Internal and Unstable APIs
This section is listing some APIs that are internal or likely to be changed or removed in the next releases of ESP-IDF.
API Reference
Header File
Functions
-
int esp_rom_printf(const char *fmt, ...)
Print formated string to console device.
备注
float and long long data are not supported!
- 参数
fmt – Format string
... – Additional arguments, depending on the format string
- 返回
int: Total number of characters written on success; A negative number on failure.
-
void esp_rom_delay_us(uint32_t us)
Pauses execution for us microseconds.
- 参数
us – Number of microseconds to pause
-
void esp_rom_install_channel_putc(int channel, void (*putc)(char c))
esp_rom_printf can print message to different channels simultaneously. This function can help install the low level putc function for esp_rom_printf.
- 参数
channel – Channel number (startting from 1)
putc – Function pointer to the putc implementation. Set NULL can disconnect esp_rom_printf with putc.
-
void esp_rom_install_uart_printf(void)
Install UART1 as the default console channel, equivalent to
esp_rom_install_channel_putc(1, esp_rom_uart_putc)
-
soc_reset_reason_t esp_rom_get_reset_reason(int cpu_no)
Get reset reason of CPU.
- 参数
cpu_no – CPU number
- 返回
Reset reason code (see in soc/reset_reasons.h)
-
void esp_rom_route_intr_matrix(int cpu_core, uint32_t periph_intr_id, uint32_t cpu_intr_num)
Route peripheral interrupt sources to CPU’s interrupt port by matrix.
Usually there’re 4 steps to use an interrupt:
Route peripheral interrupt source to CPU. e.g. esp_rom_route_intr_matrix(0, ETS_WIFI_MAC_INTR_SOURCE, ETS_WMAC_INUM)
Set interrupt handler for CPU
Enable CPU interupt
Enable peripheral interrupt
- 参数
cpu_core – The CPU number, which the peripheral interupt will inform to
periph_intr_id – The peripheral interrupt source number
cpu_intr_num – The CPU interrupt number
-
uint32_t esp_rom_get_cpu_ticks_per_us(void)
Get the real CPU ticks per us.
- 返回
CPU ticks per us