ESP-BLE-MESH Architecture

[中文]

This document introduces ESP-BLE-MESH architecture overview, ESP-BLE-MESH architecture implementation as well as ESP-BLE-MESH auxiliary routines.

  • ESP-BLE-MESH Architecture Overview

    • Describes the five major parts of ESP-BLE-MESH architecture and the functionality of each part.

  • ESP-BLE-MESH Architecture Implementation

    • Describes the basic functions of ESP-BLE-MESH files, the correspondence between files and ESP-BLE-MESH architecture, and the interface for calling among files.

  • ESP-BLE-MESH Auxiliary Routines

    • Describe the auxiliary routines of ESP-BLE-MESH, such as Mesh network management, Mesh features, etc.

1. ESP-BLE-MESH Architecture Overview

Currently ESP-BLE-MESH has implemented most functions of Mesh Profile and all the Client Models defined in Mesh Model specification. Those missing functions/models are under development and will be provided soon. ESP-BLE-MESH architecture has been granted the official Bluetooth certification.

../../_images/esp-ble-mesh-architecture.png

Figure 1.1 ESP-BLE-MESH Architecture Diagram

ESP-BLE-MESH architecture includes five key parts:

  • Mesh Protocol Stack

    • Mesh Networking is responsible for processing of messages of ESP-BLE-MESH nodes.

    • Mesh Provisioning is responsible for provisioning flow of ESP-BLE-MESH devices.

    • Mesh Models is responsible for the implementation of SIG-defined models.

  • Network Management

    • Implements several network management procedures, including node removal procedure, IV Index recovery procedure, etc.

  • Features

    • Include several ESP-BLE-MESH features, e.g. Low Power feature, Friend feature, Relay feature, etc.

  • Mesh Bearer Layer

    • Includes Advertising Bearer and GATT Bearer. The bearer layer is crucial to ESP-BLE-MESH protocol stack which is built on Bluetooth Low-Energy technology, because the protocol stack must make use of the bearer layer to transmit data via the BLE advertising channel and connection channel.

  • Applications

    • Based on ESP-BLE-MESH protocol stack and Mesh Models.

    • By calling API and handling Event, Applications interact with Mesh Networking and Mesh Provisioning in ESP-BLE-MESH protocol stack, as well as a series of Models provided by Mesh Models.

1.1 Mesh Protocol Stack

1.1.1 Mesh Networking

Mesh Networking in the protocol stack architecture implements the following functions:

  • The communication between nodes in the Mesh network.

  • Encryption and decryption of messages in the Mesh network.

  • Management of Mesh network resources (Network Key, IV Index, etc.).

  • Segmentation and reassembly of Mesh network messages.

  • Model mapping of messages between different models.

  • For more features, please see ESP-BLE-MESH Feature List.

The implementation of Mesh Networking functions is based on hierarchy structure. Functions of each layer are shown in Table 1.1:

Table 1.1 Mesh Networking Architecture Description

Layer

Function

Access Layer

Access Layer not only defines the format of application data, but also defines and controls the encryption and decryption of the data packets conducted by Upper Transport Layer.

Upper Transport Layer

Upper Transport Layer encrypts, decrypts, and authenticates application data to and from the access layer; it also handles special messages called “transport control messages”, including messages related to “friendship” and heartbeat messages.

Lower Transport Layer

Lower Transport Layer handles segmentation and reassembly of PDU.

Network Layer

Network Layer defines the address type and format of the network messages, and implements the relay function of the device.

1.1.2 Mesh Provisioning

Mesh Provisioning in the protocol stack architecture implements the following functions:

  • Provisioning of unprovisioned devices.

  • Allocation of Mesh network resources (unicast address, IV Index, NetKey, etc.).

  • Four authentication methods support during provisioning.

  • For more features, please see ESP-BLE-MESH Feature List.

The implementation of Mesh Provisioning functions is based on hierarchy structure. Functions of each layer are shown in Table 1.2:

Table 1.2 Mesh Provisioning Architecture Description

Layer

Function

Provisioning PDUs

Provisioning PDUs from different layers are handled using provisioning protocol.

Generic Provisioning PDU/Proxy PDU

The Provisioning PDUs are transmitted to an unprovisioned device using a Generic Provisioning layer or Proxy protocol layer.

PB-ADV/PB-GATT

These layers define how the Provisioning PDUs are transmitted as transactions that can be segmented and reassembled.

Advertising/Provisioning Service

The provisioning bearers define how sessions are established such that the transactions from the generic provisioning layer can be delivered to a single device.

