Logging library¶

Overview¶

The logging library provides two ways for setting log verbosity:

At compile time: in menuconfig, set the verbosity level using the option CONFIG_LOG_DEFAULT_LEVEL. All logging statements for verbosity levels higher than CONFIG_LOG_DEFAULT_LEVEL will be removed by the preprocessor.
At runtime: all logs for verbosity levels lower than CONFIG_LOG_DEFAULT_LEVEL are enabled by default. The function esp_log_level_set() can be used to set a logging level on a per module basis. Modules are identified by their tags, which are human-readable ASCII zero-terminated strings.

There are the following verbosity levels:

Error (lowest)
Warning
Info
Debug
Verbose (highest)

注解

The function esp_log_level_set() cannot set logging levels higher than specified by CONFIG_LOG_DEFAULT_LEVEL. To increase log level for a specific file at compile time, use the macro LOG_LOCAL_LEVEL (see the details below).

How to use this library¶

In each C file that uses logging functionality, define the TAG variable as shown below:

static const char* TAG = "MyModule";

Then use one of logging macros to produce output, e.g:

ESP_LOGW(TAG, "Baud rate error %.1f%%. Requested: %d baud, actual: %d baud", error * 100, baud_req, baud_real);

Several macros are available for different verbosity levels:

ESP_LOGE - error (lowest)
ESP_LOGW - warning
ESP_LOGI - info
ESP_LOGD - debug
ESP_LOGV - verbose (highest)

Additionally, there are ESP_EARLY_LOGx versions for each of these macros, e.g., ESP_EARLY_LOGE. These versions have to be used explicitly in the early startup code only, before heap allocator and syscalls have been initialized. Normal ESP_LOGx macros can also be used while compiling the bootloader, but they will fall back to the same implementation as ESP_EARLY_LOGx macros.

To override default verbosity level at file or component scope, define the LOG_LOCAL_LEVEL macro.

At file scope, define it before including esp_log.h, e.g.:

#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#include "esp_log.h"

At component scope, define it in the component makefile:

CFLAGS += -D LOG_LOCAL_LEVEL=ESP_LOG_DEBUG

To configure logging output per module at runtime, add calls to the function esp_log_level_set() as follows:

esp_log_level_set("*", ESP_LOG_ERROR);        // set all components to ERROR level
esp_log_level_set("wifi", ESP_LOG_WARN);      // enable WARN logs from WiFi stack
esp_log_level_set("dhcpc", ESP_LOG_INFO);     // enable INFO logs from DHCP client

Logging to Host via JTAG¶

By default, the logging library uses the vprintf-like function to write formatted output to the dedicated UART. By calling a simple API, all log output may be routed to JTAG instead, making logging several times faster. For details, please refer to Section 记录日志到主机.

Application Example¶

The logging library is commonly used by most esp-idf components and examples. For demonstration of log functionality, check ESP-IDF’s examples directory. The most revelant examples that deal with logging are the following:

API Reference¶

Header File¶

log/include/esp_log.h

Functions¶

void esp_log_level_set(const char *tag, esp_log_level_t level)¶

Set log level for given tag.

If logging for given component has already been enabled, changes previous setting.

Note that this function can not raise log level above the level set using CONFIG_LOG_DEFAULT_LEVEL setting in menuconfig.

To raise log level above the default one for a given file, define LOG_LOCAL_LEVEL to one of the ESP_LOG_* values, before including esp_log.h in this file.

Parameters

tag: Tag of the log entries to enable. Must be a non-NULL zero terminated string. Value “*” resets log level for all tags to the given value.
level: Selects log level to enable. Only logs at this and lower verbosity levels will be shown.

vprintf_like_t esp_log_set_vprintf(vprintf_like_t func)¶

Set function used to output log entries.

By default, log output goes to UART0. This function can be used to redirect log output to some other destination, such as file or network. Returns the original log handler, which may be necessary to return output to the previous destination.

Return

func old Function used for output.

Parameters

func: new Function used for output. Must have same signature as vprintf.

uint32_t esp_log_timestamp(void)¶

Function which returns timestamp to be used in log output.

This function is used in expansion of ESP_LOGx macros. In the 2nd stage bootloader, and at early application startup stage this function uses CPU cycle counter as time source. Later when FreeRTOS scheduler start running, it switches to FreeRTOS tick count.

For now, we ignore millisecond counter overflow.

Return: timestamp, in milliseconds

uint32_t esp_log_early_timestamp(void)¶

Function which returns timestamp to be used in log output.

This function uses HW cycle counter and does not depend on OS, so it can be safely used after application crash.

Return: timestamp, in milliseconds

void esp_log_write(esp_log_level_t level, const char *tag, const char *format, ...)¶

Write message into the log.

This function is not intended to be used directly. Instead, use one of ESP_LOGE, ESP_LOGW, ESP_LOGI, ESP_LOGD, ESP_LOGV macros.

