eFuse 管理器
简介
eFuse 是一种微型的一次性可编程保险丝,可以通过“烧录”(即编程)将数据存储到 ESP32-C3 中。eFuse 位组成不同的数据字段,用于系统参数(即 ESP32-C3 的 ESP-IDF 使用的数据参数)或用户自定义参数。
eFuse 管理器组件中集合了多种工具和 API,可帮助定义、烧录和访问 eFuse 参数。常用的工具和 API 包括:
表格格式,用于在 CSV 文件中定义 eFuse 数据字段
efuse_table_gen.py
工具,用于生成 CSV 文件指定的 eFuse 数据字段对应的 C 结构体用于读/写 eFuse 数据字段的 C API 集合
eFuse Manager 与 idf.py
idf.py
通过 idf.py efuse-<subcommand>
命令为 eFuse 管理器提供了部分功能。本文档主要使用基于 idf.py
的命令,只有在涉及高级功能或罕见情况时,会使用基于 espefuse.py
的命令。要查看所有可用的命令,请运行 idf.py --help
并搜索以 efuse-
为前缀的命令。
硬件描述
ESP32-C3 有多个 eFuse,可用于存储系统参数和用户参数。每个 eFuse 都是一个一位字段,可以烧写为 1,之后就不能再恢复为 0。eFuse 位被分成了多个 256 位的块,每个块又被分成 8 个 32 位寄存器。部分块保留用于系统参数,其它块可用于用户参数。
如需了解更多内容,请参阅 ESP32-C3 技术参考手册 > eFuse 控制器 (eFuse) [PDF]。
ESP32-C3 有 11 个 eFuse 块,每个块的大小为 256 位(并非所有位都可用于用户参数):
EFUSE_BLK0 完全用于系统参数;
EFUSE_BLK1 完全用于系统参数;
EFUSE_BLK2 完全用于系统参数;
EFUSE_BLK3(也称为 EFUSE_BLK_USER_DATA)可用于用户参数;
EFUSE_BLK4 至 EFUSE_BLK8(即 EFUSE_BLK_KEY0 至 EFUSE_BLK_KEY4)可以存储安全启动或 flash 加密的密钥。不使用这两个功能时,可以用于用户参数。
EFUSE_BLK9(即 EFUSE_BLK_KEY5)可用于任何用途,但由于硬件问题,不能用于 flash 加密;
EFUSE_BLK10(即 EFUSE_BLK_SYS_DATA_PART2)保留用于系统参数。
定义 eFuse 字段
eFuse 字段通过 CSV 文件中特定格式的表格进行定义。通过这种格式,可定义任意长度和任意位数的 eFuse 字段。
另外,通过这种格式,可以结构化地定义由子字段组成的 eFuse 字段,这意味着一个父 eFuse 字段可能由占用相同 eFuse 位的多个子 eFuse 字段组成。
定义格式
一般情况下,每个记录在定义表格中占据一行,每行包含以下值(也就是列):
# field_name, efuse_block(EFUSE_BLK0..EFUSE_BLK10), bit_start(0..255), bit_count(1..256), comment
field_name
eFuse 字段的名称。
字段名称前会自动添加
ESP_EFUSE_
前缀,在 C 代码中,可通过此名称来访问 eFuse 字段。对于每个 eFuse 字段,
field_name
必须唯一。如果此值为空,说明该行与前一行合并。这样就可以定义任意位排序的 eFuse 字段(例如通用表中的
MAC_FACTORY
字段)。使用
.
来定义一个子 eFuse 字段。详情请参考 结构化 eFuse 字段。
efuse_block
eFuse 字段的块号。例如 EFUSE_BLK0 到 EFUSE_BLK10。
这一字段决定了 eFuse 字段在哪个块中。
bit_start
eFuse 字段在块内的位置偏移(0 至 255 位)。
bit_start
是可选项,可省略。当省略时,如果上一条记录位于同一个 eFuse 块中,
bit_start
会被设置为上一条记录的bit_start + bit_count
。如果上一条记录位于不同的 eFuse 块中,则会报错。
bit_count
eFuse 字段的大小,以位为单位(1 至 N)。
bit_count
不能省略如将其设置为
MAX_BLK_LEN
,则此 eFuse 字段为块中允许的最大 eFuse 字段大小。
comment
描述 eFuse 字段的注释。
此注释会逐字复制到 C 头文件中。
如果一个 eFuse 字段需要非顺序位序,那么该 eFuse 字段将占用多行。应在第一行的 field_name
处定该 eFuse 字段的名称,并且将其他行的 field_name
留空。这样就表明这些行属于同一个 eFuse 字段。
以下示例中定义了两个 eFuse 字段。首先定义非连续的 eFuse 字段 MAC_FACTORY
,然后定义了常规 eFuse 字段 MAC_FACTORY_CRC
:
# Factory MAC address #
#######################
MAC_FACTORY, EFUSE_BLK0, 72, 8, Factory MAC addr [0]
, EFUSE_BLK0, 64, 8, Factory MAC addr [1]
, EFUSE_BLK0, 56, 8, Factory MAC addr [2]
, EFUSE_BLK0, 48, 8, Factory MAC addr [3]
, EFUSE_BLK0, 40, 8, Factory MAC addr [4]
, EFUSE_BLK0, 32, 8, Factory MAC addr [5]
MAC_FACTORY_CRC, EFUSE_BLK0, 80, 8, CRC8 for factory MAC address
在 C 代码中,可以通过 ESP_EFUSE_MAC_FACTORY
和 ESP_EFUSE_MAC_FACTORY_CRC
使用这两个字段。
结构化 eFuse 字段
通常情况下,一个 eFuse 字段代表一个特定的参数。不过,在某些情况下,一个 eFuse 字段可能由多个子字段组成,因此有必要隔离访问这些子字段。例如,如果一个 eFuse 字段包含一个浮点参数,则可以将浮点的符号、指数和尾数字段作为单独的 eFuse 字段进行访问。
因此,可以在 field_name
中使用 .
操作符,以结构化的方式定义 eFuse 字段。例如,XX.YY.ZZ
定义了一个 eFuse 字段 ZZ
,它是 eFuse 字段 YY
的子字段,而 YY
又是 eFuse 字段 XX
的子字段。
以下示例展示了如何以定义结构化 eFuse 字段:
WR_DIS, EFUSE_BLK0, 0, 32, Write protection
WR_DIS.RD_DIS, EFUSE_BLK0, 0, 1, Write protection for RD_DIS
WR_DIS.FIELD_1, EFUSE_BLK0, 1, 1, Write protection for FIELD_1
WR_DIS.FIELD_2, EFUSE_BLK0, 2, 4, Write protection for FIELD_2 (includes B1 and B2)
WR_DIS.FIELD_2.B1, EFUSE_BLK0, 2, 2, Write protection for FIELD_2.B1
WR_DIS.FIELD_2.B2, EFUSE_BLK0, 4, 2, Write protection for FIELD_2.B2
WR_DIS.FIELD_3, EFUSE_BLK0, 5, 1, Write protection for FIELD_3
WR_DIS.FIELD_3.ALIAS, EFUSE_BLK0, 5, 1, Write protection for FIELD_3 (just a alias for WR_DIS.FIELD_3)
WR_DIS.FIELD_4, EFUSE_BLK0, 7, 1, Write protection for FIELD_4
在上例中可以看出:
WR_DIS
为父 eFuse 字段。其他所有行的field_name
都具有WR_DIS.
前缀,因此都是WR_DIS
的子字段。子字段必须与父字段使用相同的位。注意子字段和父字段的
bit_start
和bit_count
:子字段的位总是在其父字段范围内。例如,
WR_DIS.RD_DIS
和WR_DIS.RD_DIS
占用了WR_DIS
的第一位和第二位。子字段使用的位不能重叠(子字段有别名时除外)。
可以将别名创建为子字段。例如,
WR_DIS.FIELD_3.ALIAS
既是WR_DIS.FIELD_3
的子字段,又是别名,因为它们占用的位相同。
所有 eFuse 字段最终都会通过 efuse_table_gen.py
工具转换为 C 结构体。每个 C 结构体从 eFuse 字段的 field_name
中衍生出标识符,并用 _
替换所有的 .