1.1.3 Mesh Models

Mesh Models in the protocol stack architecture implements the following functions:

  • Configuration Client/Server Models

  • Health Client/Server Models

  • Generic Client/Server Models

  • Sensor Client/Server Models

  • Time and Scenes Client/Server Models

  • Lighting Client/Server Models

Functions of each layer are shown in Table 1.3:

Table 1.3 Mesh Models Architecture Description

Layer

Function

Model Layer

Model Layer implements models used to standardize the operation of typical user scenarios, including Generic Client/Server Models, Sensor Client/Server Models, Time and Scenes Client/Server Models, Lighting Client/Server Models and several vendor models.

Foundation Model Layer

Foundation Model Layer implements models related to ESP-BLE-MESH configuration, management, self diagnosis, etc.

1.2 Mesh Network Management

Network Management implements the following functions:

  • Node removal procedure is used to remove a node from the network.

  • IV Index recovery procedure is used to recover a node’s IV Index.

  • IV update procedure is used to update the nodes’ IV Index.

  • Key refresh procedure is used to update the nodes’ NetKey, AppKey, etc.

  • Network creation procedure is used to create a mesh network.

  • NVS storage is used to store node’s networking information.

1.3 Mesh Features

Features includes the following options:

  • Low Power feature is used to reduce node’s power consumption.

  • Friend feature is used to store messages for Low Power nodes.

  • Relay feature is used to relay/forward Network PDUs received by a node over the advertising bearer.

  • Proxy Server/Client are two node roles in proxy protocol, which enable nodes to send and receive Network PDUs, mesh beacons, proxy configuration messages and Provisioning PDUs over a connection-oriented bearer.

1.4 Mesh Bearer Layer

Bearers in the protocol stack architecture are responsible for passing of data between ESP-BLE-MESH protocol stack and Bluetooth Low Energy Core.

Bearers can be taken as a carrier layer based on Bluetooth Low Energy Core, which implements the function of receiving and transmitting data for the ESP-BLE-MESH protocol stack.

Table 1.3 Mesh Bearers Description

Layer

Function

GATT Bearer

The GATT Bearer uses the Proxy protocol to transmit and receive Proxy PDUs between two devices over a GATT connection.

Advertising Bearer

When using the Advertising Bearer, a mesh packet shall be sent in the Advertising Data of a Bluetooth Low Energy advertising PDU using the Mesh Message AD Type.

1.5 Mesh Applications

The Applications in the protocol stack architecture implement the corresponding functions by calling the API provided by the ESP-BLE-MESH protocol stack and processing the Event reported by the protocol stack. There are some common applications, such as gateway, lighting and etc.

Interaction between application layer(Applications)and API / Event

  • Application layer calls API

    • Call the provisioning-related API for provisioning.

    • Call the model-related API to send messages.

    • Call the device-attributes-related API to get local information about the device.

  • Application layer processes Event

    The application layer is designed based on events, which take parameters to the application layer. Events are mainly divided into two categories.

    • The events completed by calling API.
      • Such as nodes sending messages.

    • The events that the protocol stack actively reports to the application layer.
      • The Event that the protocol stack actively reports.

      • The Event that Model actively reports.

  • The event is reported by the callback function registered by the application layer, and the callback function also contains the corresponding processing of the event.

Interaction between API / Event and ESP-BLE-MESH protocol stack

  • API used by user mainly calls functions provided by Mesh Networking, Mesh Provisioning and Mesh Models.

  • The interaction between API / Event and the protocol stack does not operate across the hierarchy of the protocol stack. For example, API does not call functions related to Network Layer.

2. ESP-BLE-MESH Architecture Implementation

The design and implementation of ESP-BLE-MESH architecture is based on layers and modules. In details, Section 2.1 (Mesh Networking Implementation), Section 2.2 (Mesh Provisioning Implementation) and Section 2.3 (Mesh Bearers Implementation) are based on layers, and Section 2.4 (Mesh Models Implementation) is on modules.

  • Layer-based Approach: With Layer-based approach, the architecture is designed according to the layers specified in the Mesh Profile Specification. Each layer has its unique files which include APIs of this layer and etc. The specific design is shown in Figure 2.1.

  • Module-based Approach: Every file implements an independent function that can be called by other programs.

../../_images/esp-ble-mesh-interface.png

Figure 2.1 ESP-BLE-MESH Architecture Implementation Diagram

The design of ESP-BLE-MESH architecture uses layer-based approach. The sequence of layers which data packets are processed through is fixed, i.e., the processing of packets will form a message flow. Thus, we could see flows of messages from the Protocol Stack Interface Diagram in Figure 2.1.

2.1 Mesh Protocol Stack Implementation

2.1.1 Mesh Networking Implementation

The list of files and the functions implemented in each file in Mesh Networking are shown in Table 2.1:

Table 2.1 Mesh Networking File Description :widths: 40 150 :header-rows: 1

File

Functionality

access.c

ESP-BLE-MESH Access Layer

transport.c

ESP-BLE-MESH Lower/Upper Transport Layer

net.c

ESP-BLE-MESH Network Layer

adv.c

A task used to send ESP-BLE-MESH advertising packets, a callback used to handle received advertising packets and APIs used to allocate adv buffers

2.1.2 Mesh Provisioning Implementation

The implementation of Mesh Provisioning is divided into two chunks due to the Node/Provisioner coexistence.

