时钟树

[English]

ESP32-H2 的时钟子系统用于从一系列根时钟中提取并分配系统/模块时钟。时钟树驱动程序负责维护系统时钟的基本功能,并管理模块时钟间的复杂关系。

本文档首先介绍了根时钟和模块时钟,随后介绍了可供用户调用的时钟树 API,调用这些 API,可以监测模块时钟的运行状态。

简介

本节列出了 ESP32-H2 支持的根时钟和模块时钟的定义,这些定义通常用于驱动程序配置,有助于为外设选择合适的时钟源。

根时钟

根时钟会产生可靠的时钟信号,经各种门、复用器、分频器或倍频器传递,这些时钟信号最终成为 CPU 内核、Wi-Fi、蓝牙、RTC 及外设等功能模块的时钟源。

ESP32-H2 的根时钟列在 soc_root_clk_t 中:

  • 内部 8 MHz RC 振荡器 (RC_FAST)

    此 RC 振荡器可产生约 8.5 MHz 的时钟信号输出,标识为 RC_FAST_CLK

    在运行时,通过校准,可以计算 RC_FAST_CLK 的实际频率。

  • 外部 32 MHz 晶振 (XTAL)

  • 内部 136 kHz RC 振荡器 (RC_SLOW)

    此 RC 振荡器产生约 136 kHz 的时钟信号输出,标识为 RC_SLOW_CLK。在运行时,通过校准,可以计算该时钟信号的实际频率。

  • 外部 32 kHz 晶振 - 可选 (XTAL32K)

    XTAL32K_CLK 的时钟源可以是连接到 XTAL_32K_PXTAL_32K_N 管脚的 32 kHz 晶振,也可以是外部电路生成的 32 kHZ 时钟信号。如果使用外部电路生成的时钟信号,该信号必须连接到 XTAL_32K_P 管脚。

    通过校准,可以计算 XTAL32K_CLK 的实际频率。

  • 外部慢速时钟 - 可选 (OSC_SLOW)

    将外部电路生成的时钟信号连接到 GPIO13,可作为 RTC_SLOW_CLK 的时钟源。通过校准,可以计算该时钟信号的实际频率。

  • 内部 32 kHz RC 振荡器 (RC32K)

    在运行时,通过校准,可以计算该时钟信号的实际频率。

与晶振产生的信号相比,从 RC 振荡器电路产生的信号通常精度较低,且容易受环境影响。因此,ESP32-H2 为 RTC_SLOW_CLK 提供了几种时钟源选项,可以根据对系统时间精度和对功耗的要求选择。更多详情,请参阅 RTC 定时器时钟源

模块时钟

ESP32-H2 的可用模块时钟在 soc_module_clk_t 中列出,每个模块时钟都有其唯一 ID。查阅文档中的枚举值,即可获取各模块时钟的详细信息。

使用 API

时钟树驱动程序提供了一个一体化接口,可以获取模块时钟的频率,即 esp_clk_tree_src_get_freq_hz()。通过该函数,你可以在任何时刻,通过提供时钟名称 soc_module_clk_t 和指定返回频率值的精度级别 esp_clk_tree_src_freq_precision_t,获取时钟频率。

API 参考

Header File

Macros

SOC_CLK_RC_FAST_FREQ_APPROX

Approximate RC_FAST_CLK frequency in Hz

SOC_CLK_RC_SLOW_FREQ_APPROX

Approximate RC_SLOW_CLK frequency in Hz

SOC_CLK_RC32K_FREQ_APPROX

Approximate RC32K_CLK frequency in Hz

SOC_CLK_XTAL32K_FREQ_APPROX

Approximate XTAL32K_CLK frequency in Hz

SOC_CLK_OSC_SLOW_FREQ_APPROX

Approximate OSC_SLOW_CLK (external slow clock) frequency in Hz

SOC_GPTIMER_CLKS

Array initializer for all supported clock sources of GPTimer.

The following code can be used to iterate all possible clocks:

soc_periph_gptimer_clk_src_t gptimer_clks[] = (soc_periph_gptimer_clk_src_t)SOC_GPTIMER_CLKS;
for (size_t i = 0; i< sizeof(gptimer_clks) / sizeof(gptimer_clks[0]); i++) {
    soc_periph_gptimer_clk_src_t clk = gptimer_clks[i];
    // Test GPTimer with the clock `clk`
}

SOC_RMT_CLKS

Array initializer for all supported clock sources of RMT.