符号。以 WR_DIS.RD_DIS
和 WR_DIS.FIELD_2.B1
为例,这两个 eFuse 字段用 C 语言分别表示为 ESP_EFUSE_WR_DIS_RD_DIS
和 ESP_EFUSE_WR_DIS_FIELD_2_B1
。
efuse_table_gen.py
工具还会检查字段是否相互重叠并在字段范围内。如有违反,会生成以下错误:
Field at USER_DATA, EFUSE_BLK3, 0, 256 intersected with SERIAL_NUMBER, EFUSE_BLK3, 0, 32
要解决此问题,可使用 USER_DATA.SERIAL_NUMBER
,让 SERIAL_NUMBER
成为 USER_DATA
的子字段。
Field at FIELD, EFUSE_BLK3, 0, 50 out of range FIELD.MAJOR_NUMBER, EFUSE_BLK3, 60, 32
要解决此问题,可将 FIELD.MAJOR_NUMBER
的 bit_start
从 60
改为 0
,使 MAJOR_NUMBER
与 FIELD
重叠。
efuse_table_gen.py
工具
efuse_table_gen.py
工具能够从 CSV 文件生成 C 源文件,其中包含 CSV 文件中定义的 eFuse 字段的对应 C 结构体(类型为 esp_efuse_desc_t
)。此外,该工具还会在生成 C 源文件前对 CSV 文件进行检查,以确保:
eFuse 字段的名称唯一
eFuse 字段使用的位不重叠
如前所述,eFuse 字段可用于存储系统参数或用户参数。由于系统参数 eFuse 字段是 ESP-IDF 和 ESP32-C3 的内在要求,这些 eFuse 字段被定义在 通用 CSV 文件中,即 esp_efuse_table.csv
中,是 ESP-IDF 的一部分。对于用户参数 eFuse 字段,用户应在 自定义 CSV 文件(如 esp_efuse_custom_table.csv
)中进行定义。
要从 通用 CSV 文件生成 C 源文件,运行 idf.py efuse-common-table
或以下命令:
cd $IDF_PATH/components/efuse/
./efuse_table_gen.py --idf_target esp32c3 esp32c3/esp_efuse_table.csv
然后,就会在路径 $IDF_PATH/components/efuse/esp32c3
中生成以下 C 源文件/头文件:
esp_efuse_table.c
文件,包含系统参数 eFuse 字段的 C 结构体。esp_efuse_table.h
文件,位于include
文件夹。应用程序可包含该头文件,以使用上述 C 结构体。
要使用 自定义 CSV 文件生成 C 源文件,请运行 idf.py efuse-custom-table
或以下命令:
cd $IDF_PATH/components/efuse/
./efuse_table_gen.py --idf_target esp32c3 esp32c3/esp_efuse_table.csv PROJECT_PATH/main/esp_efuse_custom_table.csv
然后在 PROJECT_PATH/main
路径下生成 C 源/头文件:
esp_efuse_custom_table.c
文件,包含用户参数 eFuse 字段的 C 结构体。esp_efuse_custom_table.h
文件,位于include
文件夹。应用程序可包含该头文件,以使用上述 C 结构体。
要使用生成的字段,需添加以下头文件:
#include "esp_efuse.h"
#include "esp_efuse_table.h" // 或 "esp_efuse_custom_table.h"
支持的编码方式
eFuse 支持各种编码方式,能够检测或纠正错误,保护 eFuse 数据不受损坏。
ESP32-C3 不支持选择编码方式,会自动将以下编码方案应用于各 eFuse 块:
非编码
方式,应用于 EFUSE_BLK0。RS 编码
方式。应用于 EFUSE_BLK1 - EFUSE_BLK10。
非编码
方式
非编码
方式会自动应用于 EFUSE_BLK0。此方式不涉及任何编码,只是在硬件中维护 EFUSE_BLK0 的四个备份,因此,每个位实际存储四次,EFUSE_BLK0 也可以多次写入。
该方案由硬件自动应用,软件中不可见。
RS 编码
方式
RS 编码
方式,即 Reed-Solomon 编码方式,会自动应用于 EFUSE_BLK1 至 EFUSE_BLK10。该编码方式支持至多 6 个字节的自动纠错。
软件使用 RS(44, 32)
对 32 字节的 EFUSE_BLKx 进行编码,生成一个 12 字节的校验码,然后将 EFUSE_BLKx 和校验码同时烧录到 eFuse 中。
在回读 eFuse 块时,eFuse 控制器会对 RS 编码
进行自动解码和纠错。因为 RS
校验码是根据整个 256 位 eFuse 块生成的,所以每个块只能写入一次,且必须采用批量写入模式。
批量写入模式
如需在运行时写入 eFuse 字段,可能要采用批量写入模式,具体取决于 eFuse 块使用的编码方案。批量写入模式的使用步骤如下:
调用
esp_efuse_batch_write_begin()
启用批量写入模式。使用各
esp_efuse_write_...
函数,按照常规方法写入 eFuse 字段。完成所有写入后,调用
esp_efuse_batch_write_commit()
将准备好的数据烧录到 eFuse 块中。
警告
如果 eFuse 块中已经存在通过 Reed-Solomon
编码方案预先写入的数据,则无法在不破坏先前数据校验和/校验符号的情况下,写入额外的内容(即使需要写入的位为空)。
先前的校验和/校验符号会被新的校验和/校验符号覆盖,并完全销毁。(但不会损坏有效负载 eFuse)。
如发现在 CUSTOM_MAC、SPI_PAD_CONFIG_HD、SPI_PAD_CONFIG_CS 等块中存在预写入数据,请联系乐鑫获取所需的预烧录 eFuse。
仅供测试(不推荐):可以忽略或抑制违反编码方式数据的错误,从而在 eFuse 块中烧录必要的位。
eFuse API
可以通过指向描述结构的指针来访问 eFuse 字段。API 函数可以实现一些基本操作:
esp_efuse_read_field_blob()
- 返回读取的 eFuse 位的数组。esp_efuse_read_field_cnt()
- 返回烧写为 “1” 的位的数量。esp_efuse_write_field_blob()
- 写入一个数组。esp_efuse_write_field_cnt()
- 将所需数量的位写为 “1”。esp_efuse_get_field_size()
- 返回字段的位数。esp_efuse_read_reg()
- 返回 eFuse 寄存器的值。esp_efuse_write_reg()
- 将值写入 eFuse 寄存器。esp_efuse_get_coding_scheme()
- 返回块的 eFuse 编码方式。esp_efuse_read_block()
- 从指定偏移位置开始读取指定大小的 eFuse 块中的密钥。esp_efuse_write_block()
- 从指定偏移位置开始将密钥写入指定大小的 eFuse 块中。esp_efuse_batch_write_begin()
- 设置字段写入的批处理模式。esp_efuse_batch_write_commit()
- 写入所有为批处理写入模式准备的数据,并重置批处理写入模式。esp_efuse_batch_write_cancel()
- 重置批处理写入模式和准备的数据。esp_efuse_get_key_dis_read()
- 返回密钥块的读保护状态。esp_efuse_set_key_dis_read()
- 设置密钥块的读保护状态。esp_efuse_get_key_dis_write()
- 返回密钥块的写保护状态。esp_efuse_set_key_dis_write()
- 设置密钥块的写保护状态。esp_efuse_get_key_purpose()
- 返回 eFuse 密钥块当前设置的用途。esp_efuse_write_key()
- 将一块密钥数据烧写到一个 eFuse 块。esp_efuse_write_keys()
- 将密钥烧写到未使用的 eFuse 块。esp_efuse_find_purpose()
- 查找设置为特定用途的密钥块。esp_efuse_get_keypurpose_dis_write()
- 返回 eFuse 密钥块的密钥用途字段的写保护状态(对于 esp32 始终为 true)。esp_efuse_key_block_unused()
- 如果密钥块未使用,则返回 true,否则返回 false。esp_efuse_destroy_block()
- 销毁此 eFuse 块中的数据。该函数有两个作用:(1) 如果未开启写保护,则将不为 1 的位都烧写为 1;(2) 如果未开启读保护,则开启读保护。
经常使用的字段有专门的函数可供使用,例如 esp_efuse_get_pkg_ver()
。
eFuse 密钥 API
EFUSE_BLK_KEY0 - EFUSE_BLK_KEY5 可以保存 6 个长度为 256 位的密钥。每个密钥都有一个 ESP_EFUSE_KEY_PURPOSE_x
字段说明密钥用途。用途字段描述见 esp_efuse_purpose_t
。
类似 ESP_EFUSE_KEY_PURPOSE_XTS_AES_...
的用途用于 flash 加密。
类似 ESP_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST...
的用途用于安全启动。
一些 eFuse API 可用于处理密钥状态:
esp_efuse_get_purpose_field()
- 返回一个指向 eFuse 密钥块的密钥用途的指针。esp_efuse_get_key()
- 返回一个指向密钥块的指针。esp_efuse_set_key_purpose()
- 为一个 eFuse 密钥块设置密钥用途。esp_efuse_set_keypurpose_dis_write()
- 为 eFuse 密钥块的密钥用途字段设置写保护。esp_efuse_find_unused_key_block()
- 搜索未使用的密钥块并返回找到的第一个结果。esp_efuse_count_unused_key_blocks()
- 返回 EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX 范围中未使用的 eFuse 密钥块数量。
esp_efuse_get_digest_revoke()
- 返回安全启动公钥摘要撤销位的状态。esp_efuse_set_digest_revoke()
- 设置安全启动公钥摘要撤销位。esp_efuse_get_write_protect_of_digest_revoke()
- 返回安全启动公钥摘要撤销位的写保护。esp_efuse_set_write_protect_of_digest_revoke()
- 设置安全启动公钥摘要撤销位的写保护。
如何添加新字段
为新字段查找空闲位。运行
idf.py show-efuse-table
查看esp_efuse_table.csv
文件,或运行以下命令:
$ ./efuse_table_gen.py esp32c3/esp_efuse_table.csv --info
Max number of bits in BLK 256
Sorted efuse table:
# field_name efuse_block bit_start bit_count
1 WR_DIS EFUSE_BLK0 0 32
