时钟树
ESP32-C6 的时钟子系统用于从一系列根时钟中提取并分配系统/模块时钟。时钟树驱动程序负责维护系统时钟的基本功能,并管理模块时钟间的复杂关系。
本文档首先介绍了根时钟和模块时钟,随后介绍了可供用户调用的时钟树 API,调用这些 API,可以监测模块时钟的运行状态。
简介
本节列出了 ESP32-C6 支持的根时钟和模块时钟的定义,这些定义通常用于驱动程序配置,有助于为外设选择合适的时钟源。
根时钟
根时钟会产生可靠的时钟信号,经各种门、复用器、分频器或倍频器传递,这些时钟信号最终成为 CPU 内核、Wi-Fi、蓝牙、RTC 及外设等功能模块的时钟源。
ESP32-C6 的根时钟列在 soc_root_clk_t
中:
内部 17.5 MHz RC 振荡器 (RC_FAST)
此 RC 振荡器可产生约 17.5 MHz 的时钟信号输出,标识为
RC_FAST_CLK
。在运行时,通过校准,可以计算
RC_FAST_CLK
的实际频率。外部 40 MHz 晶振 (XTAL)
内部 136 kHz RC 振荡器 (RC_SLOW)
此 RC 振荡器产生约 136 kHz 的时钟信号输出,标识为
RC_SLOW_CLK
。在运行时,通过校准,可以计算该时钟信号的实际频率。
外部 32 kHz 晶振 - 可选 (XTAL32K)
XTAL32K_CLK
的时钟源可以是连接到XTAL_32K_P
和XTAL_32K_N
管脚的 32 kHz 晶振,也可以是外部电路生成的 32 kHZ 时钟信号。如果使用外部电路生成的时钟信号,该信号必须连接到XTAL_32K_P
管脚。通过校准,可以计算
XTAL32K_CLK
的实际频率。
外部慢速时钟 - 可选 (OSC_SLOW)
将外部电路生成的时钟信号连接到 GPIO0,可作为
RTC_SLOW_CLK
的时钟源。通过校准,可以计算该时钟信号的实际频率。
内部 32 kHz RC 振荡器 (RC32K)
在运行时,通过校准,可以计算该时钟信号的实际频率。
与晶振产生的信号相比,从 RC 振荡器电路产生的信号通常精度较低,且容易受环境影响。因此,ESP32-C6 为 RTC_SLOW_CLK
提供了几种时钟源选项,可以根据对系统时间精度和对功耗的要求选择。更多详情,请参阅 RTC 定时器时钟源。
模块时钟
ESP32-C6 的可用模块时钟在 soc_module_clk_t
中列出,每个模块时钟都有其唯一 ID。查阅文档中的枚举值,即可获取各模块时钟的详细信息。
使用 API
时钟树驱动程序提供了一个一体化接口,可以获取模块时钟的频率,即 esp_clk_tree_src_get_freq_hz()
。通过该函数,你可以在任何时刻,通过提供时钟名称 soc_module_clk_t
和指定返回频率值的精度级别 esp_clk_tree_src_freq_precision_t
,获取时钟频率。
API 参考
Header File
This header file can be included with:
#include "soc/clk_tree_defs.h"
Macros
-
SOC_CLK_RC_FAST_FREQ_APPROX
Approximate RC_FAST_CLK frequency in Hz
-
SOC_CLK_RC_SLOW_FREQ_APPROX
Approximate RC_SLOW_CLK frequency in Hz
-
SOC_CLK_RC32K_FREQ_APPROX
Approximate RC32K_CLK frequency in Hz
-
SOC_CLK_XTAL32K_FREQ_APPROX
Approximate XTAL32K_CLK frequency in Hz
-
SOC_CLK_OSC_SLOW_FREQ_APPROX
Approximate OSC_SLOW_CLK (external slow clock) frequency in Hz
-
SOC_GPTIMER_CLKS
Array initializer for all supported clock sources of GPTimer.
The following code can be used to iterate all possible clocks:
soc_periph_gptimer_clk_src_t gptimer_clks[] = (soc_periph_gptimer_clk_src_t)SOC_GPTIMER_CLKS; for (size_t i = 0; i< sizeof(gptimer_clks) / sizeof(gptimer_clks[0]); i++) { soc_periph_gptimer_clk_src_t clk = gptimer_clks[i]; // Test GPTimer with the clock `clk` }
-
SOC_RMT_CLKS
Array initializer for all supported clock sources of RMT.
-
SOC_TEMP_SENSOR_CLKS
Array initializer for all supported clock sources of Temperature Sensor.
-
SOC_UART_CLKS
Array initializer for all supported clock sources of UART.
-
SOC_LP_UART_CLKS
Array initializer for all supported clock sources of LP_UART.
