HFP AG API

API Reference

Header File

components/bt/host/bluedroid/api/include/api/esp_hf_ag_api.h

Functions

esp_err_t esp_hf_ag_register_callback(esp_hf_cb_t callback)

Register application callback function to HFP AG module. This function should be called only after esp_bluedroid_enable() completes successfully.

参数

callback – [in] HFP AG event callback function

返回

ESP_OK: success
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: if callback is a NULL function pointer

esp_err_t esp_hf_ag_init(void)

Initialize the bluetooth HF AG module. This function should be called after esp_bluedroid_enable() completes successfully.

返回

ESP_OK: if the initialization request is sent successfully
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_deinit(void)

De-initialize for HF AG module. This function should be called only after esp_bluedroid_enable() completes successfully.

返回

ESP_OK: success
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_slc_connect(esp_bd_addr_t remote_bda)

To establish a Service Level Connection to remote bluetooth HFP client device. This function must be called after esp_hf_ag_init() and before esp_hf_ag_deinit().

参数

remote_bda – [in] remote bluetooth HFP client device address

返回

ESP_OK: connect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_slc_disconnect(esp_bd_addr_t remote_bda)

Disconnect from the remote HFP client. This function must be called after esp_hf_ag_init() and before esp_hf_ag_deinit().

参数

remote_bda – [in] remote bluetooth device address

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_audio_connect(esp_bd_addr_t remote_bda)

Create audio connection with remote HFP client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_bda – [in] remote bluetooth device address

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_audio_disconnect(esp_bd_addr_t remote_bda)

Release the established audio connection with remote HFP client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_bda – [in] remote bluetooth device address

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_vra_control(esp_bd_addr_t remote_bda, esp_hf_vr_state_t value)

Response of Volume Recognition Command(AT+VRA) from HFP client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_bda – [in] the device address of voice recognition initiator
value – [in] 0 - voice recognition disabled, 1- voice recognition enabled

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_volume_control(esp_bd_addr_t remote_bda, esp_hf_volume_control_target_t type, int volume)

Volume synchronization with HFP client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_bda – [in] remote bluetooth device address
type – [in] volume control target, speaker or microphone
volume – [in] gain of the speaker of microphone, ranges 0 to 15

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_unknown_at_send(esp_bd_addr_t remote_addr, char *unat)

Handle Unknown AT command from HFP Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
unat – [in] User AT command response to HF Client. It will response “ERROR” by default if unat is NULL.

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_cmee_send(esp_bd_addr_t remote_bda, esp_hf_at_response_code_t response_code, esp_hf_cme_err_t error_code)

Unsolicited send extend AT error code to HFP Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_bda – [in] remote bluetooth device address
response_code – [in] AT command response code
error_code – [in] CME error code

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_devices_status_indchange(esp_bd_addr_t remote_addr, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, esp_hf_network_state_t ntk_state, int signal)

Unsolicited send device status notification to HFP Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
call_state – [in] call state
call_setup_state – [in] call setup state
ntk_state – [in] network service state
signal – [in] signal strength from 0 to 5

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_cind_response(esp_bd_addr_t remote_addr, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, esp_hf_network_state_t ntk_state, int signal, esp_hf_roaming_status_t roam, int batt_lev, esp_hf_call_held_status_t call_held_status)

Response to device individual indicators to HFP Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
call_state – [in] call state
call_setup_state – [in] call setup state
ntk_state – [in] network service state
signal – [in] signal strength from 0 to 5
roam – [in] roam state
batt_lev – [in] battery level from 0 to 5
call_held_status – [in] call held status

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_cops_response(esp_bd_addr_t remote_addr, char *name)

Reponse for AT+COPS command from HF Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
name – [in] current operator name

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_clcc_response(esp_bd_addr_t remote_addr, int index, esp_hf_current_call_direction_t dir, esp_hf_current_call_status_t current_call_state, esp_hf_current_call_mode_t mode, esp_hf_current_call_mpty_type_t mpty, char *number, esp_hf_call_addr_type_t type)