2 WR_DIS.RD_DIS EFUSE_BLK0 0 1
3 WR_DIS.DIS_ICACHE EFUSE_BLK0 2 1
4 WR_DIS.DIS_USB_JTAG EFUSE_BLK0 2 1
5 WR_DIS.DIS_DOWNLOAD_ICACHE EFUSE_BLK0 2 1
6 WR_DIS.DIS_USB_SERIAL_JTAG EFUSE_BLK0 2 1
7 WR_DIS.DIS_FORCE_DOWNLOAD EFUSE_BLK0 2 1
8 WR_DIS.DIS_TWAI EFUSE_BLK0 2 1
9 WR_DIS.JTAG_SEL_ENABLE EFUSE_BLK0 2 1
10 WR_DIS.DIS_PAD_JTAG EFUSE_BLK0 2 1
11 WR_DIS.DIS_DOWNLOAD_MANUAL_ENCRYPT EFUSE_BLK0 2 1
12 WR_DIS.WDT_DELAY_SEL EFUSE_BLK0 3 1
13 WR_DIS.SPI_BOOT_CRYPT_CNT EFUSE_BLK0 4 1
14 WR_DIS.SECURE_BOOT_KEY_REVOKE0 EFUSE_BLK0 5 1
15 WR_DIS.SECURE_BOOT_KEY_REVOKE1 EFUSE_BLK0 6 1
16 WR_DIS.SECURE_BOOT_KEY_REVOKE2 EFUSE_BLK0 7 1
17 WR_DIS.KEY_PURPOSE_0 EFUSE_BLK0 8 1
18 WR_DIS.KEY_PURPOSE_1 EFUSE_BLK0 9 1
19 WR_DIS.KEY_PURPOSE_2 EFUSE_BLK0 10 1
20 WR_DIS.KEY_PURPOSE_3 EFUSE_BLK0 11 1
21 WR_DIS.KEY_PURPOSE_4 EFUSE_BLK0 12 1
22 WR_DIS.KEY_PURPOSE_5 EFUSE_BLK0 13 1
23 WR_DIS.SECURE_BOOT_EN EFUSE_BLK0 15 1
24 WR_DIS.SECURE_BOOT_AGGRESSIVE_REVOKE EFUSE_BLK0 16 1
25 WR_DIS.FLASH_TPUW EFUSE_BLK0 18 1
26 WR_DIS.DIS_DOWNLOAD_MODE EFUSE_BLK0 18 1
27 WR_DIS.DIS_DIRECT_BOOT EFUSE_BLK0 18 1
28 WR_DIS.DIS_USB_SERIAL_JTAG_ROM_PRINT EFUSE_BLK0 18 1
29 WR_DIS.DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE EFUSE_BLK0 18 1
30 WR_DIS.ENABLE_SECURITY_DOWNLOAD EFUSE_BLK0 18 1
31 WR_DIS.UART_PRINT_CONTROL EFUSE_BLK0 18 1
32 WR_DIS.FORCE_SEND_RESUME EFUSE_BLK0 18 1
33 WR_DIS.SECURE_VERSION EFUSE_BLK0 18 1
34 WR_DIS.ERR_RST_ENABLE EFUSE_BLK0 19 1
35 WR_DIS.DISABLE_WAFER_VERSION_MAJOR EFUSE_BLK0 19 1
36 WR_DIS.DISABLE_BLK_VERSION_MAJOR EFUSE_BLK0 19 1
37 WR_DIS.BLK1 EFUSE_BLK0 20 1
38 WR_DIS.MAC EFUSE_BLK0 20 1
39 WR_DIS.SPI_PAD_CONFIG_CLK EFUSE_BLK0 20 1
40 WR_DIS.SPI_PAD_CONFIG_Q EFUSE_BLK0 20 1
41 WR_DIS.SPI_PAD_CONFIG_D EFUSE_BLK0 20 1
42 WR_DIS.SPI_PAD_CONFIG_CS EFUSE_BLK0 20 1
43 WR_DIS.SPI_PAD_CONFIG_HD EFUSE_BLK0 20 1
44 WR_DIS.SPI_PAD_CONFIG_WP EFUSE_BLK0 20 1
45 WR_DIS.SPI_PAD_CONFIG_DQS EFUSE_BLK0 20 1
46 WR_DIS.SPI_PAD_CONFIG_D4 EFUSE_BLK0 20 1
47 WR_DIS.SPI_PAD_CONFIG_D5 EFUSE_BLK0 20 1
48 WR_DIS.SPI_PAD_CONFIG_D6 EFUSE_BLK0 20 1
49 WR_DIS.SPI_PAD_CONFIG_D7 EFUSE_BLK0 20 1
50 WR_DIS.WAFER_VERSION_MINOR_LO EFUSE_BLK0 20 1
51 WR_DIS.PKG_VERSION EFUSE_BLK0 20 1
52 WR_DIS.BLK_VERSION_MINOR EFUSE_BLK0 20 1
53 WR_DIS.K_RTC_LDO EFUSE_BLK0 20 1
54 WR_DIS.K_DIG_LDO EFUSE_BLK0 20 1
55 WR_DIS.V_RTC_DBIAS20 EFUSE_BLK0 20 1
56 WR_DIS.V_DIG_DBIAS20 EFUSE_BLK0 20 1
57 WR_DIS.DIG_DBIAS_HVT EFUSE_BLK0 20 1
58 WR_DIS.THRES_HVT EFUSE_BLK0 20 1
59 WR_DIS.WAFER_VERSION_MINOR_HI EFUSE_BLK0 20 1
60 WR_DIS.WAFER_VERSION_MAJOR EFUSE_BLK0 20 1
61 WR_DIS.SYS_DATA_PART1 EFUSE_BLK0 21 1
62 WR_DIS.OPTIONAL_UNIQUE_ID EFUSE_BLK0 21 1
63 WR_DIS.BLK_VERSION_MAJOR EFUSE_BLK0 21 1
64 WR_DIS.TEMP_CALIB EFUSE_BLK0 21 1
65 WR_DIS.OCODE EFUSE_BLK0 21 1
66 WR_DIS.ADC1_INIT_CODE_ATTEN0 EFUSE_BLK0 21 1
67 WR_DIS.ADC1_INIT_CODE_ATTEN1 EFUSE_BLK0 21 1
68 WR_DIS.ADC1_INIT_CODE_ATTEN2 EFUSE_BLK0 21 1
69 WR_DIS.ADC1_INIT_CODE_ATTEN3 EFUSE_BLK0 21 1
70 WR_DIS.ADC1_CAL_VOL_ATTEN0 EFUSE_BLK0 21 1
71 WR_DIS.ADC1_CAL_VOL_ATTEN1 EFUSE_BLK0 21 1
72 WR_DIS.ADC1_CAL_VOL_ATTEN2 EFUSE_BLK0 21 1
73 WR_DIS.ADC1_CAL_VOL_ATTEN3 EFUSE_BLK0 21 1
74 WR_DIS.BLOCK_USR_DATA EFUSE_BLK0 22 1
75 WR_DIS.CUSTOM_MAC EFUSE_BLK0 22 1
76 WR_DIS.BLOCK_KEY0 EFUSE_BLK0 23 1
77 WR_DIS.BLOCK_KEY1 EFUSE_BLK0 24 1
78 WR_DIS.BLOCK_KEY2 EFUSE_BLK0 25 1
79 WR_DIS.BLOCK_KEY3 EFUSE_BLK0 26 1
80 WR_DIS.BLOCK_KEY4 EFUSE_BLK0 27 1
81 WR_DIS.BLOCK_KEY5 EFUSE_BLK0 28 1
82 WR_DIS.BLOCK_SYS_DATA2 EFUSE_BLK0 29 1
83 WR_DIS.USB_EXCHG_PINS EFUSE_BLK0 30 1
84 WR_DIS.VDD_SPI_AS_GPIO EFUSE_BLK0 30 1
85 WR_DIS.SOFT_DIS_JTAG EFUSE_BLK0 31 1
86 RD_DIS EFUSE_BLK0 32 7
87 RD_DIS.BLOCK_KEY0 EFUSE_BLK0 32 1
88 RD_DIS.BLOCK_KEY1 EFUSE_BLK0 33 1
89 RD_DIS.BLOCK_KEY2 EFUSE_BLK0 34 1
90 RD_DIS.BLOCK_KEY3 EFUSE_BLK0 35 1
91 RD_DIS.BLOCK_KEY4 EFUSE_BLK0 36 1
92 RD_DIS.BLOCK_KEY5 EFUSE_BLK0 37 1
93 RD_DIS.BLOCK_SYS_DATA2 EFUSE_BLK0 38 1
94 DIS_ICACHE EFUSE_BLK0 40 1
95 DIS_USB_JTAG EFUSE_BLK0 41 1
96 DIS_DOWNLOAD_ICACHE EFUSE_BLK0 42 1
97 DIS_USB_SERIAL_JTAG EFUSE_BLK0 43 1
98 DIS_FORCE_DOWNLOAD EFUSE_BLK0 44 1
99 DIS_TWAI EFUSE_BLK0 46 1
100 JTAG_SEL_ENABLE EFUSE_BLK0 47 1
101 SOFT_DIS_JTAG EFUSE_BLK0 48 3
102 DIS_PAD_JTAG EFUSE_BLK0 51 1
103 DIS_DOWNLOAD_MANUAL_ENCRYPT EFUSE_BLK0 52 1
104 USB_EXCHG_PINS EFUSE_BLK0 57 1
105 VDD_SPI_AS_GPIO EFUSE_BLK0 58 1
106 WDT_DELAY_SEL EFUSE_BLK0 80 2
107 SPI_BOOT_CRYPT_CNT EFUSE_BLK0 82 3
108 SECURE_BOOT_KEY_REVOKE0 EFUSE_BLK0 85 1
109 SECURE_BOOT_KEY_REVOKE1 EFUSE_BLK0 86 1
110 SECURE_BOOT_KEY_REVOKE2 EFUSE_BLK0 87 1
111 KEY_PURPOSE_0 EFUSE_BLK0 88 4
112 KEY_PURPOSE_1 EFUSE_BLK0 92 4
113 KEY_PURPOSE_2 EFUSE_BLK0 96 4
114 KEY_PURPOSE_3 EFUSE_BLK0 100 4
115 KEY_PURPOSE_4 EFUSE_BLK0 104 4
116 KEY_PURPOSE_5 EFUSE_BLK0 108 4
117 SECURE_BOOT_EN EFUSE_BLK0 116 1
118 SECURE_BOOT_AGGRESSIVE_REVOKE EFUSE_BLK0 117 1
119 FLASH_TPUW EFUSE_BLK0 124 4
120 DIS_DOWNLOAD_MODE EFUSE_BLK0 128 1
121 DIS_DIRECT_BOOT EFUSE_BLK0 129 1
122 DIS_USB_SERIAL_JTAG_ROM_PRINT EFUSE_BLK0 130 1
123 DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE EFUSE_BLK0 132 1
124 ENABLE_SECURITY_DOWNLOAD EFUSE_BLK0 133 1
125 UART_PRINT_CONTROL EFUSE_BLK0 134 2
126 FORCE_SEND_RESUME EFUSE_BLK0 141 1
