Clock Tree

[中文]

The clock subsystem of ESP32 is used to source and distribute system/module clocks from a range of root clocks. The clock tree driver maintains the basic functionality of the system clock and the intricate relationship among module clocks.

This document starts with the introduction to root and module clocks. Then it covers the clock tree APIs that can be called to monitor the status of the module clocks at runtime.

Introduction

This section lists definitions of ESP32's supported root clocks and module clocks. These definitions are commonly used in the driver configuration, to help select a proper source clock for the peripheral.

Root Clocks

Root clocks generate reliable clock signals. These clock signals then pass through various gates, muxes, dividers, or multipliers to become the clock sources for every functional module: the CPU core(s), Wi-Fi, Bluetooth, the RTC, and the peripherals.

ESP32's root clocks are listed in soc_root_clk_t:

  • Internal 8 MHz RC Oscillator (RC_FAST)

    This RC oscillator generates a about 8.5 MHz clock signal output as the RC_FAST_CLK.

    The about 8.5 MHz signal output is also passed into a configurable divider, which by default divides the input clock frequency by 256, to generate a RC_FAST_D256_CLK.

    The exact frequency of RC_FAST_CLK can be computed in runtime through calibration on the RC_FAST_D256_CLK.

  • External 2 ~ 40 MHz Crystal (XTAL)

  • Internal 150 kHz RC Oscillator (RC_SLOW)

    This RC oscillator generates a about 150kHz clock signal output as the RC_SLOW_CLK. The exact frequency of this clock can be computed in runtime through calibration.

  • External 32 kHz Crystal - optional (XTAL32K)

    The clock source for this XTAL32K_CLK can be either a 32 kHz crystal connecting to the 32K_XP and 32K_XN pins or a 32 kHz clock signal generated by an external circuit. The external signal must be connected to the 32K_XN pin. Additionally, a 1 nF capacitor must be placed between the 32K_XP pin and ground. In this case, the 32K_XP pin cannot be used as a GPIO pin.

    XTAL32K_CLK can also be calibrated to get its exact frequency.

Typically, the frequency of the signal generated from an RC oscillator circuit is less accurate and more sensitive to the environment compared to the signal generated from a crystal. ESP32 provides several clock source options for the RTC_SLOW_CLK, and it is possible to make the choice based on the requirements for system time accuracy and power consumption. For more details, please refer to RTC Timer Clock Sources.

Module Clocks

ESP32's available module clocks are listed in soc_module_clk_t. Each module clock has a unique ID. You can get more information on each clock by checking the documented enum value.

API Usage

The clock tree driver provides an all-in-one API to get the frequency of the module clocks, esp_clk_tree_src_get_freq_hz(). This function allows you to obtain the clock frequency at any time by providing the clock name soc_module_clk_t and specifying the desired precision level for the returned frequency value esp_clk_tree_src_freq_precision_t.

API Reference

Header File

Macros

SOC_CLK_RC_FAST_FREQ_APPROX

Approximate RC_FAST_CLK frequency in Hz

SOC_CLK_RC_SLOW_FREQ_APPROX

Approximate RC_SLOW_CLK frequency in Hz

SOC_CLK_RC_FAST_D256_FREQ_APPROX

Approximate RC_FAST_D256_CLK frequency in Hz

SOC_CLK_XTAL32K_FREQ_APPROX

Approximate XTAL32K_CLK frequency in Hz

SOC_GPTIMER_CLKS

Array initializer for all supported clock sources of GPTimer.

The following code can be used to iterate all possible clocks:

soc_periph_gptimer_clk_src_t gptimer_clks[] = (soc_periph_gptimer_clk_src_t)SOC_GPTIMER_CLKS;
for (size_t i = 0; i< sizeof(gptimer_clks) / sizeof(gptimer_clks[0]); i++) {
    soc_periph_gptimer_clk_src_t clk = gptimer_clks[i];
// Test GPTimer with the clock `clk`
}

SOC_LCD_CLKS

Array initializer for all supported clock sources of LCD.