Response to AT+CLCC command from HFP Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
index – [in] the index of current call
dir – [in] call direction (incoming/outgoing)
current_call_state – [in] current call state
mode – [in] current call mode (voice/data/fax)
mpty – [in] single or multi type
number – [in] current call number
type – [in] international type or unknow

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_cnum_response(esp_bd_addr_t remote_addr, char *number, esp_hf_subscriber_service_type_t type)

Response for AT+CNUM command from HF Client. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
number – [in] registration number
type – [in] service type (unknown/voice/fax)

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_bsir(esp_bd_addr_t remote_addr, esp_hf_in_band_ring_state_t state)

Inform HF Client that AG Provided in-band ring tone or not. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
state – [in] in-band ring tone state

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_answer_call(esp_bd_addr_t remote_addr, int num_active, int num_held, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, char *number, esp_hf_call_addr_type_t call_addr_type)

Answer Incoming Call from AG. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
num_active – [in] the number of active call
num_held – [in] the number of held call
call_state – [in] call state
call_setup_state – [in] call setup state
number – [in] number of the incoming call
call_addr_type – [in] call address type

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_reject_call(esp_bd_addr_t remote_addr, int num_active, int num_held, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, char *number, esp_hf_call_addr_type_t call_addr_type)

Reject Incoming Call from AG. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
num_active – [in] the number of active call
num_held – [in] the number of held call
call_state – [in] call state
call_setup_state – [in] call setup state
number – [in] number of the incoming call
call_addr_type – [in] call address type

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_out_call(esp_bd_addr_t remote_addr, int num_active, int num_held, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, char *number, esp_hf_call_addr_type_t call_addr_type)

Initiate a call from AG. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
num_active – [in] the number of active call
num_held – [in] the number of held call
call_state – [in] call state
call_setup_state – [in] call setup state
number – [in] number of the outgoing call
call_addr_type – [in] call address type

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_end_call(esp_bd_addr_t remote_addr, int num_active, int num_held, esp_hf_call_status_t call_state, esp_hf_call_setup_status_t call_setup_state, char *number, esp_hf_call_addr_type_t call_addr_type)

End an ongoing call. As a precondition to use this API, Service Level Connection shall exist with HFP client.

参数

remote_addr – [in] remote bluetooth device address
num_active – [in] the number of active call
num_held – [in] the number of held call
call_state – [in] call state
call_setup_state – [in] call setup state
number – [in] number of the call
call_addr_type – [in] call address type

返回

ESP_OK: disconnect request is sent to lower layer
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: others

esp_err_t esp_hf_ag_register_data_callback(esp_hf_incoming_data_cb_t recv, esp_hf_outgoing_data_cb_t send)

Register AG data output function. The callback is only used in the case that Voice Over HCI is enabled.

参数

recv – [in] HFP client incoming data callback function
send – [in] HFP client outgoing data callback function

返回

ESP_OK: success
ESP_INVALID_STATE: if bluetooth stack is not yet enabled
ESP_FAIL: if callback is a NULL function pointer

void esp_hf_ag_outgoing_data_ready(void)

Trigger the lower-layer to fetch and send audio data.

             This function is only used in the case that Voice Over HCI is enabled.
             As a precondition to use this API, Service Level Connection shall exist with HFP client.
             After this function is called, lower layer will invoke esp_hf_client_outgoing_data_cb_t to fetch data

Unions

union esp_hf_cb_param_t

#include <esp_hf_ag_api.h>

HFP AG callback parameters.