-
SOC_MCPWM_TIMER_CLKS
Array initializer for all supported clock sources of MCPWM Timer.
-
SOC_MCPWM_CAPTURE_CLKS
Array initializer for all supported clock sources of MCPWM Capture Timer.
-
SOC_MCPWM_CARRIER_CLKS
Array initializer for all supported clock sources of MCPWM Carrier.
-
SOC_I2S_CLKS
Array initializer for all supported clock sources of I2S.
-
SOC_I2C_CLKS
Array initializer for all supported clock sources of I2C.
-
SOC_LP_I2C_CLKS
Array initializer for all supported clock sources of LP_I2C.
-
SOC_SPI_CLKS
Array initializer for all supported clock sources of SPI.
-
SOC_SDM_CLKS
Array initializer for all supported clock sources of SDM.
-
SOC_GLITCH_FILTER_CLKS
Array initializer for all supported clock sources of Glitch Filter.
-
SOC_TWAI_CLKS
Array initializer for all supported clock sources of TWAI.
-
SOC_ADC_DIGI_CLKS
Array initializer for all supported clock sources of ADC digital controller.
-
SOC_MWDT_CLKS
Array initializer for all supported clock sources of MWDT.
-
SOC_LEDC_CLKS
Array initializer for all supported clock sources of LEDC.
-
SOC_PARLIO_CLKS
Array initializer for all supported clock sources of PARLIO.
Enumerations
-
enum soc_root_clk_t
Root clock.
Values:
-
enumerator SOC_ROOT_CLK_INT_RC_FAST
Internal 17.5MHz RC oscillator
-
enumerator SOC_ROOT_CLK_INT_RC_SLOW
Internal 136kHz RC oscillator
-
enumerator SOC_ROOT_CLK_EXT_XTAL
External 40MHz crystal
-
enumerator SOC_ROOT_CLK_EXT_XTAL32K
External 32kHz crystal
-
enumerator SOC_ROOT_CLK_INT_RC32K
Internal 32kHz RC oscillator
-
enumerator SOC_ROOT_CLK_EXT_OSC_SLOW
External slow clock signal at pin0
-
enumerator SOC_ROOT_CLK_INT_RC_FAST
-
enum soc_cpu_clk_src_t
CPU_CLK mux inputs, which are the supported clock sources for the CPU_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_CPU_CLK_SRC_XTAL
Select XTAL_CLK as CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_PLL
Select PLL_CLK as CPU_CLK source (PLL_CLK is the output of 40MHz crystal oscillator frequency multiplier, 480MHz)
-
enumerator SOC_CPU_CLK_SRC_RC_FAST
Select RC_FAST_CLK as CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_INVALID
Invalid CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_XTAL
-
enum soc_rtc_slow_clk_src_t
RTC_SLOW_CLK mux inputs, which are the supported clock sources for the RTC_SLOW_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW
Select RC_SLOW_CLK as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_XTAL32K
Select XTAL32K_CLK as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC32K
Select RC32K_CLK as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_OSC_SLOW
Select OSC_SLOW_CLK (external slow clock) as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_INVALID
Invalid RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW
-
enum soc_rtc_fast_clk_src_t
RTC_FAST_CLK mux inputs, which are the supported clock sources for the RTC_FAST_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_RTC_FAST_CLK_SRC_RC_FAST
Select RC_FAST_CLK as RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_XTAL_D2
Select XTAL_D2_CLK as RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_XTAL_DIV
Alias name for
SOC_RTC_FAST_CLK_SRC_XTAL_D2
-
enumerator SOC_RTC_FAST_CLK_SRC_INVALID
Invalid RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_RC_FAST
-
enum soc_module_clk_t
Supported clock sources for modules (CPU, peripherals, RTC, etc.)
备注
enum starts from 1, to save 0 for special purpose
Values:
-
enumerator SOC_MOD_CLK_CPU
CPU_CLK can be sourced from XTAL, PLL, or RC_FAST by configuring soc_cpu_clk_src_t
-
enumerator SOC_MOD_CLK_RTC_FAST
RTC_FAST_CLK can be sourced from XTAL_D2 or RC_FAST by configuring soc_rtc_fast_clk_src_t
-
enumerator SOC_MOD_CLK_RTC_SLOW
RTC_SLOW_CLK can be sourced from RC_SLOW, XTAL32K, RC32K, or OSC_SLOW by configuring soc_rtc_slow_clk_src_t
-
enumerator SOC_MOD_CLK_PLL_F80M
PLL_F80M_CLK is derived from PLL (clock gating + fixed divider of 6), it has a fixed frequency of 80MHz
-
enumerator SOC_MOD_CLK_PLL_F160M
PLL_F160M_CLK is derived from PLL (clock gating + fixed divider of 3), it has a fixed frequency of 160MHz
-
enumerator SOC_MOD_CLK_PLL_F240M
PLL_F240M_CLK is derived from PLL (clock gating + fixed divider of 2), it has a fixed frequency of 240MHz
-
enumerator SOC_MOD_CLK_XTAL32K
XTAL32K_CLK comes from the external 32kHz crystal, passing a clock gating to the peripherals
-
enumerator SOC_MOD_CLK_RC_FAST
RC_FAST_CLK comes from the internal 20MHz rc oscillator, passing a clock gating to the peripherals
-
enumerator SOC_MOD_CLK_XTAL
XTAL_CLK comes from the external 40MHz crystal
-
enumerator SOC_MOD_CLK_XTAL_D2
XTAL_D2_CLK comes from the external 40MHz crystal, passing a div of 2 to the LP peripherals
-
enumerator SOC_MOD_CLK_INVALID
Indication of the end of the available module clock sources
-
enumerator SOC_MOD_CLK_CPU
-
enum soc_periph_systimer_clk_src_t
Type of SYSTIMER clock source.