SOC_RMT_CLKS

Array initializer for all supported clock sources of RMT.

SOC_MCPWM_TIMER_CLKS

Array initializer for all supported clock sources of MCPWM Timer.

SOC_MCPWM_CAPTURE_CLKS

Array initializer for all supported clock sources of MCPWM Capture Timer.

SOC_MCPWM_CARRIER_CLKS

Array initializer for all supported clock sources of MCPWM Carrier.

SOC_I2S_CLKS

Array initializer for all supported clock sources of I2S.

SOC_I2C_CLKS

Array initializer for all supported clock sources of I2C.

SOC_SPI_CLKS

Array initializer for all supported clock sources of SPI.

SOC_SDM_CLKS

Array initializer for all supported clock sources of SDM.

SOC_DAC_DIGI_CLKS

Array initializer for all supported clock sources of DAC digital controller.

SOC_DAC_COSINE_CLKS

Array initializer for all supported clock sources of DAC cosine wave generator.

SOC_TWAI_CLKS

Array initializer for all supported clock sources of TWAI.

SOC_ADC_DIGI_CLKS

Array initializer for all supported clock sources of ADC digital controller.

SOC_ADC_RTC_CLKS

Array initializer for all supported clock sources of ADC RTC controller.

SOC_MWDT_CLKS

Array initializer for all supported clock sources of MWDT.

SOC_LEDC_CLKS

Array initializer for all supported clock sources of LEDC.

SOC_SDMMC_CLKS

Array initializer for all supported clock sources of SDMMC.

Enumerations

enum soc_root_clk_t

Root clock.

Values:

enumerator SOC_ROOT_CLK_INT_RC_FAST

Internal 8MHz RC oscillator

enumerator SOC_ROOT_CLK_INT_RC_SLOW

Internal 150kHz RC oscillator

enumerator SOC_ROOT_CLK_EXT_XTAL

External 2~40MHz crystal

enumerator SOC_ROOT_CLK_EXT_XTAL32K

External 32kHz crystal/clock signal

enum soc_cpu_clk_src_t

CPU_CLK mux inputs, which are the supported clock sources for the CPU_CLK.

Note

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_CPU_CLK_SRC_XTAL

Select XTAL_CLK as CPU_CLK source

enumerator SOC_CPU_CLK_SRC_PLL

Select PLL_CLK as CPU_CLK source (PLL_CLK is the output of 40MHz crystal oscillator frequency multiplier, can be 480MHz or 320MHz)

enumerator SOC_CPU_CLK_SRC_RC_FAST

Select RC_FAST_CLK as CPU_CLK source

enumerator SOC_CPU_CLK_SRC_APLL

Select APLL_CLK as CPU_CLK source

enumerator SOC_CPU_CLK_SRC_INVALID

Invalid CPU_CLK source

enum soc_rtc_slow_clk_src_t

RTC_SLOW_CLK mux inputs, which are the supported clock sources for the RTC_SLOW_CLK.

Note

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW

Select RC_SLOW_CLK as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_XTAL32K

Select XTAL32K_CLK as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256

Select RC_FAST_D256_CLK (referred as FOSC_DIV or 8m_d256/8md256 in TRM and reg. description) as RTC_SLOW_CLK source

enumerator SOC_RTC_SLOW_CLK_SRC_INVALID

Invalid RTC_SLOW_CLK source

enum soc_rtc_fast_clk_src_t

RTC_FAST_CLK mux inputs, which are the supported clock sources for the RTC_FAST_CLK.