Public Members

struct esp_hf_cb_param_t::hf_conn_stat_param conn_stat: AG callback param of ESP_HF_CONNECTION_STATE_EVT

struct esp_hf_cb_param_t::hf_audio_stat_param audio_stat: AG callback param of ESP_HF_AUDIO_STATE_EVT

struct esp_hf_cb_param_t::hf_vra_rep_param vra_rep: AG callback param of ESP_HF_BVRA_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_volume_control_param volume_control: AG callback param of ESP_HF_VOLUME_CONTROL_EVT

struct esp_hf_cb_param_t::hf_unat_rep_param unat_rep: AG callback param of ESP_HF_UNAT_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_cind_param cind: AG callback param of ESP_HF_CIND_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_out_call_param out_call: AG callback param of ESP_HF_DIAL_EVT

struct esp_hf_cb_param_t::hf_vts_rep_param vts_rep: AG callback param of ESP_HF_VTS_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_nrec_param nrec: AG callback param of ESP_HF_NREC_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_wbs_rep_param wbs_rep: AG callback param of ESP_HF_WBS_RESPONSE_EVT

struct esp_hf_cb_param_t::hf_bcs_rep_param bcs_rep: AG callback param of ESP_HF_BCS_RESPONSE_EVT

struct hf_audio_stat_param

#include <esp_hf_ag_api.h>

ESP_HF_AUDIO_STATE_EVT.

Public Members

esp_bd_addr_t remote_addr: Remote bluetooth device address

esp_hf_audio_state_t state: Audio connection state

struct hf_bcs_rep_param

#include <esp_hf_ag_api.h>

ESP_HF_BCS_RESPONSE_EVT.

Public Members

esp_hf_wbs_config_t mode: codec mode CVSD or mSBC

struct hf_cind_param

#include <esp_hf_ag_api.h>

ESP_HF_CIND_RESPONSE_EVT.

Public Members

esp_hf_call_status_t call_status: call status indicator

esp_hf_call_setup_status_t call_setup_status: call setup status indicator

esp_hf_network_state_t svc: bluetooth proprietary call hold status indicator

int signal_strength: bluetooth proprietary call hold status indicator

esp_hf_roaming_status_t roam: bluetooth proprietary call hold status indicator

int battery_level: battery charge value, ranges from 0 to 5

esp_hf_call_held_status_t call_held_status: bluetooth proprietary call hold status indicator

struct hf_conn_stat_param

#include <esp_hf_ag_api.h>

ESP_HS_CONNECTION_STATE_EVT.

Public Members

esp_bd_addr_t remote_bda: Remote bluetooth device address

esp_hf_connection_state_t state: Connection state

uint32_t peer_feat: HF supported features

uint32_t chld_feat: AG supported features on call hold and multiparty services

struct hf_nrec_param

#include <esp_hf_ag_api.h>

ESP_HF_NREC_RESPONSE_EVT.

Public Members

esp_hf_nrec_t state: NREC enabled or disabled

struct hf_out_call_param

#include <esp_hf_ag_api.h>

ESP_HF_DIAL_EVT.

Public Members

esp_bd_addr_t remote_addr: remote bluetooth device address

char *num_or_loc: location in phone memory

struct hf_unat_rep_param

#include <esp_hf_ag_api.h>

ESP_HF_UNAT_RESPONSE_EVT.

Public Members

char *unat: Unknown AT command string

struct hf_volume_control_param

#include <esp_hf_ag_api.h>

ESP_HF_VOLUME_CONTROL_EVT.

Public Members

esp_hf_volume_type_t type: Volume control target, speaker or microphone

int volume: Gain, ranges from 0 to 15

struct hf_vra_rep_param

#include <esp_hf_ag_api.h>

ESP_HF_BVRA_RESPONSE_EVT.

Public Members

esp_bd_addr_t remote_addr: Remote bluetooth device address

esp_hf_vr_state_t value: Voice recognition state

struct hf_vts_rep_param

#include <esp_hf_ag_api.h>

ESP_HF_VTS_RESPONSE_EVT.

Public Members

char *code: MTF code from HF Client

struct hf_wbs_rep_param

#include <esp_hf_ag_api.h>

ESP_HF_WBS_RESPONSE_EVT.