SOC_TEMP_SENSOR_CLKS

Array initializer for all supported clock sources of Temperature Sensor.

SOC_MCPWM_TIMER_CLKS

Array initializer for all supported clock sources of MCPWM Timer.

SOC_MCPWM_CAPTURE_CLKS

Array initializer for all supported clock sources of MCPWM Capture Timer.

SOC_MCPWM_CARRIER_CLKS

Array initializer for all supported clock sources of MCPWM Carrier.

SOC_I2S_CLKS

Array initializer for all supported clock sources of I2S.

SOC_I2C_CLKS

Array initializer for all supported clock sources of I2C.

SOC_SPI_CLKS

Array initializer for all supported clock sources of SPI.

SOC_SDM_CLKS

Array initializer for all supported clock sources of SDM.

SOC_ANA_CMPR_CLKS

Array initializer for all supported clock sources of Analog Comparator.

SOC_GLITCH_FILTER_CLKS

Array initializer for all supported clock sources of Glitch Filter.

SOC_TWAI_CLKS

Array initializer for all supported clock sources of TWAI.

SOC_ADC_DIGI_CLKS

Array initializer for all supported clock sources of ADC digital controller.

SOC_MWDT_CLKS

Array initializer for all supported clock sources of MWDT.

SOC_LEDC_CLKS

Array initializer for all supported clock sources of LEDC.

SOC_PARLIO_CLKS

Array initializer for all supported clock sources of PARLIO.

SOC_MSPI_CLKS

Array initializer for all supported clock sources of MSPI digital controller.

Enumerations

enum soc_root_clk_t

Root clock.

Values:

enumerator SOC_ROOT_CLK_INT_RC_FAST

Internal 8.5MHz RC oscillator

enumerator SOC_ROOT_CLK_INT_RC_SLOW

Internal 136kHz RC oscillator

enumerator SOC_ROOT_CLK_EXT_XTAL

External 32MHz crystal

enumerator SOC_ROOT_CLK_EXT_XTAL32K

External 32kHz crystal/clock signal

enumerator SOC_ROOT_CLK_INT_RC32K

Internal 32kHz RC oscillator

enumerator SOC_ROOT_CLK_EXT_OSC_SLOW

External slow clock signal at pin13

enum soc_cpu_clk_src_t

CPU_CLK mux inputs, which are the supported clock sources for the CPU_CLK.

备注

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_CPU_CLK_SRC_XTAL

Select XTAL_CLK as CPU_CLK source

enumerator SOC_CPU_CLK_SRC_PLL

Select PLL_CLK as CPU_CLK source (PLL_CLK is one of the outputs of 32MHz crystal oscillator frequency multiplier, 96MHz)

enumerator SOC_CPU_CLK_SRC_RC_FAST

Select RC_FAST_CLK as CPU_CLK source

enumerator SOC_CPU_CLK_SRC_FLASH_PLL

Select FLASH_PLL_CLK as CPU_CLK source (FLASH_PLL_CLK is the other output of 32MHz crystal oscillator frequency multiplier, 64MHz)

enumerator SOC_CPU_CLK_SRC_INVALID

Invalid CPU_CLK source

enum soc_rtc_slow_clk_src_t

RTC_SLOW_CLK mux inputs, which are the supported clock sources for the RTC_SLOW_CLK.

备注

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW

Select RC_SLOW_CLK as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_XTAL32K

Select XTAL32K_CLK as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_RC32K

Select RC32K_CLK as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_OSC_SLOW

Select OSC_SLOW_CLK (external slow clock) as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_INVALID

Invalid RTC_SLOW_CLK source

enum soc_rtc_fast_clk_src_t

RTC_FAST_CLK mux inputs, which are the supported clock sources for the RTC_FAST_CLK.

