[ESP8266 Only] Signaling Test AT Commands¶
AT+FACTPLCP: Send with long or short PLCP (Physical Layer Convergence Procedure)
[ESP8266 Only] AT+FACTPLCP: Send with Long or Short PLCP¶
Set Command¶
Command:
AT+FACTPLCP=<enable>,<tx_with_long>
Response:
OK
Parameters¶
<enable>: Enable or disable manual configuration.
0: Disable manual configuration. The default value for the parameter
<tx_with_long>will be used.1: Enable manual configuration. The type of PLCP that AT sends depends on
<tx_with_long>.
<tx_with_long>: Send with long PLCP or short PLCP.
0: Send with short PLCP (default).
1: Send with long PLCP.