127 SECURE_VERSION EFUSE_BLK0 142 16
128 ERR_RST_ENABLE EFUSE_BLK0 159 1
129 DISABLE_WAFER_VERSION_MAJOR EFUSE_BLK0 160 1
130 DISABLE_BLK_VERSION_MAJOR EFUSE_BLK0 161 1
131 MAC EFUSE_BLK1 0 8
132 MAC EFUSE_BLK1 8 8
133 MAC EFUSE_BLK1 16 8
134 MAC EFUSE_BLK1 24 8
135 MAC EFUSE_BLK1 32 8
136 MAC EFUSE_BLK1 40 8
137 SPI_PAD_CONFIG_CLK EFUSE_BLK1 48 6
138 SPI_PAD_CONFIG_Q EFUSE_BLK1 54 6
139 SPI_PAD_CONFIG_D EFUSE_BLK1 60 6
140 SPI_PAD_CONFIG_CS EFUSE_BLK1 66 6
141 SPI_PAD_CONFIG_HD EFUSE_BLK1 72 6
142 SPI_PAD_CONFIG_WP EFUSE_BLK1 78 6
143 SPI_PAD_CONFIG_DQS EFUSE_BLK1 84 6
144 SPI_PAD_CONFIG_D4 EFUSE_BLK1 90 6
145 SPI_PAD_CONFIG_D5 EFUSE_BLK1 96 6
146 SPI_PAD_CONFIG_D6 EFUSE_BLK1 102 6
147 SPI_PAD_CONFIG_D7 EFUSE_BLK1 108 6
148 WAFER_VERSION_MINOR_LO EFUSE_BLK1 114 3
149 PKG_VERSION EFUSE_BLK1 117 3
150 BLK_VERSION_MINOR EFUSE_BLK1 120 3
151 K_RTC_LDO EFUSE_BLK1 135 7
152 K_DIG_LDO EFUSE_BLK1 142 7
153 V_RTC_DBIAS20 EFUSE_BLK1 149 8
154 V_DIG_DBIAS20 EFUSE_BLK1 157 8
155 DIG_DBIAS_HVT EFUSE_BLK1 165 5
156 THRES_HVT EFUSE_BLK1 170 10
157 WAFER_VERSION_MINOR_HI EFUSE_BLK1 183 1
158 WAFER_VERSION_MAJOR EFUSE_BLK1 184 2
159 SYS_DATA_PART2 EFUSE_BLK10 0 256
160 OPTIONAL_UNIQUE_ID EFUSE_BLK2 0 128
161 BLK_VERSION_MAJOR EFUSE_BLK2 128 2
162 TEMP_CALIB EFUSE_BLK2 131 9
163 OCODE EFUSE_BLK2 140 8
164 ADC1_INIT_CODE_ATTEN0 EFUSE_BLK2 148 10
165 ADC1_INIT_CODE_ATTEN1 EFUSE_BLK2 158 10
166 ADC1_INIT_CODE_ATTEN2 EFUSE_BLK2 168 10
167 ADC1_INIT_CODE_ATTEN3 EFUSE_BLK2 178 10
168 ADC1_CAL_VOL_ATTEN0 EFUSE_BLK2 188 10
169 ADC1_CAL_VOL_ATTEN1 EFUSE_BLK2 198 10
170 ADC1_CAL_VOL_ATTEN2 EFUSE_BLK2 208 10
171 ADC1_CAL_VOL_ATTEN3 EFUSE_BLK2 218 10
172 USER_DATA EFUSE_BLK3 0 256
173 USER_DATA.MAC_CUSTOM EFUSE_BLK3 200 48
174 KEY0 EFUSE_BLK4 0 256
175 KEY1 EFUSE_BLK5 0 256
176 KEY2 EFUSE_BLK6 0 256
177 KEY3 EFUSE_BLK7 0 256
178 KEY4 EFUSE_BLK8 0 256
179 KEY5 EFUSE_BLK9 0 256
Used bits in efuse table:
EFUSE_BLK0
[0 31] [0 0] [2 2] ... [40 44] [46 52] [57 58] [80 111] [116 117] [124 130] [132 135] [141 157] [159 161]
EFUSE_BLK1
[0 122] [135 179] [183 185]
EFUSE_BLK10
[0 255]
EFUSE_BLK2
[0 129] [131 227]
EFUSE_BLK3
[0 255] [200 247]
EFUSE_BLK4
[0 255]
EFUSE_BLK5
[0 255]
EFUSE_BLK6
[0 255]
EFUSE_BLK7
[0 255]
EFUSE_BLK8
[0 255]
EFUSE_BLK9
[0 255]
Note: Not printed ranges are free for using. (bits in EFUSE_BLK0 are reserved for Espressif)
不包含在方括号中的位是空闲的(一些位是乐鑫的保留位)。已检查所有字段的位重叠情况。
要在现有字段中添加子字段,请参考 结构化 eFuse 字段。例如,可使用 .
操作符将字段 SERIAL_NUMBER
、MODEL_NUMBER
和 HARDWARE_REV
添加到现有的 USER_DATA
字段中,如下所示:
USER_DATA.SERIAL_NUMBER, EFUSE_BLK3, 0, 32,
USER_DATA.MODEL_NUMBER, EFUSE_BLK3, 32, 10,
USER_DATA.HARDWARE_REV, EFUSE_BLK3, 42, 10,
通常按照如下步骤添加新的 eFuse 字段:
在 CSV 文件中为每个 eFuse 字段添加一行记录。
运行
show_efuse_table
命令检查 eFuse 表。如要生成源文件,运行
efuse_common_table
或efuse_custom_table
命令。
如果遇到 intersects with
或 out of range
等错误,请参阅 结构化 eFuse 字段 中的解决办法。
位序
eFuse 位序采取小字节序(参见下方示例),这说明 eFuse 位按照从 LSB 到 MSB 的顺序进行读写:
$ idf.py efuse-dump
USER_DATA (BLOCK3 ) [3 ] read_regs: 03020100 07060504 0B0A0908 0F0E0D0C 13121111 17161514 1B1A1918 1F1E1D1C
BLOCK4 (BLOCK4 ) [4 ] read_regs: 03020100 07060504 0B0A0908 0F0E0D0C 13121111 17161514 1B1A1918 1F1E1D1C
where is the register representation:
EFUSE_RD_USR_DATA0_REG = 0x03020100
EFUSE_RD_USR_DATA1_REG = 0x07060504
EFUSE_RD_USR_DATA2_REG = 0x0B0A0908
EFUSE_RD_USR_DATA3_REG = 0x0F0E0D0C
EFUSE_RD_USR_DATA4_REG = 0x13121111
EFUSE_RD_USR_DATA5_REG = 0x17161514
EFUSE_RD_USR_DATA6_REG = 0x1B1A1918
EFUSE_RD_USR_DATA7_REG = 0x1F1E1D1C
where is the byte representation:
byte[0] = 0x00, byte[1] = 0x01, ... byte[3] = 0x03, byte[4] = 0x04, ..., byte[31] = 0x1F
例如,CSV 文件描述了 USER_DATA
字段,该字段占用 256 位,即一个完整的块。
USER_DATA, EFUSE_BLK3, 0, 256, User data
USER_DATA.FIELD1, EFUSE_BLK3, 16, 16, Field1
ID, EFUSE_BLK4, 8, 3, ID bit[0..2]
, EFUSE_BLK4, 16, 2, ID bit[3..4]
, EFUSE_BLK4, 32, 3, ID bit[5..7]
因此,读取如上 eFuse USER_DATA
块会得到以下结果:
uint8_t buf[32] = { 0 };
esp_efuse_read_field_blob(ESP_EFUSE_USER_DATA, &buf, sizeof(buf) * 8);
// buf[0] = 0x00, buf[1] = 0x01, ... buf[31] = 0x1F
uint32_t field1 = 0;
size_t field1_size = ESP_EFUSE_USER_DATA[0]->bit_count; // 可以用于这种情况,因为它只包含一个条目
esp_efuse_read_field_blob(ESP_EFUSE_USER_DATA, &field1, field1_size);
// field1 = 0x0302
uint32_t field1_1 = 0;
esp_efuse_read_field_blob(ESP_EFUSE_USER_DATA, &field1_1, 2); // 只读取前两位
// field1 = 0x0002
uint8_t id = 0;
size_t id_size = esp_efuse_get_field_size(ESP_EFUSE_ID); // 返回 6
// size_t id_size = ESP_EFUSE_USER_DATA[0]->bit_count; // 不能用于这种情况,因为其中包含 3 个条目,会返回 3 而不是 6
esp_efuse_read_field_blob(ESP_EFUSE_ID, &id, id_size);
// id = 0x91
// b'100 10 001
// [3] [2] [3]
uint8_t id_1 = 0;
esp_efuse_read_field_blob(ESP_EFUSE_ID, &id_1, 3);
// id = 0x01
// b'001
在构建阶段获取 eFuse 状态
要在项目的构建阶段获取 eFuse 状态,可以使用以下两个 CMake 函数:
espefuse_get_json_summary()
- 调用espefuse.py summary --format json
命令并返回一个 JSON 字符串(该字符串不存储在文件中)。espefuse_get_efuse()
- 在此 JSON 字符串中找到给定的 eFuse 名称并返回其属性。
该 JSON 字符串具有以下属性:
{
"MAC": {
"bit_len": 48,
"block": 0,
"category": "identity",
"description": "Factory MAC Address",
"efuse_type": "bytes:6",
"name": "MAC",
"pos": 0,
"readable": true,
"value": "94:b9:7e:5a:6e:58 (CRC 0xe2 OK)",
"word": 1,
"writeable": true
},
}
可以通过项目顶层目录下的 CMakeLists.txt
(system/efuse/CMakeLists.txt) 来使用这些函数:
