esp_hal/rtc_cntl/rtc/
esp32s2.rs

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
use strum::FromRepr;

use crate::{
    clock::XtalClock,
    peripherals::LPWR,
    rtc_cntl::{RtcCalSel, RtcClock, RtcFastClock, RtcSlowClock},
};

pub(crate) fn init() {}

pub(crate) fn configure_clock() {
    assert!(matches!(RtcClock::xtal_freq(), XtalClock::_40M));

    RtcClock::set_fast_freq(RtcFastClock::RtcFastClock8m);

    let cal_val = loop {
        RtcClock::set_slow_freq(RtcSlowClock::RtcSlowClockRtc);

        let res = RtcClock::calibrate(RtcCalSel::RtcCalRtcMux, 1024);
        if res != 0 {
            break res;
        }
    };

    LPWR::regs().store1().write(|w| unsafe { w.bits(cal_val) });
}

// Terminology:
//
// CPU Reset:    Reset CPU core only, once reset done, CPU will execute from
//               reset vector
// Core Reset:   Reset the whole digital system except RTC sub-system
// System Reset: Reset the whole digital system, including RTC sub-system
// Chip Reset:   Reset the whole chip, including the analog part

/// SOC Reset Reason.
#[derive(Debug, Clone, Copy, PartialEq, Eq, FromRepr)]
pub enum SocResetReason {
    /// Power on reset
    ///
    /// In ESP-IDF this value (0x01) can *also* be `ChipBrownOut` or
    /// `ChipSuperWdt`, however that is not really compatible with Rust-style
    /// enums.
    ChipPowerOn   = 0x01,
    /// Software resets the digital core by RTC_CNTL_SW_SYS_RST
    CoreSw        = 0x03,
    /// Deep sleep reset the digital core
    CoreDeepSleep = 0x05,
    /// Main watch dog 0 resets digital core
    CoreMwdt0     = 0x07,
    /// Main watch dog 1 resets digital core
    CoreMwdt1     = 0x08,
    /// RTC watch dog resets digital core
    CoreRtcWdt    = 0x09,
    /// Main watch dog 0 resets CPU 0
    Cpu0Mwdt0     = 0x0B,
    /// Software resets CPU 0 by RTC_CNTL_SW_PROCPU_RST
    Cpu0Sw        = 0x0C,
    /// RTC watch dog resets CPU 0
    Cpu0RtcWdt    = 0x0D,
    /// VDD voltage is not stable and resets the digital core
    SysBrownOut   = 0x0F,
    /// RTC watch dog resets digital core and rtc module
    SysRtcWdt     = 0x10,
    /// Main watch dog 1 resets CPU 0
    Cpu0Mwdt1     = 0x11,
    /// Super watch dog resets the digital core and rtc module
    SysSuperWdt   = 0x12,
    /// Glitch on clock resets the digital core and rtc module
    SysClkGlitch  = 0x13,
    /// eFuse CRC error resets the digital core
    CoreEfuseCrc  = 0x14,
}