Values:
-
enumerator SYSTIMER_CLK_SRC_XTAL
SYSTIMER source clock is XTAL
-
enumerator SYSTIMER_CLK_SRC_RC_FAST
SYSTIMER source clock is RC_FAST
-
enumerator SYSTIMER_CLK_SRC_DEFAULT
SYSTIMER source clock default choice is XTAL
-
enumerator SYSTIMER_CLK_SRC_XTAL
-
enum soc_periph_gptimer_clk_src_t
Type of GPTimer clock source.
Values:
-
enumerator GPTIMER_CLK_SRC_PLL_F80M
Select PLL_F80M as the source clock
-
enumerator GPTIMER_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator GPTIMER_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator GPTIMER_CLK_SRC_DEFAULT
Select PLL_F80M as the default choice
-
enumerator GPTIMER_CLK_SRC_PLL_F80M
-
enum soc_periph_tg_clk_src_legacy_t
Type of Timer Group clock source, reserved for the legacy timer group driver.
Values:
-
enumerator TIMER_SRC_CLK_PLL_F80M
Timer group clock source is PLL_F80M
-
enumerator TIMER_SRC_CLK_XTAL
Timer group clock source is XTAL
-
enumerator TIMER_SRC_CLK_DEFAULT
Timer group clock source default choice is PLL_F80M
-
enumerator TIMER_SRC_CLK_PLL_F80M
-
enum soc_periph_rmt_clk_src_t
Type of RMT clock source.
Values:
-
enumerator RMT_CLK_SRC_PLL_F80M
Select PLL_F80M as the source clock
-
enumerator RMT_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator RMT_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator RMT_CLK_SRC_DEFAULT
Select PLL_F80M as the default choice
-
enumerator RMT_CLK_SRC_PLL_F80M
-
enum soc_periph_rmt_clk_src_legacy_t
Type of RMT clock source, reserved for the legacy RMT driver.
Values:
-
enumerator RMT_BASECLK_PLL_F80M
RMT source clock is PLL_F80M
-
enumerator RMT_BASECLK_XTAL
RMT source clock is XTAL
-
enumerator RMT_BASECLK_DEFAULT
RMT source clock default choice is PLL_F80M
-
enumerator RMT_BASECLK_PLL_F80M
-
enum soc_periph_temperature_sensor_clk_src_t
Type of Temp Sensor clock source.
Values:
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_DEFAULT
Select XTAL as the default choice
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_XTAL
-
enum soc_periph_uart_clk_src_legacy_t
Type of UART clock source, reserved for the legacy UART driver.
Values:
-
enumerator UART_SCLK_PLL_F80M
UART source clock is PLL_F80M
-
enumerator UART_SCLK_RTC
UART source clock is RC_FAST
-
enumerator UART_SCLK_XTAL
UART source clock is XTAL
-
enumerator UART_SCLK_DEFAULT
UART source clock default choice is PLL_F80M
-
enumerator UART_SCLK_PLL_F80M
-
enum soc_periph_lp_uart_clk_src_t
Type of LP_UART clock source.
Values:
-
enumerator LP_UART_SCLK_LP_FAST
LP_UART source clock is LP(RTC)_FAST
-
enumerator LP_UART_SCLK_XTAL_D2
LP_UART source clock is XTAL_D2
-
enumerator LP_UART_SCLK_DEFAULT
LP_UART source clock default choice is LP(RTC)_FAST
-
enumerator LP_UART_SCLK_LP_FAST
-
enum soc_periph_mcpwm_timer_clk_src_t
Type of MCPWM timer clock source.