# ...
project(hello_world)
espefuse_get_json_summary(efuse_json)
espefuse_get_efuse(ret_data ${efuse_json} "MAC" "value")
message("MAC:" ${ret_data})
value
属性的格式与 espefuse.py summary
或 idf.py efuse-summary
中显示的格式相同。
MAC:94:b9:7e:5a:6e:58 (CRC 0xe2 OK)
在示例测试 system/efuse/CMakeLists.txt 中,添加了一个自定义目标 efuse-filter
。这样,不仅在项目构建阶段,而在任何时候都可以运行 idf.py efuse-filter
命令读取所需的 eFuse(在 efuse_names
列表中指定)。
调试 eFuse & 单元测试
虚拟 eFuse
Kconfig 选项 CONFIG_EFUSE_VIRTUAL 在 eFuse 管理器中虚拟了 eFuse 值,因此写入操作是仿真操作,不会永久更改 eFuse 值。这对于应用程序调试和单元测试很有用处。
在启动时,eFuses 被复制到 RAM 中。此时,所有的 eFuse 操作(读和写)都是通过 RAM 执行,而不是通过实际的 eFuse 寄存器执行的。
除了 CONFIG_EFUSE_VIRTUAL 选项外,还有 CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH 选项,该选项可将 eFuse 保留在 flash 内存中。要使用此模式,partition_table 在 partition.csv
中包含名为 efuse
的分区:
efuse_em, data, efuse, , 0x2000,
在启动阶段,eFuse 会从 flash 中复制到 RAM 中,在 flash 为空的情况下,则从实际的 eFuse 复制到 RAM 中,然后更新 flash。此选项能够在重启后仍然保留 eFuse,用于测试安全启动和 flash 加密功能。
flash 加密测试
flash 加密是一项硬件功能,需要物理烧录 eFuse key
和 FLASH_CRYPT_CNT
。如果 flash 加密实际未启用,那么启用 CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH 选项只是提供了测试的可能性,而不会加密 flash 中的任何内容,即使日志中显示了加密操作。
为此,可使用 bootloader_flash_write()
函数。但是,如果运行应用程序时芯片已启用 flash 加密,或者以 CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH 选项创建了启动加载程序,则 flash 加密/解密操作会正常进行。这意味着数据写入加密 flash 分区时被加密,从加密分区读取时被解密。
espefuse.py
esptool 中包含一个用于读取/写入 ESP32-C3 eFuse 位的有用工具: espefuse.py。
idf.py
命令也可以直接提供上述工具的部分功能。例如,运行 idf.py efuse-summary
命令,效果等同于 espefuse.py summary
。
idf.py efuse-summary
Executing action: efuse-summary
(...)
EFUSE_NAME (Block) Description = [Meaningful Value] [Readable/Writeable] (Hex Value)
----------------------------------------------------------------------------------------
Calibration fuses:
K_RTC_LDO (BLOCK1) BLOCK1 K_RTC_LDO = -36 R/W (0b1001001)
K_DIG_LDO (BLOCK1) BLOCK1 K_DIG_LDO = -64 R/W (0b1010000)
V_RTC_DBIAS20 (BLOCK1) BLOCK1 voltage of rtc dbias20 = -40 R/W (0x8a)
V_DIG_DBIAS20 (BLOCK1) BLOCK1 voltage of digital dbias20 = -76 R/W (0x93)
DIG_DBIAS_HVT (BLOCK1) BLOCK1 digital dbias when hvt = -28 R/W (0b10111)
THRES_HVT (BLOCK1) BLOCK1 pvt threshold when hvt = 2000 R/W (0b0111110100)
TEMP_CALIB (BLOCK2) Temperature calibration data = -7.2 R/W (0b101001000)
OCODE (BLOCK2) ADC OCode = 78 R/W (0x4e)
ADC1_INIT_CODE_ATTEN0 (BLOCK2) ADC1 init code at atten0 = 1560 R/W (0b0110000110)
ADC1_INIT_CODE_ATTEN1 (BLOCK2) ADC1 init code at atten1 = -108 R/W (0b1000011011)
ADC1_INIT_CODE_ATTEN2 (BLOCK2) ADC1 init code at atten2 = -232 R/W (0b1000111010)
ADC1_INIT_CODE_ATTEN3 (BLOCK2) ADC1 init code at atten3 = -696 R/W (0b1010101110)
ADC1_CAL_VOL_ATTEN0 (BLOCK2) ADC1 calibration voltage at atten0 = -212 R/W (0b1000110101)
ADC1_CAL_VOL_ATTEN1 (BLOCK2) ADC1 calibration voltage at atten1 = 52 R/W (0b0000001101)
ADC1_CAL_VOL_ATTEN2 (BLOCK2) ADC1 calibration voltage at atten2 = -152 R/W (0b1000100110)
ADC1_CAL_VOL_ATTEN3 (BLOCK2) ADC1 calibration voltage at atten3 = -284 R/W (0b1001000111)
Config fuses:
WR_DIS (BLOCK0) Disable programming of individual eFuses = 0 R/W (0x00000000)
RD_DIS (BLOCK0) Disable reading from BlOCK4-10 = 0 R/W (0b0000000)
DIS_ICACHE (BLOCK0) Set this bit to disable Icache = False R/W (0b0)
DIS_TWAI (BLOCK0) Set this bit to disable CAN function = False R/W (0b0)
DIS_DIRECT_BOOT (BLOCK0) Disable direct boot mode = False R/W (0b0)
UART_PRINT_CONTROL (BLOCK0) Set the default UARTboot message output mode = Enable R/W (0b00)
ERR_RST_ENABLE (BLOCK0) Use BLOCK0 to check error record registers = with check R/W (0b1)
BLOCK_USR_DATA (BLOCK3) User data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_SYS_DATA2 (BLOCK10) System data part 2 (reserved)
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
Flash fuses:
FLASH_TPUW (BLOCK0) Configures flash waiting time after power-up; in u = 0 R/W (0x0)
nit of ms. If the value is less than 15; the waiti
ng time is the configurable value; Otherwise; the
waiting time is twice the configurable value
FORCE_SEND_RESUME (BLOCK0) Set this bit to force ROM code to send a resume co = False R/W (0b0)
mmand during SPI boot
Identity fuses:
DISABLE_WAFER_VERSION_MAJOR (BLOCK0) Disables check of wafer version major = False R/W (0b0)
DISABLE_BLK_VERSION_MAJOR (BLOCK0) Disables check of blk version major = False R/W (0b0)
WAFER_VERSION_MINOR_LO (BLOCK1) WAFER_VERSION_MINOR least significant bits = 3 R/W (0b011)
PKG_VERSION (BLOCK1) Package version = 0 R/W (0b000)
BLK_VERSION_MINOR (BLOCK1) BLK_VERSION_MINOR = 2 R/W (0b010)
WAFER_VERSION_MINOR_HI (BLOCK1) WAFER_VERSION_MINOR most significant bit = False R/W (0b0)
WAFER_VERSION_MAJOR (BLOCK1) WAFER_VERSION_MAJOR = 0 R/W (0b00)
OPTIONAL_UNIQUE_ID (BLOCK2) Optional unique 128-bit ID
= 25 60 04 96 c3 fd 41 6f be ed 2c 51 1d e3 7e 21 R/W
BLK_VERSION_MAJOR (BLOCK2) BLK_VERSION_MAJOR of BLOCK2 = With calibration R/W (0b01)
WAFER_VERSION_MINOR (BLOCK0) calc WAFER VERSION MINOR = WAFER_VERSION_MINOR_HI = 3 R/W (0x3)
<< 3 + WAFER_VERSION_MINOR_LO (read only)
Jtag fuses:
SOFT_DIS_JTAG (BLOCK0) Set these bits to disable JTAG in the soft way (od = 0 R/W (0b000)
d number 1 means disable ). JTAG can be enabled in
HMAC module
DIS_PAD_JTAG (BLOCK0) Set this bit to disable JTAG in the hard way. JTAG = False R/W (0b0)
is disabled permanently
Mac fuses:
MAC (BLOCK1) MAC address
= 58:cf:79:0f:96:8c (OK) R/W
CUSTOM_MAC (BLOCK3) Custom MAC address
= 00:00:00:00:00:00 (OK) R/W
Security fuses:
DIS_DOWNLOAD_ICACHE (BLOCK0) Set this bit to disable Icache in download mode (b = False R/W (0b0)
oot_mode[3:0] is 0; 1; 2; 3; 6; 7)
DIS_FORCE_DOWNLOAD (BLOCK0) Set this bit to disable the function that forces c = False R/W (0b0)
hip into download mode
DIS_DOWNLOAD_MANUAL_ENCRYPT (BLOCK0) Set this bit to disable flash encryption when in = False R/W (0b0)
download boot modes
SPI_BOOT_CRYPT_CNT (BLOCK0) Enables flash encryption when 1 or 3 bits are set = Disable R/W (0b000)
and disables otherwise
SECURE_BOOT_KEY_REVOKE0 (BLOCK0) Revoke 1st secure boot key = False R/W (0b0)
SECURE_BOOT_KEY_REVOKE1 (BLOCK0) Revoke 2nd secure boot key = False R/W (0b0)
SECURE_BOOT_KEY_REVOKE2 (BLOCK0) Revoke 3rd secure boot key = False R/W (0b0)
KEY_PURPOSE_0 (BLOCK0) Purpose of Key0 = USER R/W (0x0)
KEY_PURPOSE_1 (BLOCK0) Purpose of Key1 = USER R/W (0x0)
KEY_PURPOSE_2 (BLOCK0) Purpose of Key2 = USER R/W (0x0)
KEY_PURPOSE_3 (BLOCK0) Purpose of Key3 = USER R/W (0x0)
KEY_PURPOSE_4 (BLOCK0) Purpose of Key4 = USER R/W (0x0)
KEY_PURPOSE_5 (BLOCK0) Purpose of Key5 = USER R/W (0x0)
SECURE_BOOT_EN (BLOCK0) Set this bit to enable secure boot = False R/W (0b0)
SECURE_BOOT_AGGRESSIVE_REVOKE (BLOCK0) Set this bit to enable revoking aggressive secure = False R/W (0b0)
boot
DIS_DOWNLOAD_MODE (BLOCK0) Set this bit to disable download mode (boot_mode[3 = False R/W (0b0)
:0] = 0; 1; 2; 3; 6; 7)
ENABLE_SECURITY_DOWNLOAD (BLOCK0) Set this bit to enable secure UART download mode = False R/W (0b0)
SECURE_VERSION (BLOCK0) Secure version (used by ESP-IDF anti-rollback = 0 R/W (0x0000)
feature)
BLOCK_KEY0 (BLOCK4)
Purpose: USER
Key0 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_KEY1 (BLOCK5)
Purpose: USER
Key1 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_KEY2 (BLOCK6)
Purpose: USER
Key2 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_KEY3 (BLOCK7)
Purpose: USER
Key3 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_KEY4 (BLOCK8)
Purpose: USER
Key4 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLOCK_KEY5 (BLOCK9)
Purpose: USER
Key5 or user data
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
Spi Pad fuses:
SPI_PAD_CONFIG_CLK (BLOCK1) SPI PAD CLK = 0 R/W (0b000000)
SPI_PAD_CONFIG_Q (BLOCK1) SPI PAD Q(D1) = 0 R/W (0b000000)
SPI_PAD_CONFIG_D (BLOCK1) SPI PAD D(D0) = 0 R/W (0b000000)
SPI_PAD_CONFIG_CS (BLOCK1) SPI PAD CS = 0 R/W (0b000000)
SPI_PAD_CONFIG_HD (BLOCK1) SPI PAD HD(D3) = 0 R/W (0b000000)
SPI_PAD_CONFIG_WP (BLOCK1) SPI PAD WP(D2) = 0 R/W (0b000000)
SPI_PAD_CONFIG_DQS (BLOCK1) SPI PAD DQS = 0 R/W (0b000000)
SPI_PAD_CONFIG_D4 (BLOCK1) SPI PAD D4 = 0 R/W (0b000000)
SPI_PAD_CONFIG_D5 (BLOCK1) SPI PAD D5 = 0 R/W (0b000000)
SPI_PAD_CONFIG_D6 (BLOCK1) SPI PAD D6 = 0 R/W (0b000000)
SPI_PAD_CONFIG_D7 (BLOCK1) SPI PAD D7 = 0 R/W (0b000000)
Usb fuses:
DIS_USB_JTAG (BLOCK0) Set this bit to disable function of usb switch to = False R/W (0b0)
jtag in module of usb device
DIS_USB_SERIAL_JTAG (BLOCK0) USB-Serial-JTAG = Enable R/W (0b0)
USB_EXCHG_PINS (BLOCK0) Set this bit to exchange USB D+ and D- pins = False R/W (0b0)
DIS_USB_SERIAL_JTAG_ROM_PRINT (BLOCK0) USB printing = Enable R/W (0b0)
DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE (BLOCK0) Disable UART download mode through USB-Serial-JTAG = False R/W (0b0)
Vdd fuses:
VDD_SPI_AS_GPIO (BLOCK0) Set this bit to vdd spi pin function as gpio = False R/W (0b0)
Wdt fuses:
WDT_DELAY_SEL (BLOCK0) RTC watchdog timeout threshold; in unit of slow cl = 40000 R/W (0b00)
ock cycle
获取所有 eFuse 寄存器的转储数据。
idf.py efuse-dump
Executing action: efuse-dump
Running espefuse.py in directory <project-directory>
Executing "espefuse.py dump --chip esp32c3"...
