source_t searched_service_source

The source of the service information

struct gattc_search_res_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_SEARCH_RES_EVT.

Public Members

uint16_t conn_id

Connection id

uint16_t start_handle

Service start handle

uint16_t end_handle

Service end handle

esp_gatt_id_t srvc_id

Service id, include service uuid and other information

bool is_primary

True if this is the primary service

struct gattc_set_assoc_addr_cmp_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_SET_ASSOC_EVT.

Public Members

esp_gatt_status_t status

Operation status

struct gattc_srvc_chg_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_SRVC_CHG_EVT.

Public Members

esp_bd_addr_t remote_bda

Remote bluetooth device address

struct gattc_unreg_for_notify_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_UNREG_FOR_NOTIFY_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t handle

The characteristic or descriptor handle

struct gattc_write_evt_param
#include <esp_gattc_api.h>

ESP_GATTC_WRITE_CHAR_EVT, ESP_GATTC_PREP_WRITE_EVT, ESP_GATTC_WRITE_DESCR_EVT.

Public Members

esp_gatt_status_t status

Operation status

uint16_t conn_id

Connection id

uint16_t handle

The Characteristic or descriptor handle

uint16_t offset

The prepare write offset, this value is valid only when prepare write

Type Definitions

typedef void (*esp_gattc_cb_t)(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param)

GATT Client callback function type.

Param event

: Event type

Param gattc_if

: GATT client access interface, normally different gattc_if correspond to different profile

Param param

: Point to callback parameter, currently is union type

Enumerations

enum esp_gattc_cb_event_t

GATT Client callback function events.

Values:

enumerator ESP_GATTC_REG_EVT

When GATT client is registered, the event comes

enumerator ESP_GATTC_UNREG_EVT

When GATT client is unregistered, the event comes

enumerator ESP_GATTC_OPEN_EVT

When GATT virtual connection is set up, the event comes

enumerator ESP_GATTC_READ_CHAR_EVT

When GATT characteristic is read, the event comes

enumerator ESP_GATTC_WRITE_CHAR_EVT

When GATT characteristic write operation completes, the event comes

enumerator ESP_GATTC_CLOSE_EVT

When GATT virtual connection is closed, the event comes

enumerator ESP_GATTC_SEARCH_CMPL_EVT

When GATT service discovery is completed, the event comes

enumerator ESP_GATTC_SEARCH_RES_EVT

When GATT service discovery result is got, the event comes

enumerator ESP_GATTC_READ_DESCR_EVT

When GATT characteristic descriptor read completes, the event comes

enumerator ESP_GATTC_WRITE_DESCR_EVT

When GATT characteristic descriptor write completes, the event comes

enumerator ESP_GATTC_NOTIFY_EVT

When GATT notification or indication arrives, the event comes

enumerator ESP_GATTC_PREP_WRITE_EVT

When GATT prepare-write operation completes, the event comes

enumerator ESP_GATTC_EXEC_EVT

When write execution completes, the event comes

enumerator ESP_GATTC_ACL_EVT

When ACL connection is up, the event comes

enumerator ESP_GATTC_CANCEL_OPEN_EVT

When GATT client ongoing connection is cancelled, the event comes

enumerator ESP_GATTC_SRVC_CHG_EVT

When “service changed” occurs, the event comes

enumerator ESP_GATTC_ENC_CMPL_CB_EVT

When encryption procedure completes, the event comes

enumerator ESP_GATTC_CFG_MTU_EVT

When configuration of MTU completes, the event comes

enumerator ESP_GATTC_ADV_DATA_EVT

When advertising of data, the event comes

enumerator ESP_GATTC_MULT_ADV_ENB_EVT

When multi-advertising is enabled, the event comes

enumerator ESP_GATTC_MULT_ADV_UPD_EVT

When multi-advertising parameters are updated, the event comes

enumerator ESP_GATTC_MULT_ADV_DATA_EVT

When multi-advertising data arrives, the event comes

enumerator ESP_GATTC_MULT_ADV_DIS_EVT

When multi-advertising is disabled, the event comes

enumerator ESP_GATTC_CONGEST_EVT

When GATT connection congestion comes, the event comes

enumerator ESP_GATTC_BTH_SCAN_ENB_EVT

When batch scan is enabled, the event comes

enumerator ESP_GATTC_BTH_SCAN_CFG_EVT

When batch scan storage is configured, the event comes

enumerator ESP_GATTC_BTH_SCAN_RD_EVT

When Batch scan read event is reported, the event comes

enumerator ESP_GATTC_BTH_SCAN_THR_EVT

When Batch scan threshold is set, the event comes

enumerator ESP_GATTC_BTH_SCAN_PARAM_EVT

When Batch scan parameters are set, the event comes

enumerator ESP_GATTC_BTH_SCAN_DIS_EVT

When Batch scan is disabled, the event comes

enumerator ESP_GATTC_SCAN_FLT_CFG_EVT

When Scan filter configuration completes, the event comes

enumerator ESP_GATTC_SCAN_FLT_PARAM_EVT

When Scan filter parameters are set, the event comes

enumerator ESP_GATTC_SCAN_FLT_STATUS_EVT

When Scan filter status is reported, the event comes

enumerator ESP_GATTC_ADV_VSC_EVT

When advertising vendor spec content event is reported, the event comes

enumerator ESP_GATTC_REG_FOR_NOTIFY_EVT

When register for notification of a service completes, the event comes

enumerator ESP_GATTC_UNREG_FOR_NOTIFY_EVT

When unregister for notification of a service completes, the event comes

enumerator ESP_GATTC_CONNECT_EVT

When the ble physical connection is set up, the event comes

enumerator ESP_GATTC_DISCONNECT_EVT

When the ble physical connection disconnected, the event comes

enumerator ESP_GATTC_READ_MULTIPLE_EVT

When the ble characteristic or descriptor multiple complete, the event comes

enumerator ESP_GATTC_QUEUE_FULL_EVT

When the gattc command queue full, the event comes

enumerator ESP_GATTC_SET_ASSOC_EVT

When the ble gattc set the associated address complete, the event comes

enumerator ESP_GATTC_GET_ADDR_LIST_EVT

When the ble get gattc address list in cache finish, the event comes

enumerator ESP_GATTC_DIS_SRVC_CMPL_EVT

When the ble discover service complete, the event comes

提供有关此文档的反馈