备注

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_RTC_FAST_CLK_SRC_RC_FAST

Select RC_FAST_CLK as RTC_FAST_CLK source

enumerator SOC_RTC_FAST_CLK_SRC_XTAL_D2

Select XTAL_D2_CLK (may referred as XTAL_CLK_DIV_2) as RTC_FAST_CLK source

enumerator SOC_RTC_FAST_CLK_SRC_XTAL_DIV

Alias name for SOC_RTC_FAST_CLK_SRC_XTAL_D2

enumerator SOC_RTC_FAST_CLK_SRC_LP_PLL

Select LP_PLL_CLK as RTC_FAST_CLK source (LP_PLL_CLK is a 8MHz clock sourced from RC32K or XTAL32K)

enumerator SOC_RTC_FAST_CLK_SRC_INVALID

Invalid RTC_FAST_CLK source

enum soc_lp_pll_clk_src_t

LP_PLL_CLK mux inputs, which are the supported clock sources for the LP_PLL_CLK.

备注

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_LP_PLL_CLK_SRC_RC32K

Select RC32K_CLK as LP_PLL_CLK source

enumerator SOC_LP_PLL_CLK_SRC_XTAL32K

Select XTAL32K_CLK as LP_PLL_CLK source

enumerator SOC_LP_PLL_CLK_SRC_INVALID

Invalid LP_PLL_CLK source

enum soc_module_clk_t

Supported clock sources for modules (CPU, peripherals, RTC, etc.)

备注

enum starts from 1, to save 0 for special purpose

Values:

enumerator SOC_MOD_CLK_CPU

CPU_CLK can be sourced from XTAL, PLL, RC_FAST, or PLL2 by configuring soc_cpu_clk_src_t

enumerator SOC_MOD_CLK_RTC_FAST

RTC_FAST_CLK can be sourced from XTAL_D2 or RC_FAST by configuring soc_rtc_fast_clk_src_t

enumerator SOC_MOD_CLK_RTC_SLOW

RTC_SLOW_CLK can be sourced from RC_SLOW, XTAL32K, OSC_SLOW, or RC32K by configuring soc_rtc_slow_clk_src_t

enumerator SOC_MOD_CLK_PLL_F48M

PLL_F48M_CLK is derived from PLL (clock gating + fixed divider of 2), it has a fixed frequency of 48MHz

enumerator SOC_MOD_CLK_PLL_F64M

PLL_F64M_CLK is derived from FLASH_PLL (clock gating), it has a fixed frequency of 64MHz

enumerator SOC_MOD_CLK_PLL_F96M

PLL_F96M_CLK is derived from PLL (clock gating), it has a fixed frequency of 96MHz

enumerator SOC_MOD_CLK_XTAL32K

XTAL32K_CLK comes from the external 32kHz crystal, passing a clock gating to the peripherals

enumerator SOC_MOD_CLK_RC_FAST

RC_FAST_CLK comes from the internal 8MHz rc oscillator, passing a clock gating to the peripherals

enumerator SOC_MOD_CLK_XTAL

XTAL_CLK comes from the external 32MHz crystal

enumerator SOC_MOD_CLK_INVALID

Indication of the end of the available module clock sources

enum soc_periph_systimer_clk_src_t

Type of SYSTIMER clock source.

Values:

enumerator SYSTIMER_CLK_SRC_XTAL

SYSTIMER source clock is XTAL

enumerator SYSTIMER_CLK_SRC_RC_FAST

SYSTIMER source clock is RC_FAST

enumerator SYSTIMER_CLK_SRC_DEFAULT

SYSTIMER source clock default choice is XTAL

enum soc_periph_gptimer_clk_src_t

Type of GPTimer clock source.

Values:

enumerator GPTIMER_CLK_SRC_PLL_F48M

Select PLL_F48M as the source clock

enumerator GPTIMER_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator GPTIMER_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator GPTIMER_CLK_SRC_DEFAULT

Select PLL_F48M as the default choice

enum soc_periph_tg_clk_src_legacy_t

Type of Timer Group clock source, reserved for the legacy timer group driver.

Values:

enumerator TIMER_SRC_CLK_PLL_F48M

Timer group clock source is PLL_F48M

enumerator TIMER_SRC_CLK_XTAL

Timer group clock source is XTAL

enumerator TIMER_SRC_CLK_DEFAULT

Timer group clock source default choice is PLL_F48M

enum soc_periph_rmt_clk_src_t

Type of RMT clock source.