espefuse.py v4.6-dev
Connecting....
BLOCK0 ( ) [0 ] read_regs: 00000000 00000000 00000000 00000000 80000000 00000000
MAC_SPI_8M_0 (BLOCK1 ) [1 ] read_regs: 790f968c 000058cf 00000000 020c0000 715424e0 0047d2f2
BLOCK_SYS_DATA (BLOCK2 ) [2 ] read_regs: 96046025 6f41fdc3 512cedbe 217ee31d d864ea41 5aba3a86 1e260363 00000009
BLOCK_USR_DATA (BLOCK3 ) [3 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY0 (BLOCK4 ) [4 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY1 (BLOCK5 ) [5 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY2 (BLOCK6 ) [6 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY3 (BLOCK7 ) [7 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY4 (BLOCK8 ) [8 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_KEY5 (BLOCK9 ) [9 ] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK_SYS_DATA2 (BLOCK10 ) [10] read_regs: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
BLOCK0 ( ) [0 ] err__regs: 00000000 00000000 00000000 00000000 00000000 00000000
EFUSE_RD_RS_ERR0_REG 0x00000000
EFUSE_RD_RS_ERR1_REG 0x00000000
=== Run "dump" command ===
应用示例
system/efuse 演示了如何在 ESP32-C3 上使用 eFuse API,展示了从通用和自定义 eFuse 表中读取和写入字段的操作,并解释了虚拟 eFuse 在调试中的用途。
API 参考
Header File
This header file can be included with:
#include "esp_efuse_chip.h"
This header file is a part of the API provided by the
efuse
component. To declare that your component depends onefuse
, add the following to your CMakeLists.txt:REQUIRES efuse
or
PRIV_REQUIRES efuse
Enumerations
-
enum esp_efuse_block_t
Type of eFuse blocks ESP32C3.
Values:
-
enumerator EFUSE_BLK0
Number of eFuse BLOCK0. REPEAT_DATA
-
enumerator EFUSE_BLK1
Number of eFuse BLOCK1. MAC_SPI_8M_SYS
-
enumerator EFUSE_BLK2
Number of eFuse BLOCK2. SYS_DATA_PART1
-
enumerator EFUSE_BLK_SYS_DATA_PART1
Number of eFuse BLOCK2. SYS_DATA_PART1
-
enumerator EFUSE_BLK3
Number of eFuse BLOCK3. USER_DATA
-
enumerator EFUSE_BLK_USER_DATA
Number of eFuse BLOCK3. USER_DATA
-
enumerator EFUSE_BLK4
Number of eFuse BLOCK4. KEY0
-
enumerator EFUSE_BLK_KEY0
Number of eFuse BLOCK4. KEY0
-
enumerator EFUSE_BLK5
Number of eFuse BLOCK5. KEY1
-
enumerator EFUSE_BLK_KEY1
Number of eFuse BLOCK5. KEY1
-
enumerator EFUSE_BLK6
Number of eFuse BLOCK6. KEY2
-
enumerator EFUSE_BLK_KEY2
Number of eFuse BLOCK6. KEY2
-
enumerator EFUSE_BLK7
Number of eFuse BLOCK7. KEY3
-
enumerator EFUSE_BLK_KEY3
Number of eFuse BLOCK7. KEY3
-
enumerator EFUSE_BLK8
Number of eFuse BLOCK8. KEY4
-
enumerator EFUSE_BLK_KEY4
Number of eFuse BLOCK8. KEY4
-
enumerator EFUSE_BLK9
Number of eFuse BLOCK9. KEY5
-
enumerator EFUSE_BLK_KEY5
Number of eFuse BLOCK9. KEY5
-
enumerator EFUSE_BLK_KEY_MAX
-
enumerator EFUSE_BLK10
Number of eFuse BLOCK10. SYS_DATA_PART2
-
enumerator EFUSE_BLK_SYS_DATA_PART2
Number of eFuse BLOCK10. SYS_DATA_PART2
-
enumerator EFUSE_BLK_MAX
-
enumerator EFUSE_BLK0
-
enum esp_efuse_coding_scheme_t
Type of coding scheme.
Values:
-
enumerator EFUSE_CODING_SCHEME_NONE
None
-
enumerator EFUSE_CODING_SCHEME_RS
Reed-Solomon coding
-
enumerator EFUSE_CODING_SCHEME_NONE
-
enum esp_efuse_purpose_t
Type of key purpose.
Values:
-
enumerator ESP_EFUSE_KEY_PURPOSE_USER
User purposes (software-only use)
-
enumerator ESP_EFUSE_KEY_PURPOSE_RESERVED
Reserved
-
enumerator ESP_EFUSE_KEY_PURPOSE_XTS_AES_128_KEY
XTS_AES_128_KEY (flash/PSRAM encryption)
-
enumerator ESP_EFUSE_KEY_PURPOSE_HMAC_DOWN_ALL
HMAC Downstream mode
-
enumerator ESP_EFUSE_KEY_PURPOSE_HMAC_DOWN_JTAG
JTAG soft enable key (uses HMAC Downstream mode)
-
enumerator ESP_EFUSE_KEY_PURPOSE_HMAC_DOWN_DIGITAL_SIGNATURE
Digital Signature peripheral key (uses HMAC Downstream mode)
-
enumerator ESP_EFUSE_KEY_PURPOSE_HMAC_UP
HMAC Upstream mode
-
enumerator ESP_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST0
SECURE_BOOT_DIGEST0 (Secure Boot key digest)
-
enumerator ESP_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST1
SECURE_BOOT_DIGEST1 (Secure Boot key digest)
-
enumerator ESP_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST2
SECURE_BOOT_DIGEST2 (Secure Boot key digest)
-
enumerator ESP_EFUSE_KEY_PURPOSE_MAX
MAX PURPOSE
-
enumerator ESP_EFUSE_KEY_PURPOSE_USER
Header File
This header file can be included with:
#include "esp_efuse.h"
This header file is a part of the API provided by the
efuse
component. To declare that your component depends onefuse
, add the following to your CMakeLists.txt:REQUIRES efuse
or
PRIV_REQUIRES efuse
Functions
-
esp_err_t esp_efuse_read_field_blob(const esp_efuse_desc_t *field[], void *dst, size_t dst_size_bits)
Reads bits from EFUSE field and writes it into an array.
The number of read bits will be limited to the minimum value from the description of the bits in "field" structure or "dst_size_bits" required size. Use "esp_efuse_get_field_size()" function to determine the length of the field.
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
dst -- [out] A pointer to array that will contain the result of reading.
dst_size_bits -- [in] The number of bits required to read. If the requested number of bits is greater than the field, the number will be limited to the field size.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
-
bool esp_efuse_read_field_bit(const esp_efuse_desc_t *field[])
Read a single bit eFuse field as a boolean value.
备注
The value must exist and must be a single bit wide. If there is any possibility of an error in the provided arguments, call esp_efuse_read_field_blob() and check the returned value instead.
备注
If assertions are enabled and the parameter is invalid, execution will abort
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
- 返回
true: The field parameter is valid and the bit is set.
false: The bit is not set, or the parameter is invalid and assertions are disabled.
-
esp_err_t esp_efuse_read_field_cnt(const esp_efuse_desc_t *field[], size_t *out_cnt)
Reads bits from EFUSE field and returns number of bits programmed as "1".
If the bits are set not sequentially, they will still be counted.