Public Members

esp_hf_wbs_config_t codec: codec mode CVSD or mSBC

Macros

ESP_HF_PEER_FEAT_3WAY

ESP_HF_PEER_FEAT_ECNR

ESP_HF_PEER_FEAT_VREC

ESP_HF_PEER_FEAT_INBAND

ESP_HF_PEER_FEAT_VTAG

ESP_HF_PEER_FEAT_REJECT

ESP_HF_PEER_FEAT_ECS

ESP_HF_PEER_FEAT_ECC

ESP_HF_PEER_FEAT_EXTERR

ESP_HF_PEER_FEAT_CODEC

ESP_HF_PEER_FEAT_HF_IND

ESP_HF_PEER_FEAT_ESCO_S4

ESP_HF_CHLD_FEAT_REL

ESP_HF_CHLD_FEAT_REL_ACC

ESP_HF_CHLD_FEAT_REL_X

ESP_HF_CHLD_FEAT_HOLD_ACC

ESP_HF_CHLD_FEAT_PRIV_X

ESP_HF_CHLD_FEAT_MERGE

ESP_HF_CHLD_FEAT_MERGE_DETACH

Type Definitions

typedef void (*esp_hf_incoming_data_cb_t)(const uint8_t *buf, uint32_t len)

AG incoming data callback function, the callback is useful in case of Voice Over HCI.

Param buf: [in] : pointer to incoming data(payload of HCI synchronous data packet), the buffer is allocated inside bluetooth protocol stack and will be released after invoke of the callback is finished.
Param len: [in] : size(in bytes) in buf

typedef uint32_t (*esp_hf_outgoing_data_cb_t)(uint8_t *buf, uint32_t len)

AG outgoing data callback function, the callback is useful in case of Voice Over HCI. Once audio connection is set up and the application layer has prepared data to send, the lower layer will call this function to read data and then send. This callback is supposed to be implemented as non-blocking, and if data is not enough, return value 0 is supposed.

Param buf: [in] : pointer to incoming data(payload of HCI synchronous data packet), the buffer is allocated inside bluetooth protocol stack and will be released after invoke of the callback is finished.
Param len: [in] : size(in bytes) in buf
Return: length of data successfully read

typedef void (*esp_hf_cb_t)(esp_hf_cb_event_t event, esp_hf_cb_param_t *param)

HF AG callback function type.

Param event: : Event type
Param param: : Pointer to callback parameter

Enumerations

enum esp_hf_cb_event_t

HF callback events.

Values:

enumerator ESP_HF_CONNECTION_STATE_EVT: Connection state changed event

enumerator ESP_HF_AUDIO_STATE_EVT: Audio connection state change event

enumerator ESP_HF_BVRA_RESPONSE_EVT: Voice recognition state change event

enumerator ESP_HF_VOLUME_CONTROL_EVT: Audio volume control command from HF Client, provided by +VGM or +VGS message

enumerator ESP_HF_UNAT_RESPONSE_EVT: Unknown AT cmd Response

enumerator ESP_HF_IND_UPDATE_EVT: Indicator Update Event

enumerator ESP_HF_CIND_RESPONSE_EVT: Call And Device Indicator Response

enumerator ESP_HF_COPS_RESPONSE_EVT: Current operator information

enumerator ESP_HF_CLCC_RESPONSE_EVT: List of current calls notification

enumerator ESP_HF_CNUM_RESPONSE_EVT: Subscriber information response from HF Client

enumerator ESP_HF_VTS_RESPONSE_EVT: Enable or not DTMF

enumerator ESP_HF_NREC_RESPONSE_EVT: Enable or not NREC

enumerator ESP_HF_ATA_RESPONSE_EVT: Answer an Incoming Call

enumerator ESP_HF_CHUP_RESPONSE_EVT: Reject an Incoming Call

enumerator ESP_HF_DIAL_EVT: Origin an outgoing call with specific number or the dial the last number

enumerator ESP_HF_WBS_RESPONSE_EVT: Codec Status

enumerator ESP_HF_BCS_RESPONSE_EVT: Final Codec Choice

提供有关此文档的反馈