Note

Enum values are matched with the register field values on purpose

Values:

enumerator SOC_RTC_FAST_CLK_SRC_XTAL_D4

Select XTAL_D4_CLK (may referred as XTAL_CLK_DIV_4) as RTC_FAST_CLK source

enumerator SOC_RTC_FAST_CLK_SRC_XTAL_DIV

Alias name for SOC_RTC_FAST_CLK_SRC_XTAL_D4

enumerator SOC_RTC_FAST_CLK_SRC_RC_FAST

Select RC_FAST_CLK as RTC_FAST_CLK source

enumerator SOC_RTC_FAST_CLK_SRC_INVALID

Invalid RTC_FAST_CLK source

enum soc_module_clk_t

Supported clock sources for modules (CPU, peripherals, RTC, etc.)

Note

enum starts from 1, to save 0 for special purpose

Values:

enumerator SOC_MOD_CLK_CPU

CPU_CLK can be sourced from XTAL, PLL, RC_FAST, or APLL by configuring soc_cpu_clk_src_t

enumerator SOC_MOD_CLK_RTC_FAST

RTC_FAST_CLK can be sourced from XTAL_D4 or RC_FAST by configuring soc_rtc_fast_clk_src_t

enumerator SOC_MOD_CLK_RTC_SLOW

RTC_SLOW_CLK can be sourced from RC_SLOW, XTAL32K, or RC_FAST_D256 by configuring soc_rtc_slow_clk_src_t

enumerator SOC_MOD_CLK_APB

APB_CLK is highly dependent on the CPU_CLK source

enumerator SOC_MOD_CLK_PLL_D2

PLL_D2_CLK is derived from PLL, it has a fixed divider of 2

enumerator SOC_MOD_CLK_PLL_F160M

PLL_F160M_CLK is derived from PLL, and has a fixed frequency of 160MHz

enumerator SOC_MOD_CLK_XTAL32K

XTAL32K_CLK comes from the external 32kHz crystal, passing a clock gating to the peripherals

enumerator SOC_MOD_CLK_RC_FAST

RC_FAST_CLK comes from the internal 8MHz rc oscillator, passing a clock gating to the peripherals

enumerator SOC_MOD_CLK_RC_FAST_D256

RC_FAST_D256_CLK comes from the internal 8MHz rc oscillator, divided by 256, and passing a clock gating to the peripherals

enumerator SOC_MOD_CLK_XTAL

XTAL_CLK comes from the external crystal (2~40MHz)

enumerator SOC_MOD_CLK_REF_TICK

REF_TICK is derived from APB, it has a fixed frequency of 1MHz even when APB frequency changes

enumerator SOC_MOD_CLK_APLL

APLL is sourced from PLL, and its frequency is configurable through APLL configuration registers

enumerator SOC_MOD_CLK_INVALID

Indication of the end of the available module clock sources

enum soc_periph_systimer_clk_src_t

Type of SYSTIMER clock source.

Values:

enumerator SYSTIMER_CLK_SRC_XTAL

SYSTIMER source clock is XTAL

enumerator SYSTIMER_CLK_SRC_DEFAULT

SYSTIMER source clock default choice is XTAL

enum soc_periph_gptimer_clk_src_t

Type of GPTimer clock source.

Values:

enumerator GPTIMER_CLK_SRC_APB

Select APB as the source clock

enumerator GPTIMER_CLK_SRC_DEFAULT

Select APB as the default choice

enum soc_periph_tg_clk_src_legacy_t

Type of Timer Group clock source, reserved for the legacy timer group driver.

Values:

enumerator TIMER_SRC_CLK_APB

Timer group source clock is APB

enumerator TIMER_SRC_CLK_DEFAULT

Timer group source clock default choice is APB

enum soc_periph_lcd_clk_src_t

Type of LCD clock source.

Values:

enumerator LCD_CLK_SRC_PLL160M

Select PLL_160M as the source clock

enumerator LCD_CLK_SRC_DEFAULT

Select PLL_160M as the default choice

enum soc_periph_rmt_clk_src_t

Type of RMT clock source.

Values:

enumerator RMT_CLK_SRC_APB

Select APB as the source clock

enumerator RMT_CLK_SRC_REF_TICK

Select REF_TICK as the source clock

enumerator RMT_CLK_SRC_DEFAULT

Select APB as the default choice

enum soc_periph_rmt_clk_src_legacy_t

Type of RMT clock source, reserved for the legacy RMT driver.