Values:

enumerator RMT_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator RMT_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator RMT_CLK_SRC_DEFAULT

Select XTAL as the default choice

enum soc_periph_rmt_clk_src_legacy_t

Type of RMT clock source, reserved for the legacy RMT driver.

Values:

enumerator RMT_BASECLK_XTAL

RMT source clock is XTAL

enumerator RMT_BASECLK_DEFAULT

RMT source clock default choice is XTAL

enum soc_periph_temperature_sensor_clk_src_t

Type of Temp Sensor clock source.

Values:

enumerator TEMPERATURE_SENSOR_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator TEMPERATURE_SENSOR_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator TEMPERATURE_SENSOR_CLK_SRC_DEFAULT

Select XTAL as the default choice

enum soc_periph_uart_clk_src_legacy_t

Type of UART clock source, reserved for the legacy UART driver.

Values:

enumerator UART_SCLK_PLL_F48M

UART source clock is PLL_F48M

enumerator UART_SCLK_RTC

UART source clock is RC_FAST

enumerator UART_SCLK_XTAL

UART source clock is XTAL

enumerator UART_SCLK_DEFAULT

UART source clock default choice is PLL_F48M

enum soc_periph_mcpwm_timer_clk_src_t

Type of MCPWM timer clock source.

Values:

enumerator MCPWM_TIMER_CLK_SRC_PLL96M

Select PLL_F96M as the source clock

enumerator MCPWM_TIMER_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator MCPWM_TIMER_CLK_SRC_DEFAULT

Select PLL_F96M as the default clock choice

enum soc_periph_mcpwm_capture_clk_src_t

Type of MCPWM capture clock source.

Values:

enumerator MCPWM_CAPTURE_CLK_SRC_PLL96M

Select PLL_F96M as the source clock

enumerator MCPWM_CAPTURE_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator MCPWM_CAPTURE_CLK_SRC_DEFAULT

Select PLL_F96M as the default clock choice

enum soc_periph_mcpwm_carrier_clk_src_t

Type of MCPWM carrier clock source.

Values:

enumerator MCPWM_CARRIER_CLK_SRC_PLL96M

Select PLL_F96M as the source clock

enumerator MCPWM_CARRIER_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator MCPWM_CARRIER_CLK_SRC_DEFAULT

Select PLL_F96M as the default clock choice

enum soc_periph_i2s_clk_src_t

I2S clock source enum.

Values:

enumerator I2S_CLK_SRC_DEFAULT

Select PLL_F96M as the default source clock

enumerator I2S_CLK_SRC_PLL_96M

Select PLL_F96M as the source clock

enumerator I2S_CLK_SRC_PLL_64M

Select PLL_F64M as the source clock

enumerator I2S_CLK_SRC_XTAL

Select XTAL as the source clock

enum soc_periph_i2c_clk_src_t

Type of I2C clock source.

Values:

enumerator I2C_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator I2C_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator I2C_CLK_SRC_DEFAULT

Select XTAL as the default source clock

enum soc_periph_spi_clk_src_t

Type of SPI clock source.

Values:

enumerator SPI_CLK_SRC_DEFAULT

Select PLL_48M as SPI source clock

enumerator SPI_CLK_SRC_PLL_F48M

Select PLL_48M as SPI source clock

enumerator SPI_CLK_SRC_XTAL

Select XTAL as SPI source clock

enumerator SPI_CLK_SRC_RC_FAST

Select RC_FAST as SPI source clock

enum soc_periph_sdm_clk_src_t

Sigma Delta Modulator clock source.

Values:

enumerator SDM_CLK_SRC_XTAL

Select XTAL clock as the source clock

enumerator SDM_CLK_SRC_PLL_F48M

Select PLL_F48M clock as the source clock

enumerator SDM_CLK_SRC_DEFAULT

Select PLL_F48M as the default clock choice

enum soc_periph_ana_cmpr_clk_src_t

Sigma Delta Modulator clock source.

