2.2. Setting up the Local OTA Server

This document contains instructions on setting up a self-signed HTTPS OTA server on the local host and configuring the Border Router to trust the server.

Generating the Server Certificate

Create a new directory ota_server_storage to host the server. Then generate the certificate in this directory:

mkdir ota_server_storage && cd ota_server_storage

openssl req -x509 -newkey rsa:2048 -keyout ca_key.pem -out ca_cert.pem -days 365 -nodes

Note that when prompted for the Common Name (CN), the name entered shall match the hostname running the server.

The Border Router OTA image will be automatically generated when building the basic_thread_border_router example. Copy it to the previously created directory ota_server_storage:

cp esp-thread-br/examples/basic_thread_border_router/build/ota_with_rcp_image ota_server_storage

Rebuilding the Border Router Firmware with the New Certificate

The certificate server_certs/ca_cert.pem in the basic_thread_border_router example shall be replaced with the generated certificate. Perform a fullclean and build the application again:

cp path/to/ota_server_storage/ca_cert.pem server_certs/ca_cert.pem

idf.py fullclean

idf.py flash monitor

To download the image from the server and run the following command on the Border Router:

ota download https://${HOST_URL}:8070/ota_with_rcp_image