Values:

enumerator RMT_BASECLK_APB

RMT source clock is APB CLK

enumerator RMT_BASECLK_REF

RMT source clock is REF_TICK

enumerator RMT_BASECLK_DEFAULT

RMT source clock default choice is APB

enum soc_periph_uart_clk_src_legacy_t

Type of UART clock source, reserved for the legacy UART driver.

Values:

enumerator UART_SCLK_APB

UART source clock is APB CLK

enumerator UART_SCLK_REF_TICK

UART source clock is REF_TICK

enumerator UART_SCLK_DEFAULT

UART source clock default choice is APB

enum soc_periph_mcpwm_timer_clk_src_t

Type of MCPWM timer clock source.

Values:

enumerator MCPWM_TIMER_CLK_SRC_PLL160M

Select PLL_F160M as the source clock

enumerator MCPWM_TIMER_CLK_SRC_DEFAULT

Select PLL_F160M as the default clock choice

enum soc_periph_mcpwm_capture_clk_src_t

Type of MCPWM capture clock source.

Values:

enumerator MCPWM_CAPTURE_CLK_SRC_APB

Select APB as the source clock

enumerator MCPWM_CAPTURE_CLK_SRC_DEFAULT

Select APB as the default clock choice

enum soc_periph_mcpwm_carrier_clk_src_t

Type of MCPWM carrier clock source.

Values:

enumerator MCPWM_CARRIER_CLK_SRC_PLL160M

Select PLL_F160M as the source clock

enumerator MCPWM_CARRIER_CLK_SRC_DEFAULT

Select PLL_F160M as the default clock choice

enum soc_periph_i2s_clk_src_t

I2S clock source enum.

Values:

enumerator I2S_CLK_SRC_DEFAULT

Select PLL_F160M as the default source clock

enumerator I2S_CLK_SRC_PLL_160M

Select PLL_F160M as the source clock

enumerator I2S_CLK_SRC_APLL

Select APLL as the source clock

enum soc_periph_i2c_clk_src_t

Type of I2C clock source.

Values:

enumerator I2C_CLK_SRC_APB
enumerator I2C_CLK_SRC_DEFAULT
enum soc_periph_spi_clk_src_t

Type of SPI clock source.

Values:

enumerator SPI_CLK_SRC_DEFAULT

Select APB as SPI source clock

enumerator SPI_CLK_SRC_APB

Select APB as SPI source clock

enum soc_periph_sdm_clk_src_t

Sigma Delta Modulator clock source.

Values:

enumerator SDM_CLK_SRC_APB

Select APB as the source clock

enumerator SDM_CLK_SRC_DEFAULT

Select APB as the default clock choice

enum soc_periph_dac_digi_clk_src_t

DAC digital controller clock source.

Values:

enumerator DAC_DIGI_CLK_SRC_PLLD2

Select PLL_D2 as the source clock

enumerator DAC_DIGI_CLK_SRC_APLL

Select APLL as the source clock

enumerator DAC_DIGI_CLK_SRC_DEFAULT

Select PLL_D2 as the default source clock

enum soc_periph_dac_cosine_clk_src_t

DAC cosine wave generator clock source.

Values:

enumerator DAC_COSINE_CLK_SRC_RTC_FAST

Select RTC FAST as the source clock

enumerator DAC_COSINE_CLK_SRC_DEFAULT

Select RTC FAST as the default source clock

enum soc_periph_twai_clk_src_t

TWAI clock source.

Values:

enumerator TWAI_CLK_SRC_APB

Select APB as the source clock

enumerator TWAI_CLK_SRC_DEFAULT

Select APB as the default clock choice

enum soc_periph_adc_digi_clk_src_t

ADC digital controller clock source.

