Deep Sleep Wake Stubs
ESP32-H2 supports running a "deep sleep wake stub" when coming out of deep sleep. This function runs immediately as soon as the chip wakes up - before any normal initialisation, bootloader, or ESP-IDF code has run. After the wake stub runs, the SoC can go back to sleep or continue to start ESP-IDF normally.
Deep sleep wake stub code is loaded into "RTC Fast Memory" and any data which it uses must also be loaded into RTC memory. RTC memory regions hold their contents during deep sleep.
Rules for Wake Stubs
Wake stub code must be carefully written:
As the SoC has freshly woken from sleep, most of the peripherals are in reset states. The SPI flash is unmapped.
The wake stub code can only call functions implemented in ROM or loaded into RTC Fast Memory (see below.)
The wake stub code can only access data loaded in RTC memory. All other RAM will be unintiailised and have random contents. The wake stub can use other RAM for temporary storage, but the contents will be overwritten when the SoC goes back to sleep or starts ESP-IDF.
RTC memory must include any read-only data (.rodata) used by the stub.
Data in RTC memory is initialised whenever the SoC restarts, except when waking from deep sleep. When waking from deep sleep, the values which were present before going to sleep are kept.
Wake stub code is a part of the main esp-idf app. During normal running of esp-idf, functions can call the wake stub functions or access RTC memory. It is as if these were regular parts of the app.
Implementing A Stub
The wake stub in esp-idf is called esp_wake_deep_sleep(). This function runs whenever the SoC wakes from deep sleep. There is a default version of this function provided in esp-idf, but the default function is weak-linked so if your app contains a function named esp_wake_deep_sleep() then this will override the default.
If supplying a custom wake stub, the first thing it does should be to call esp_default_wake_deep_sleep().
It is not necessary to implement esp_wake_deep_sleep() in your app in order to use deep sleep. It is only necessary if you want to have special behaviour immediately on wake.
If you want to swap between different deep sleep stubs at runtime, it is also possible to do this by calling the esp_set_deep_sleep_wake_stub() function. This is not necessary if you only use the default esp_wake_deep_sleep() function.
All of these functions are declared in the esp_sleep.h header under components/esp32h2.
Loading Code Into RTC Memory
Wake stub code must be resident in RTC Fast Memory. This can be done in one of two ways.
The first way is to use the RTC_IRAM_ATTR attribute to place a function into RTC memory:
void RTC_IRAM_ATTR esp_wake_deep_sleep(void) {
esp_default_wake_deep_sleep();
// Add additional functionality here
}
The second way is to place the function into any source file whose name starts with rtc_wake_stub. Files names rtc_wake_stub* have their contents automatically put into RTC memory by the linker.
The first way is simpler for very short and simple code, or for source files where you want to mix "normal" and "RTC" code. The second way is simpler when you want to write longer pieces of code for RTC memory.
Loading Data Into RTC Memory
Data used by stub code must be resident in RTC memory.
Specifying this data can be done in one of two ways:
The first way is to use the RTC_DATA_ATTR and RTC_RODATA_ATTR to specify any data (writeable or read-only, respectively) which should be loaded into RTC memory:
RTC_DATA_ATTR int wake_count;
void RTC_IRAM_ATTR esp_wake_deep_sleep(void) {
esp_default_wake_deep_sleep();
static RTC_RODATA_ATTR const char fmt_str[] = "Wake count %d\n";
esp_rom_printf(fmt_str, wake_count++);
}
The attributes RTC_FAST_ATTR and RTC_SLOW_ATTR can be used to specify data that will be force placed into RTC_FAST and RTC_SLOW memory respectively, but for ESP32-H2 there is only RTC fast memory, so both attributes will map to this region.
Unfortunately, any string constants used in this way must be declared as arrays and marked with RTC_RODATA_ATTR, as shown in the example above.
The second way is to place the data into any source file whose name starts with rtc_wake_stub.
For example, the equivalent example in rtc_wake_stub_counter.c:
int wake_count;
void RTC_IRAM_ATTR esp_wake_deep_sleep(void) {
esp_default_wake_deep_sleep();
esp_rom_printf("Wake count %d\n", wake_count++);
}
The second way is a better option if you need to use strings, or write other more complex code.
To reduce wake-up time use the CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP Kconfig option, see more information in Fast boot from Deep Sleep.
CRC Check For Wake Stubs
During deep sleep, only the wake stubs area of RTC Fast memory is validated with CRC. When ESP32-H2 wakes up from deep sleep, the wake stubs area is validated again. If the validation passes, the wake stubs code will be executed. Otherwise, the normal initialization, bootloader, and esp-idf codes will be executed.
Note
When the CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP option is enabled, all the RTC fast memory except the wake stubs area is added to the heap.
Example
ESP-IDF provides an example to show how to implement the Deep-sleep wake stub.