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
out_cnt -- [out] A pointer that will contain the number of programmed as "1" bits.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
-
esp_err_t esp_efuse_write_field_blob(const esp_efuse_desc_t *field[], const void *src, size_t src_size_bits)
Writes array to EFUSE field.
The number of write bits will be limited to the minimum value from the description of the bits in "field" structure or "src_size_bits" required size. Use "esp_efuse_get_field_size()" function to determine the length of the field. After the function is completed, the writing registers are cleared.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
src -- [in] A pointer to array that contains the data for writing.
src_size_bits -- [in] The number of bits required to write.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_efuse_write_field_cnt(const esp_efuse_desc_t *field[], size_t cnt)
Writes a required count of bits as "1" to EFUSE field.
If there are no free bits in the field to set the required number of bits to "1", ESP_ERR_EFUSE_CNT_IS_FULL error is returned, the field will not be partially recorded. After the function is completed, the writing registers are cleared.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
cnt -- [in] Required number of programmed as "1" bits.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
-
esp_err_t esp_efuse_write_field_bit(const esp_efuse_desc_t *field[])
Write a single bit eFuse field to 1.
For use with eFuse fields that are a single bit. This function will write the bit to value 1 if it is not already set, or does nothing if the bit is already set.
This is equivalent to calling esp_efuse_write_field_cnt() with the cnt parameter equal to 1, except that it will return ESP_OK if the field is already set to 1.
- 参数
field -- [in] Pointer to the structure describing the efuse field.
- 返回
ESP_OK: The operation was successfully completed, or the bit was already set to value 1.
ESP_ERR_INVALID_ARG: Error in the passed arugments, including if the efuse field is not 1 bit wide.
-
esp_err_t esp_efuse_set_write_protect(esp_efuse_block_t blk)
Sets a write protection for the whole block.
After that, it is impossible to write to this block. The write protection does not apply to block 0.
- 参数
blk -- [in] Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
ESP_ERR_NOT_SUPPORTED: The block does not support this command.
-
esp_err_t esp_efuse_set_read_protect(esp_efuse_block_t blk)
Sets a read protection for the whole block.
After that, it is impossible to read from this block. The read protection does not apply to block 0.
- 参数
blk -- [in] Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
ESP_ERR_NOT_SUPPORTED: The block does not support this command.
-
int esp_efuse_get_field_size(const esp_efuse_desc_t *field[])
Returns the number of bits used by field.
- 参数
field -- [in] A pointer to the structure describing the fields of efuse.
- 返回
Returns the number of bits used by field.
-
uint32_t esp_efuse_read_reg(esp_efuse_block_t blk, unsigned int num_reg)
Returns value of efuse register.
This is a thread-safe implementation. Example: EFUSE_BLK2_RDATA3_REG where (blk=2, num_reg=3)
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 参数
blk -- [in] Block number of eFuse.
num_reg -- [in] The register number in the block.
- 返回
Value of register
-
esp_err_t esp_efuse_write_reg(esp_efuse_block_t blk, unsigned int num_reg, uint32_t val)
Write value to efuse register.
Apply a coding scheme if necessary. This is a thread-safe implementation. Example: EFUSE_BLK3_WDATA0_REG where (blk=3, num_reg=0)
- 参数
blk -- [in] Block number of eFuse.
num_reg -- [in] The register number in the block.
val -- [in] Value to write.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
-
esp_efuse_coding_scheme_t esp_efuse_get_coding_scheme(esp_efuse_block_t blk)
Return efuse coding scheme for blocks.
备注
The coding scheme is applicable only to 1, 2 and 3 blocks. For 0 block, the coding scheme is always
NONE
.- 参数
blk -- [in] Block number of eFuse.
- 返回
Return efuse coding scheme for blocks
-
esp_err_t esp_efuse_read_block(esp_efuse_block_t blk, void *dst_key, size_t offset_in_bits, size_t size_bits)
Read key to efuse block starting at the offset and the required size.
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 参数
blk -- [in] Block number of eFuse.
dst_key -- [in] A pointer to array that will contain the result of reading.
offset_in_bits -- [in] Start bit in block.
size_bits -- [in] The number of bits required to read.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_efuse_write_block(esp_efuse_block_t blk, const void *src_key, size_t offset_in_bits, size_t size_bits)
Write key to efuse block starting at the offset and the required size.
- 参数
blk -- [in] Block number of eFuse.
src_key -- [in] A pointer to array that contains the key for writing.
offset_in_bits -- [in] Start bit in block.
size_bits -- [in] The number of bits required to write.
- 返回
ESP_OK: The operation was successfully completed.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits
-
uint32_t esp_efuse_get_pkg_ver(void)
Returns chip package from efuse.
- 返回
chip package
-
void esp_efuse_reset(void)
Reset efuse write registers.
Efuse write registers are written to zero, to negate any changes that have been staged here.
备注
This function is not threadsafe, if calling code updates efuse values from multiple tasks then this is caller's responsibility to serialise.
-
esp_err_t esp_efuse_disable_rom_download_mode(void)
Disable ROM Download Mode via eFuse.
Permanently disables the ROM Download Mode feature. Once disabled, if the SoC is booted with strapping pins set for ROM Download Mode then an error is printed instead.
备注
Not all SoCs support this option. An error will be returned if called on an ESP32 with a silicon revision lower than 3, as these revisions do not support this option.
备注
If ROM Download Mode is already disabled, this function does nothing and returns success.
- 返回
ESP_OK If the eFuse was successfully burned, or had already been burned.
ESP_ERR_NOT_SUPPORTED (ESP32 only) This SoC is not capable of disabling UART download mode
ESP_ERR_INVALID_STATE (ESP32 only) This eFuse is write protected and cannot be written
-
esp_err_t esp_efuse_set_rom_log_scheme(esp_efuse_rom_log_scheme_t log_scheme)
Set boot ROM log scheme via eFuse.
备注
By default, the boot ROM will always print to console. This API can be called to set the log scheme only once per chip, once the value is changed from the default it can't be changed again.
- 参数
log_scheme -- Supported ROM log scheme
- 返回
ESP_OK If the eFuse was successfully burned, or had already been burned.
ESP_ERR_NOT_SUPPORTED (ESP32 only) This SoC is not capable of setting ROM log scheme
ESP_ERR_INVALID_STATE This eFuse is write protected or has been burned already
-
esp_err_t esp_efuse_enable_rom_secure_download_mode(void)
Switch ROM Download Mode to Secure Download mode via eFuse.
Permanently enables Secure Download mode. This mode limits the use of ROM Download Mode functions to simple flash read, write and erase operations, plus a command to return a summary of currently enabled security features.
备注
If Secure Download mode is already enabled, this function does nothing and returns success.
备注
Disabling the ROM Download Mode also disables Secure Download Mode.
- 返回
ESP_OK If the eFuse was successfully burned, or had already been burned.
ESP_ERR_INVALID_STATE ROM Download Mode has been disabled via eFuse, so Secure Download mode is unavailable.
-
uint32_t esp_efuse_read_secure_version(void)
Return secure_version from efuse field.
- 返回
Secure version from efuse field
-
bool esp_efuse_check_secure_version(uint32_t secure_version)
Check secure_version from app and secure_version and from efuse field.
- 参数
secure_version -- Secure version from app.
- 返回
True: If version of app is equal or more then secure_version from efuse.
-
esp_err_t esp_efuse_update_secure_version(uint32_t secure_version)
Write efuse field by secure_version value.
Update the secure_version value is available if the coding scheme is None. Note: Do not use this function in your applications. This function is called as part of the other API.
- 参数
secure_version -- [in] Secure version from app.
- 返回
ESP_OK: Successful.
ESP_FAIL: secure version of app cannot be set to efuse field.
ESP_ERR_NOT_SUPPORTED: Anti rollback is not supported with the 3/4 and Repeat coding scheme.
-
esp_err_t esp_efuse_batch_write_begin(void)
Set the batch mode of writing fields.
This mode allows you to write the fields in the batch mode when need to burn several efuses at one time. To enable batch mode call begin() then perform as usually the necessary operations read and write and at the end call commit() to actually burn all written efuses. The batch mode can be used nested. The commit will be done by the last commit() function. The number of begin() functions should be equal to the number of commit() functions.
Note: If batch mode is enabled by the first task, at this time the second task cannot write/read efuses. The second task will wait for the first task to complete the batch operation.
// Example of using the batch writing mode. // set the batch writing mode esp_efuse_batch_write_begin(); // use any writing functions as usual esp_efuse_write_field_blob(ESP_EFUSE_...); esp_efuse_write_field_cnt(ESP_EFUSE_...); esp_efuse_set_write_protect(EFUSE_BLKx); esp_efuse_write_reg(EFUSE_BLKx, ...); esp_efuse_write_block(EFUSE_BLKx, ...); esp_efuse_write(ESP_EFUSE_1, 3); // ESP_EFUSE_1 == 1, here we write a new value = 3. The changes will be burn by the commit() function. esp_efuse_read_...(ESP_EFUSE_1); // this function returns ESP_EFUSE_1 == 1 because uncommitted changes are not readable, it will be available only after commit. ... // esp_efuse_batch_write APIs can be called recursively. esp_efuse_batch_write_begin(); esp_efuse_set_write_protect(EFUSE_BLKx); esp_efuse_batch_write_commit(); // the burn will be skipped here, it will be done in the last commit(). ... // Write all of these fields to the efuse registers esp_efuse_batch_write_commit(); esp_efuse_read_...(ESP_EFUSE_1); // this function returns ESP_EFUSE_1 == 3.
备注
Please note that reading in the batch mode does not show uncommitted changes.
- 返回
ESP_OK: Successful.
-
esp_err_t esp_efuse_batch_write_cancel(void)
Reset the batch mode of writing fields.
It will reset the batch writing mode and any written changes.
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_STATE: Tha batch mode was not set.
-
esp_err_t esp_efuse_batch_write_commit(void)
Writes all prepared data for the batch mode.
Must be called to ensure changes are written to the efuse registers. After this the batch writing mode will be reset.
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_STATE: The deferred writing mode was not set.
