Documenting Code

[中文]

The purpose of this description is to provide a quick summary of the documentation style used in espressif/esp-idf repository and how to add new documentation.

Introduction

When documenting code for this repository, please follow Doxygen style. You are doing it by inserting special commands, for instance @param, into standard comments blocks, for example:

/**
 * @param ratio this is oxygen to air ratio
 */

Doxygen can phrase the code, extract the commands together with subsequent text, and build documentation out of it.

Typical comment block, that contains documentation of a function, looks like below:

Sample inline code documentation

Doxygen supports a couple of formatting styles. It also gives you great flexibility on the level of details to include in documentation. To get familiar with available features, please check data-rich and very well-organized Doxygen Manual.

Why We Need Doxygen?

The ultimate goal is to ensure that all the code is consistently documented, so we can use tools like Sphinx and Breathe to aid preparation and automatic updates of API documentation when the code changes.

With these tools, the above piece of code renders like below:

Sample inline code after rendering

Go for It!

When writing code for this repository, please follow guidelines below:

  1. Document all building blocks of code, including functions, structs, typedefs, enums, macros, etc. Provide enough information about purpose, functionality, and limitations of documented items, as you would like to see them documented when reading the code by others.

  2. Documentation of function should describe what this function does. If it accepts input parameters and returns some value, all of them should be explained.

  3. Do not add a data type before parameter or any other characters besides spaces. All spaces and line breaks are compressed into a single space. If you like to break a line, then break it twice.

    Sample function documented inline and after rendering
  4. If function has void input or does not return any value, then skip @param or @return.

    Sample void function documented inline and after rendering
  5. When documenting a define as well as members of a struct or enum, place specific comment like below after each member.

    Sample of member documentation inline and after rendering
  6. To provide well-formatted lists, break the line after command (like @return in the example below).

    *
    * @return
    *    - ESP_OK if erase operation was successful
    *    - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
    *    - ESP_ERR_NVS_READ_ONLY if handle was opened as read only
    *    - ESP_ERR_NVS_NOT_FOUND if the requested key does not exist
    *    - other error codes from the underlying storage driver
    *
    
  7. Overview of functionality of documented header file, or group of files that make a library, should be placed in a separate README.rst file of the same directory. If this directory contains header files for different APIs, then the file name should be apiname-readme.rst.

Go One Extra Mile

Here are a couple of tips on how you can make your documentation even better and more useful to the reader and writer.

When writing code, please follow the guidelines below:

  1. Add code snippets to illustrate implementation. To do so, enclose snippet using @code{c} and @endcode commands.

    *
    * @code{c}
    * // Example of using nvs_get_i32:
    * int32_t max_buffer_size = 4096; // default value
    * esp_err_t err = nvs_get_i32(my_handle, "max_buffer_size", &max_buffer_size);
    * assert(err == ESP_OK || err == ESP_ERR_NVS_NOT_FOUND);
    * // if ESP_ERR_NVS_NOT_FOUND was returned, max_buffer_size will still
    * // have its default value.
    * @endcode
    *
    

    The code snippet should be enclosed in a comment block of the function that it illustrates.

  2. To highlight some important information use command @attention or @note.

    *
    * @attention
    *     1. This API only impact WIFI_MODE_STA or WIFI_MODE_APSTA mode
    *     2. If the ESP32 is connected to an AP, call esp_wifi_disconnect to disconnect.
    *
    

    Above example also shows how to use a numbered list.

  3. To provide common description to a group of similar functions, enclose them using /**@{*/ and /**@}*/ markup commands.

    /**@{*/
    /**
     * @brief common description of similar functions
     *
     */
    void  first_similar_function (void);
    void second_similar_function (void);
    /**@}*/
    

    For practical example see nvs_flash/include/nvs.h.

  4. You may want to go even further and skip some code like repetitive defines or enumerations. In such case, enclose the code within /** @cond */ and /** @endcond */ commands. Example of such implementation is provided in driver/gpio/include/driver/gpio.h.

  5. Use markdown to make your documentation even more readable. You will add headers, links, tables and more.

    *
    * [ESP32-S2 Technical Reference Manual](https://www.espressif.com/sites/default/files/documentation/esp32-s2_technical_reference_manual_en.pdf)
    *
    

Note

Code snippets, notes, links, etc., will not make it to the documentation, if not enclosed in a comment block associated with one of the documented objects.

  1. Prepare one or more complete code examples together with description. Place description to a separate file README.md in specific folder of examples directory.

Standardize Document Format

When it comes to text, please follow guidelines below to provide well-formatted Markdown (.md) or reST (.rst) documents.

  1. Please ensure that one paragraph is written in one line. Do not break lines like below. Breaking lines to enhance readability is only suitable for writing code. To make the text easier to read, it is recommended to place an empty line to separate the paragraph.

    One line for one paragraph - recommend (click to enlarge)

    One line for one paragraph (click to enlarge)

    One line for one paragraph - not recommend (click to enlarge)

    No line breaks within the same paragraph (click to enlarge)

  2. Please make the line number of CN and EN documents consistent like below. The benefit of this approach is that it can save time for both writers and translators. When non-bilingual writers need to update text, they only need to update the same line in the corresponding CN or EN document. For translators, if documents are updated in English, then translators can quickly locate where to update in the corresponding CN document later. Besides, by comparing the total number of lines in EN and CN documents, you can quickly find out whether the CN version lags behind the EN version.

    Keep the line number for EN and CN files consistent (click to enlarge)

    Keep the line number for EN and CN documents consistent (click to enlarge)

Building Documentation

The documentation is built with the esp-docs Python package, which is a wrapper around Sphinx.

To install it simply do:

pip install esp-docs

After a successful install then the documentation can be built from the docs folder with:

build-docs build

or for specific target and language with:

build-docs -t esp32 -l en build

For more in-depth documentation about esp-docs features please see the documentation at esp-docs.

Wrap Up

We love good code that is doing cool things. We love it even better, if it is well-documented, so we can quickly make it run and also do the cool things.

Go ahead, contribute your code and documentation!