IDF Docker Image¶
IDF Docker image (
espressif/idf) is intended for building applications and libraries with specific versions of ESP-IDF, when doing automated builds.
The image contains:
Common utilities such as git, wget, curl, zip.
Python 3.6 or newer.
A copy of a specific version of ESP-IDF (see below for information about versions).
IDF_PATHenvironment variable is set, and points to ESP-IDF location in the container.
All the build tools required for the specific version of ESP-IDF: CMake, make, ninja, cross-compiler toolchains, etc.
All Python packages required by ESP-IDF are installed in a virtual environment.
The image entrypoint sets up
PATH environment variable to point to the correct version of tools, and activates the Python virtual environment. As a result, the environment is ready to use the ESP-IDF build system.
The image can also be used as a base for custom images, if additional utilities are required.
Setting up Docker¶
Before using the
espressif/idf Docker image locally, make sure you have Docker installed. Follow the instructions at https://docs.docker.com/install/, if it is not installed yet.
If using the image in CI environment, consult the documentation of your CI service on how to specify the image used for the build process.
Building a project with CMake¶
In the project directory, run:
docker run --rm -v $PWD:/project -w /project espressif/idf idf.py build
The above command explained:
docker run: runs a Docker image. It is a shorter form of the command
docker container run.
--rm: removes the container when the build is finished
-v $PWD:/project: mounts the current directory on the host (
/projectdirectory in the container
espressif/idf: uses Docker image
latest(implicitly added by Docker when no tag is specified)
idf.py build: runs this command inside the container
To build with a specific docker image tag, specify it as
espressif/idf:TAG, for example:
docker run --rm -v $PWD:/project -w /project espressif/idf:release-v4.0 idf.py build
You can check the up-to-date list of available tags at https://hub.docker.com/r/espressif/idf/tags.
Building a project with GNU Make¶
Same as for CMake, except that the build command is different:
docker run --rm -v $PWD:/project -w /project espressif/idf make defconfig all -j4
sdkconfig file does not exist, the default behavior of GNU Make build system is to open the menuconfig UI. This may be not desired in automated build environments. To ensure that the
sdkconfig file exists,
defconfig target is added before
If you intend to build the same project repeatedly, you may bind the
tools/kconfig directory of ESP-IDF to a named volume. This will prevent Kconfig tools, located in ESP-IDF directory, from being rebuilt, causing a rebuild of the rest of the project:
docker run --rm -v $PWD:/project -v kconfig:/opt/esp/idf/tools/kconfig -w /project espressif/idf make defconfig all -j4
If you need clean up the
kconfig volume, run
docker volume rm kconfig.
tools/kconfig directory to a volume is not necessary when using the CMake build system.
Using the image interactively¶
It is also possible to do builds interactively, to debug build issues or test the automated build scripts. Start the container with -i -t flags:
docker run --rm -v $PWD:/project -w /project -it espressif/idf
Then inside the container, use
idf.py as usual:
Commands which communicate with the development board, such as
idf.py flash and
idf.py monitor will not work in the container unless the serial port is passed through into the container. However currently this is not possible with Docker for Windows (https://github.com/docker/for-win/issues/1018) and Docker for Mac (https://github.com/docker/for-mac/issues/900).