-
bool esp_efuse_block_is_empty(esp_efuse_block_t block)
Checks that the given block is empty.
- 返回
True: The block is empty.
False: The block is not empty or was an error.
-
bool esp_efuse_get_key_dis_read(esp_efuse_block_t block)
Returns a read protection for the key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
True: The key block is read protected False: The key block is readable.
-
esp_err_t esp_efuse_set_key_dis_read(esp_efuse_block_t block)
Sets a read protection for the key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
bool esp_efuse_get_key_dis_write(esp_efuse_block_t block)
Returns a write protection for the key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
True: The key block is write protected False: The key block is writeable.
-
esp_err_t esp_efuse_set_key_dis_write(esp_efuse_block_t block)
Sets a write protection for the key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
bool esp_efuse_key_block_unused(esp_efuse_block_t block)
Returns true if the key block is unused, false otherwise.
An unused key block is all zero content, not read or write protected, and has purpose 0 (ESP_EFUSE_KEY_PURPOSE_USER)
- 参数
block -- key block to check.
- 返回
True if key block is unused,
False if key block is used or the specified block index is not a key block.
-
bool esp_efuse_find_purpose(esp_efuse_purpose_t purpose, esp_efuse_block_t *block)
Find a key block with the particular purpose set.
- 参数
purpose -- [in] Purpose to search for.
block -- [out] Pointer in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX which will be set to the key block if found. Can be NULL, if only need to test the key block exists.
- 返回
True: If found,
False: If not found (value at block pointer is unchanged).
-
bool esp_efuse_get_keypurpose_dis_write(esp_efuse_block_t block)
Returns a write protection of the key purpose field for an efuse key block.
备注
For ESP32: no keypurpose, it returns always True.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
True: The key purpose is write protected. False: The key purpose is writeable.
-
esp_efuse_purpose_t esp_efuse_get_key_purpose(esp_efuse_block_t block)
Returns the current purpose set for an efuse key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
Value: If Successful, it returns the value of the purpose related to the given key block.
ESP_EFUSE_KEY_PURPOSE_MAX: Otherwise.
-
const esp_efuse_desc_t **esp_efuse_get_purpose_field(esp_efuse_block_t block)
Returns a pointer to a key purpose for an efuse key block.
To get the value of this field use esp_efuse_read_field_blob() or esp_efuse_get_key_purpose().
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
Pointer: If Successful returns a pointer to the corresponding efuse field otherwise NULL.
-
const esp_efuse_desc_t **esp_efuse_get_key(esp_efuse_block_t block)
Returns a pointer to a key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
Pointer: If Successful returns a pointer to the corresponding efuse field otherwise NULL.
-
esp_err_t esp_efuse_set_key_purpose(esp_efuse_block_t block, esp_efuse_purpose_t purpose)
Sets a key purpose for an efuse key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
purpose -- [in] Key purpose.
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_efuse_set_keypurpose_dis_write(esp_efuse_block_t block)
Sets a write protection of the key purpose field for an efuse key block.
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_efuse_block_t esp_efuse_find_unused_key_block(void)
Search for an unused key block and return the first one found.
See esp_efuse_key_block_unused for a description of an unused key block.
- 返回
First unused key block, or EFUSE_BLK_KEY_MAX if no unused key block is found.
-
unsigned esp_efuse_count_unused_key_blocks(void)
Return the number of unused efuse key blocks in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX.
-
bool esp_efuse_get_digest_revoke(unsigned num_digest)
Returns the status of the Secure Boot public key digest revocation bit.
- 参数
num_digest -- [in] The number of digest in range 0..2
- 返回
True: If key digest is revoked,
False; If key digest is not revoked.
-
esp_err_t esp_efuse_set_digest_revoke(unsigned num_digest)
Sets the Secure Boot public key digest revocation bit.
- 参数
num_digest -- [in] The number of digest in range 0..2
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
bool esp_efuse_get_write_protect_of_digest_revoke(unsigned num_digest)
Returns a write protection of the Secure Boot public key digest revocation bit.
- 参数
num_digest -- [in] The number of digest in range 0..2
- 返回
True: The revocation bit is write protected. False: The revocation bit is writeable.
-
esp_err_t esp_efuse_set_write_protect_of_digest_revoke(unsigned num_digest)
Sets a write protection of the Secure Boot public key digest revocation bit.
- 参数
num_digest -- [in] The number of digest in range 0..2
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_efuse_write_key(esp_efuse_block_t block, esp_efuse_purpose_t purpose, const void *key, size_t key_size_bytes)
Program a block of key data to an efuse block.
The burn of a key, protection bits, and a purpose happens in batch mode.
备注
This API also enables the read protection efuse bit for certain key blocks like XTS-AES, HMAC, ECDSA etc. This ensures that the key is only accessible to hardware peripheral.
备注
For SoC's with capability
SOC_EFUSE_ECDSA_USE_HARDWARE_K
(e.g., ESP32-H2), this API writes an additional efuse bit for ECDSA key purpose to enforce hardware TRNG generated k mode in the peripheral.- 参数
block -- [in] Block to read purpose for. Must be in range EFUSE_BLK_KEY0 to EFUSE_BLK_KEY_MAX. Key block must be unused (esp_efuse_key_block_unused).
purpose -- [in] Purpose to set for this key. Purpose must be already unset.
key -- [in] Pointer to data to write.
key_size_bytes -- [in] Bytes length of data to write.
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_INVALID_STATE: Error in efuses state, unused block not found.
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_efuse_write_keys(const esp_efuse_purpose_t purposes[], uint8_t keys[][32], unsigned number_of_keys)
Program keys to unused efuse blocks.
The burn of keys, protection bits, and purposes happens in batch mode.
备注
This API also enables the read protection efuse bit for certain key blocks like XTS-AES, HMAC, ECDSA etc. This ensures that the key is only accessible to hardware peripheral.
备注
For SoC's with capability
SOC_EFUSE_ECDSA_USE_HARDWARE_K
(e.g., ESP32-H2), this API writes an additional efuse bit for ECDSA key purpose to enforce hardware TRNG generated k mode in the peripheral.- 参数
purposes -- [in] Array of purposes (purpose[number_of_keys]).
keys -- [in] Array of keys (uint8_t keys[number_of_keys][32]). Each key is 32 bytes long.
number_of_keys -- [in] The number of keys to write (up to 6 keys).
- 返回
ESP_OK: Successful.
ESP_ERR_INVALID_ARG: Error in the passed arguments.
ESP_ERR_INVALID_STATE: Error in efuses state, unused block not found.
ESP_ERR_NOT_ENOUGH_UNUSED_KEY_BLOCKS: Error not enough unused key blocks available
ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
ESP_ERR_CODING: Error range of data does not match the coding scheme.
-
esp_err_t esp_secure_boot_read_key_digests(esp_secure_boot_key_digests_t *trusted_key_digests)
Read key digests from efuse. Any revoked/missing digests will be marked as NULL.
- 参数
trusted_key_digests -- [out] Trusted keys digests, stored in this parameter after successfully completing this function. The number of digests depends on the SOC's capabilities.
- 返回
ESP_OK: Successful.
ESP_FAIL: If trusted_keys is NULL or there is no valid digest.
-
esp_err_t esp_efuse_check_errors(void)
Checks eFuse errors in BLOCK0.
It does a BLOCK0 check if eFuse EFUSE_ERR_RST_ENABLE is set. If BLOCK0 has an error, it prints the error and returns ESP_FAIL, which should be treated as esp_restart.
备注
Refers to ESP32-C3 only.
- 返回
ESP_OK: No errors in BLOCK0.
ESP_FAIL: Error in BLOCK0 requiring reboot.
-
esp_err_t esp_efuse_destroy_block(esp_efuse_block_t block)
Destroys the data in the given efuse block, if possible.
Data destruction occurs through the following steps: 1) Destroy data in the block:
If write protection is inactive for the block, then unset bits are burned.
If write protection is active, the block remains unaltered. 2) Set read protection for the block if possible (check write-protection for RD_DIS). In this case, data becomes inaccessible, and the software reads it as all zeros. If write protection is enabled and read protection can not be set, data in the block remains readable (returns an error).
Do not use the batch mode with this function as it does the burning itself!
- 参数
block -- [in] A key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY_MAX
- 返回
ESP_OK: Successful.
ESP_FAIL: Data remained readable because the block is write-protected and read protection can not be set.
Structures
-
struct esp_efuse_desc_t
Type definition for an eFuse field.
Public Members
-
esp_efuse_block_t efuse_block
Block of eFuse
-
uint8_t bit_start
Start bit [0..255]
-
uint16_t bit_count
Length of bit field [1..-]
-
esp_efuse_block_t efuse_block
Macros
-
ESP_ERR_EFUSE
Base error code for efuse api.
-
ESP_OK_EFUSE_CNT
OK the required number of bits is set.
-
ESP_ERR_EFUSE_CNT_IS_FULL
Error field is full.
-
ESP_ERR_EFUSE_REPEATED_PROG
Error repeated programming of programmed bits is strictly forbidden.
-
ESP_ERR_CODING
Error while a encoding operation.
-
ESP_ERR_NOT_ENOUGH_UNUSED_KEY_BLOCKS
Error not enough unused key blocks available
-
ESP_ERR_DAMAGED_READING
Error. Burn or reset was done during a reading operation leads to damage read data. This error is internal to the efuse component and not returned by any public API.
Enumerations
-
enum esp_efuse_rom_log_scheme_t
Type definition for ROM log scheme.
Values:
-
enumerator ESP_EFUSE_ROM_LOG_ALWAYS_ON
Always enable ROM logging
-
enumerator ESP_EFUSE_ROM_LOG_ON_GPIO_LOW
ROM logging is enabled when specific GPIO level is low during start up
-
enumerator ESP_EFUSE_ROM_LOG_ON_GPIO_HIGH
ROM logging is enabled when specific GPIO level is high during start up
-
enumerator ESP_EFUSE_ROM_LOG_ALWAYS_OFF
Disable ROM logging permanently
-
enumerator ESP_EFUSE_ROM_LOG_ALWAYS_ON