Specific files that provide implementation of provisioning of Node are shown in Table 2.2:

Table 2.2 Mesh Provisioning (Node) File Description

File

Functionality

prov.c

ESP-BLE-MESH Node provisioning (PB-ADV & PB-GATT)

proxy_server.c

ESP-BLE-MESH Proxy Server related functionalities

beacon.c

APIs used to handle ESP-BLE-MESH Beacons

Specific files that implement functions of Provisioner are shown in Table 2.3:

Table 2.3 Mesh Provisioning (Provisioner) File Description

File

Functionality

provisioner_prov.c

ESP-BLE-MESH Provisioner provisioning (PB-ADV & PB-GATT)

proxy_client.c

ESP-BLE-MESH Proxy Client related functionalities

provisioner_beacon.c

ESP-BLE-MESH Provisioner receives Unprovisioned Device Beacon

2.1.3 Mesh Models Implementation

Mesh Models are used to implement the specific functions of model in nodes. Server model is used to maintain node status. Client model is used to obtain and modify node state.

Table 2.4 Mesh Models File Description

File

Functionality

cfg_cli.c

Send Configuration Client messages and receive corresponding response messages

cfg_srv.c

Receive Configuration Client messages and send proper response messages

health_cli.c

Send Health Client messages and receive corresponding response messages

health_srv.c

Receive Health Client messages and send proper response messages

client_common.c

ESP-BLE-MESH model related operations

generic_client.c

Send ESP-BLE-MESH Generic Client messages and receive corresponding response messages

lighting_client.c

Send ESP-BLE-MESH Lighting Client messages and receive corresponding response messages

sensor_client.c

Send ESP-BLE-MESH Sensor Client messages and receive corresponding response messages

time_scene_client.c

Send ESP-BLE-MESH Time Scene Client messages and receive corresponding response messages

generic_server.c

Receive ESP-BLE-MESH Generic Client messages and send corresponding response messages

lighting_server.c

Receive ESP-BLE-MESH Lighting Client messages and send corresponding response messages

sensor_server.c

Receive ESP-BLE-MESH Sensor Client messages and send corresponding response messages

time_scene_server.c

Receive ESP-BLE-MESH Time Scene Client messages and send corresponding response messages

2.2 Mesh Bearers Implementation

Portability is fully considered in the implementation of Mesh Bearers. When the ESP-BLE-MESH protocol stack is being ported to other platforms, users only need to modify mesh_bearer_adapt.c .

Table 2.5 Mesh Bearers File Description

File

Functionality

mesh_bearer_adapt.c

ESP-BLE-MESH Bearer Layer adapter,This file provides the interfaces used to receive and send ESP-BLE-MESH ADV & GATT related packets.

Note

mesh_bearer_adapt.c is the implementation of Advertising Bearer and GATT Bearer in Mesh Networking framework.

2.3 Mesh Applications Implementation

We have provided a series of application examples for customer development, and users can develop products based on ESP-BLE-MESH Examples.

3. Auxiliary Routine

Auxiliary routine refers to optional functions in the ESP-BLE-MESH protocol stack. The design of the auxiliary routine generally implement the truncation of code through CONFIG_BLE_MESH.

3.1 Features

  • Low Power

  • Friend

  • Relay

  • Proxy Client/Server

3.2 Network Management

  • Node Removal procedure

  • IV Index Recovery procedure

  • IV Update procedure

  • Key Refresh procedure

  • Network Creation procedure

  • NVS Storage

3.3 Auxiliary Routine Implementation

When adopting the design of independent module, the two main factors should be considered:

  • The module can not be implemented hierarchically, and it can be completely independent, which means it does not rely on the implementation of other modules.

  • The functions in the module will be used repeatedly, so it is reasonable to design it into a module. Independent module is shown in Table 3.1:

Table 3.1 Module File Description

File

Functionality

lpn.c

ESP-BLE-MESH Low Power functionality

friend.c

ESP-BLE-MESH Friend functionality

net.c

ESP-BLE-MESH Relay feature, network creation, IV Update procedure, IV Index recovery procedure, Key Refresh procedure related functionalities

proxy_server.c

ESP-BLE-MESH Proxy Server related functionalities

proxy_client.c

ESP-BLE-MESH Proxy Client related functionalities

settings.c

ESP-BLE-MESH NVS storage functionality

main.c

ESP-BLE-MESH stack initialize, stack enable, node removal related functionalities