Note

ADC DMA mode is clocked from I2S on ESP32, using ADC_DIGI_ here for compatibility Its clock source is same as I2S

Values:

enumerator ADC_DIGI_CLK_SRC_PLL_F160M

Select F160M as the source clock

enumerator ADC_DIGI_CLK_SRC_APLL

Select APLL as the source clock

enumerator ADC_DIGI_CLK_SRC_DEFAULT

Select F160M as the default clock choice

enum soc_periph_adc_rtc_clk_src_t

ADC RTC controller clock source.

Values:

enumerator ADC_RTC_CLK_SRC_RC_FAST

Select RC_FAST as the source clock

enumerator ADC_RTC_CLK_SRC_DEFAULT

Select RC_FAST as the default clock choice

enum soc_periph_mwdt_clk_src_t

MWDT clock source.

Values:

enumerator MWDT_CLK_SRC_APB

Select APB as the source clock

enumerator MWDT_CLK_SRC_DEFAULT

Select APB as the default clock choice

enum soc_periph_ledc_clk_src_legacy_t

Type of LEDC clock source, reserved for the legacy LEDC driver.

Values:

enumerator LEDC_AUTO_CLK

LEDC source clock will be automatically selected based on the giving resolution and duty parameter when init the timer

enumerator LEDC_USE_APB_CLK

Select APB as the source clock

enumerator LEDC_USE_RC_FAST_CLK

Select RC_FAST as the source clock

enumerator LEDC_USE_REF_TICK

Select REF_TICK as the source clock

enumerator LEDC_USE_RTC8M_CLK

Alias of 'LEDC_USE_RC_FAST_CLK'

enum soc_periph_sdmmc_clk_src_t

Type of SDMMC clock source.

Values:

enumerator SDMMC_CLK_SRC_DEFAULT

Select PLL_160M as the default choice

enumerator SDMMC_CLK_SRC_PLL160M

Select PLL_160M as the source clock

enum soc_clkout_sig_id_t

Values:

enumerator CLKOUT_SIG_I2S0

I2S0 clock, depends on the i2s driver configuration

enumerator CLKOUT_SIG_PLL

PLL_CLK is the output of crystal oscillator frequency multiplier

enumerator CLKOUT_SIG_RC_SLOW

RC slow clock, depends on the RTC_CLK_SRC configuration

enumerator CLKOUT_SIG_XTAL

Main crystal oscillator clock

enumerator CLKOUT_SIG_APLL

Divided by PLL, frequency is configurable

enumerator CLKOUT_SIG_REF_TICK

Divided by APB clock, usually be 1MHz

enumerator CLKOUT_SIG_PLL_F80M

From PLL, usually be 80MHz

enumerator CLKOUT_SIG_RC_FAST

RC fast clock, about 8MHz

enumerator CLKOUT_SIG_I2S1

I2S1 clock, depends on the i2s driver configuration

enumerator CLKOUT_SIG_INVALID

Header File

Functions

esp_err_t esp_clk_tree_src_get_freq_hz(soc_module_clk_t clk_src, esp_clk_tree_src_freq_precision_t precision, uint32_t *freq_value)

Get frequency of module clock source.

Parameters
  • clk_src -- [in] Clock source available to modules, in soc_module_clk_t

  • precision -- [in] Degree of precision, one of esp_clk_tree_src_freq_precision_t values This arg only applies to the clock sources that their frequencies can vary: SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_RTC_SLOW, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_RC_FAST_D256, SOC_MOD_CLK_XTAL32K For other clock sources, this field is ignored.

  • freq_value -- [out] Frequency of the clock source, in Hz

Returns

  • ESP_OK Success

  • ESP_ERR_INVALID_ARG Parameter error

  • ESP_FAIL Calibration failed

Enumerations

enum esp_clk_tree_src_freq_precision_t

Degree of precision of frequency value to be returned by esp_clk_tree_src_get_freq_hz()

Values:

enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_APPROX
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_EXACT
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_INVALID