Values:

enumerator ANA_CMPR_CLK_SRC_XTAL

Select XTAL clock as the source clock

enumerator ANA_CMPR_CLK_SRC_PLL_F48M

Select PLL_F48M clock as the source clock

enumerator ANA_CMPR_CLK_SRC_DEFAULT

Select PLL_F48M as the default clock choice

enum soc_periph_glitch_filter_clk_src_t

Glitch filter clock source.

Values:

enumerator GLITCH_FILTER_CLK_SRC_XTAL

Select XTAL clock as the source clock

enumerator GLITCH_FILTER_CLK_SRC_PLL_F48M

Select PLL_F48M clock as the source clock

enumerator GLITCH_FILTER_CLK_SRC_DEFAULT

Select PLL_F48M clock as the default clock choice

enum soc_periph_twai_clk_src_t

TWAI clock source.

Values:

enumerator TWAI_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator TWAI_CLK_SRC_DEFAULT

Select XTAL as the default clock choice

enum soc_periph_adc_digi_clk_src_t

ADC digital controller clock source.

Values:

enumerator ADC_DIGI_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator ADC_DIGI_CLK_SRC_PLL_F96M

Select PLL_F96M as the source clock

enumerator ADC_DIGI_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator ADC_DIGI_CLK_SRC_DEFAULT

Select PLL_F96M as the default clock choice

enum soc_periph_mwdt_clk_src_t

MWDT clock source.

Values:

enumerator MWDT_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator MWDT_CLK_SRC_PLL_F48M

Select PLL fixed 48 MHz as the source clock

enumerator MWDT_CLK_SRC_RC_FAST

Select RTC fast as the source clock

enumerator MWDT_CLK_SRC_DEFAULT

Select PLL as the default clock choice

enum soc_periph_ledc_clk_src_legacy_t

Type of LEDC clock source, reserved for the legacy LEDC driver.

Values:

enumerator LEDC_AUTO_CLK

LEDC source clock will be automatically selected based on the giving resolution and duty parameter when init the timer

enumerator LEDC_USE_PLL_DIV_CLK

Select PLL_F96M clock as the source clock

enumerator LEDC_USE_RC_FAST_CLK

Select RC_FAST as the source clock

enumerator LEDC_USE_XTAL_CLK

Select XTAL as the source clock

enumerator LEDC_USE_RTC8M_CLK

Alias of ‘LEDC_USE_RC_FAST_CLK’

enum soc_periph_parlio_clk_src_t

PARLIO clock source.

Values:

enumerator PARLIO_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator PARLIO_CLK_SRC_PLL_F96M

Select PLL_F96M as the source clock

enumerator PARLIO_CLK_SRC_DEFAULT

Select PLL_F96M as the default clock choice

enum soc_periph_mspi_clk_src_t

MSPI digital controller clock source.

Values:

enumerator MSPI_CLK_SRC_XTAL

Select XTAL as the source clock

enumerator MSPI_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator MSPI_CLK_SRC_PLL_F64M

Select PLL_F64M as the source clock

enumerator MSPI_CLK_SRC_PLL_F48M

Select PLL_F48M as the source clock

enumerator MSPI_CLK_SRC_DEFAULT

Select PLL_F64M as the default clock choice

enumerator MSPI_CLK_SRC_ROM_DEFAULT

Select XTAL as ROM default clock source

Header File

Functions

esp_err_t esp_clk_tree_src_get_freq_hz(soc_module_clk_t clk_src, esp_clk_tree_src_freq_precision_t precision, uint32_t *freq_value)

Get frequency of module clock source.

参数
  • clk_src[in] Clock source available to modules, in soc_module_clk_t

  • precision[in] Degree of precision, one of esp_clk_tree_src_freq_precision_t values This arg only applies to the clock sources that their frequencies can vary: SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_RTC_SLOW, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_RC_FAST_D256, SOC_MOD_CLK_XTAL32K For other clock sources, this field is ignored.

  • freq_value[out] Frequency of the clock source, in Hz

返回

  • ESP_OK Success

  • ESP_ERR_INVALID_ARG Parameter error

  • ESP_FAIL Calibration failed

Enumerations

enum esp_clk_tree_src_freq_precision_t

Degree of precision of frequency value to be returned by esp_clk_tree_src_get_freq_hz()

Values:

enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_APPROX
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_EXACT
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_INVALID