This function or these macros should not be used from an interrupt.

void esp_log_writev(esp_log_level_t level, const char *tag, const char *format, va_list args)¶

Write message into the log, va_list variant.

This function is provided to ease integration toward other logging framework, so that esp_log can be used as a log sink.

See: esp_log_write()

Macros¶

ESP_LOG_BUFFER_HEX_LEVEL(tag, buffer, buff_len, level)¶

Log a buffer of hex bytes at specified level, separated into 16 bytes each line.

Parameters

tag: description tag
buffer: Pointer to the buffer array
buff_len: length of buffer in bytes
level: level of the log

ESP_LOG_BUFFER_CHAR_LEVEL(tag, buffer, buff_len, level)¶

Log a buffer of characters at specified level, separated into 16 bytes each line. Buffer should contain only printable characters.

Parameters

tag: description tag
buffer: Pointer to the buffer array
buff_len: length of buffer in bytes
level: level of the log

ESP_LOG_BUFFER_HEXDUMP(tag, buffer, buff_len, level)¶

Dump a buffer to the log at specified level.

The dump log shows just like the one below:

 W (195) log_example: 0x3ffb4280   45 53 50 33 32 20 69 73  20 67 72 65 61 74 2c 20  |ESP32 is great, |
 W (195) log_example: 0x3ffb4290   77 6f 72 6b 69 6e 67 20  61 6c 6f 6e 67 20 77 69  |working along wi|
 W (205) log_example: 0x3ffb42a0   74 68 20 74 68 65 20 49  44 46 2e 00              |th the IDF..|

It is highly recommend to use terminals with over 102 text width.

Parameters

tag: description tag
buffer: Pointer to the buffer array
buff_len: length of buffer in bytes
level: level of the log

ESP_LOG_BUFFER_HEX(tag, buffer, buff_len)¶

Log a buffer of hex bytes at Info level.

See

esp_log_buffer_hex_level

Parameters

tag: description tag
buffer: Pointer to the buffer array
buff_len: length of buffer in bytes

ESP_LOG_BUFFER_CHAR(tag, buffer, buff_len)¶

Log a buffer of characters at Info level. Buffer should contain only printable characters.

See

esp_log_buffer_char_level

Parameters

tag: description tag
buffer: Pointer to the buffer array
buff_len: length of buffer in bytes

ESP_EARLY_LOGE(tag, format, ...)¶

macro to output logs in startup code, before heap allocator and syscalls have been initialized. log at ESP_LOG_ERROR level.

See: printf,ESP_LOGE

ESP_EARLY_LOGW(tag, format, ...)¶

macro to output logs in startup code at ESP_LOG_WARN level.

See: ESP_EARLY_LOGE,ESP_LOGE, printf

ESP_EARLY_LOGI(tag, format, ...)¶

macro to output logs in startup code at ESP_LOG_INFO level.

See: ESP_EARLY_LOGE,ESP_LOGE, printf

ESP_EARLY_LOGD(tag, format, ...)¶

macro to output logs in startup code at ESP_LOG_DEBUG level.

See: ESP_EARLY_LOGE,ESP_LOGE, printf

ESP_EARLY_LOGV(tag, format, ...)¶

macro to output logs in startup code at ESP_LOG_VERBOSE level.

See: ESP_EARLY_LOGE,ESP_LOGE, printf

ESP_LOG_EARLY_IMPL(tag, format, log_level, log_tag_letter, ...)¶

ESP_LOGE(tag, format, ...)¶

ESP_LOGW(tag, format, ...)¶

ESP_LOGI(tag, format, ...)¶

ESP_LOGD(tag, format, ...)¶

ESP_LOGV(tag, format, ...)¶

ESP_LOG_LEVEL(level, tag, format, ...)¶

runtime macro to output logs at a specified level.

See

printf

Parameters

tag: tag of the log, which can be used to change the log level by esp_log_level_set at runtime.
level: level of the output log.
format: format of the output log. see printf
...: variables to be replaced into the log. see printf

ESP_LOG_LEVEL_LOCAL(level, tag, format, ...)¶

runtime macro to output logs at a specified level. Also check the level with LOG_LOCAL_LEVEL.

See: printf, ESP_LOG_LEVEL

Type Definitions¶

typedef int (*vprintf_like_t)(const char *, va_list)¶

Enumerations¶

enum esp_log_level_t¶

Log level.

Values:

ESP_LOG_NONE¶: No log output

ESP_LOG_ERROR¶: Critical errors, software module can not recover on its own

ESP_LOG_WARN¶: Error conditions from which recovery measures have been taken

ESP_LOG_INFO¶: Information messages which describe normal flow of events

ESP_LOG_DEBUG¶: Extra information which is not necessary for normal use (values, pointers, sizes, etc).

ESP_LOG_VERBOSE¶: Bigger chunks of debugging information, or frequent messages which can potentially flood the output.

提供有关此文档的反馈