Revision History
Date |
Version |
Release Notes |
|---|---|---|
2024-08-19 |
v1.2 |
|
2024-02-27 |
v1.1 |
|
2022-09-19 |
v1.0 |
First release |
[TOUCH-99] The Scan Done Interrupt RTC_CNTL_TOUCH_SCAN_DONE_INT_ENA Occurs Twice During a Single Scan
Description
The touch sensor of ESP32-S2 triggered the scan done interrupt RTC_CNTL_TOUCH_SCAN_DONE_INT_ENA twice during a single scan, occurring when scanning the last two channels.
Workarounds
Users are suggested to register one more interrupt in the RTC driver to filter, checking if the current measuring channel is the last channel. If it is not the last channel, then clear the RTC_CNTL_TOUCH_SCAN_DONE_INT_ENA interrupt directly. If it is, then the current RTC_CNTL_TOUCH_SCAN_DONE_INT_ENA interrupt can be regarded as a valid interrupt. This issue has been bypassed in all versions of ESP-IDF through this method.
Solution
No fix scheduled.
[TOUCH-100] The TOUCH_SCAN_DONE_INT Interrupt Raw Data Value Is Undefined
Description
For ESP32-S2’s touch sensor, the raw data value is undefined for the first two TOUCH_SCAN_DONE_INT interrupts.
Workarounds
Users are suggested to skip the first two TOUCH_SCAN_DONE_INT interrupts, then turn them off and stop using them.
This issue has been bypassed in all versions of ESP-IDF through this method.
This issue has been bypassed in the Touch Element component (touch_element) in ESP-IDF (introduced in ESP-IDF release version v4.3). If you are directly developing on the lower-level touch sensor driver, please follow the implementation provided within the Touch Element component and the recommendations mentioned above to bypass the issue.
Solution
No fix scheduled.
[RTC-126] RTC Register Read Error After Wake-up from Light-sleep Mode
Description
If an RTC peripheral is turned off in Light-sleep mode, there is a certain probability that after waking up from Light-sleep, the CPU of ESP32-S2 will read the registers in the RTC power domain incorrectly.
Workarounds
Users are suggested not to power down RTC peripherals in Light-sleep mode. There will be no impact on power consumption.
Solution
No fix scheduled.