Values:
-
enumerator MCPWM_TIMER_CLK_SRC_PLL160M
Select PLL_F160M as the source clock
-
enumerator MCPWM_TIMER_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator MCPWM_TIMER_CLK_SRC_DEFAULT
Select PLL_F160M as the default clock choice
-
enumerator MCPWM_TIMER_CLK_SRC_PLL160M
-
enum soc_periph_mcpwm_capture_clk_src_t
Type of MCPWM capture clock source.
Values:
-
enumerator MCPWM_CAPTURE_CLK_SRC_PLL160M
Select PLL_F160M as the source clock
-
enumerator MCPWM_CAPTURE_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator MCPWM_CAPTURE_CLK_SRC_DEFAULT
Select PLL_F160M as the default clock choice
-
enumerator MCPWM_CAPTURE_CLK_SRC_PLL160M
-
enum soc_periph_mcpwm_carrier_clk_src_t
Type of MCPWM carrier clock source.
Values:
-
enumerator MCPWM_CARRIER_CLK_SRC_PLL160M
Select PLL_F160M as the source clock
-
enumerator MCPWM_CARRIER_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator MCPWM_CARRIER_CLK_SRC_DEFAULT
Select PLL_F160M as the default clock choice
-
enumerator MCPWM_CARRIER_CLK_SRC_PLL160M
-
enum soc_periph_i2s_clk_src_t
I2S clock source enum.
Values:
-
enumerator I2S_CLK_SRC_DEFAULT
Select PLL_F160M as the default source clock
-
enumerator I2S_CLK_SRC_PLL_160M
Select PLL_F160M as the source clock
-
enumerator I2S_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator I2S_CLK_SRC_EXTERNAL
Select external clock as source clock
-
enumerator I2S_CLK_SRC_DEFAULT
-
enum soc_periph_i2c_clk_src_t
Type of I2C clock source.
Values:
-
enumerator I2C_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator I2C_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator I2C_CLK_SRC_DEFAULT
Select XTAL as the default source clock
-
enumerator I2C_CLK_SRC_XTAL
-
enum soc_periph_lp_i2c_clk_src_t
Type of LP_I2C clock source.
Values:
-
enumerator LP_I2C_SCLK_LP_FAST
LP_I2C source clock is RTC_FAST
-
enumerator LP_I2C_SCLK_XTAL_D2
LP_I2C source clock is XTAL_D2
-
enumerator LP_I2C_SCLK_DEFAULT
LP_I2C source clock default choice is RTC_FAST
-
enumerator LP_I2C_SCLK_LP_FAST
-
enum soc_periph_spi_clk_src_t
Type of SPI clock source.
Values:
-
enumerator SPI_CLK_SRC_DEFAULT
Select PLL_80M as SPI source clock
-
enumerator SPI_CLK_SRC_PLL_F80M
Select PLL_80M as SPI source clock
-
enumerator SPI_CLK_SRC_XTAL
Select XTAL as SPI source clock
-
enumerator SPI_CLK_SRC_RC_FAST
Select RC_FAST as SPI source clock
-
enumerator SPI_CLK_SRC_DEFAULT
-
enum soc_periph_sdm_clk_src_t
Sigma Delta Modulator clock source.
Values:
-
enumerator SDM_CLK_SRC_XTAL
Select XTAL clock as the source clock
-
enumerator SDM_CLK_SRC_PLL_F80M
Select PLL_F80M clock as the source clock
-
enumerator SDM_CLK_SRC_DEFAULT
Select PLL_F80M clock as the default clock choice
-
enumerator SDM_CLK_SRC_XTAL
-
enum soc_periph_glitch_filter_clk_src_t
Glitch filter clock source.
Values:
-
enumerator GLITCH_FILTER_CLK_SRC_XTAL
Select XTAL clock as the source clock
-
enumerator GLITCH_FILTER_CLK_SRC_PLL_F80M
Select PLL_F80M clock as the source clock
-
enumerator GLITCH_FILTER_CLK_SRC_DEFAULT
Select PLL_F80M clock as the default clock choice
-
enumerator GLITCH_FILTER_CLK_SRC_XTAL
-
enum soc_periph_twai_clk_src_t
TWAI clock source.
Values:
-
enumerator TWAI_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator TWAI_CLK_SRC_DEFAULT
Select XTAL as the default clock choice
-
enumerator TWAI_CLK_SRC_XTAL
-
enum soc_periph_adc_digi_clk_src_t
ADC digital controller clock source.
Values:
-
enumerator ADC_DIGI_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator ADC_DIGI_CLK_SRC_PLL_F80M
Select PLL_F80M as the source clock
-
enumerator ADC_DIGI_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator ADC_DIGI_CLK_SRC_DEFAULT
Select PLL_F80M as the default clock choice
-
enumerator ADC_DIGI_CLK_SRC_XTAL
-
enum soc_periph_mwdt_clk_src_t
MWDT clock source.
Values:
-
enumerator MWDT_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator MWDT_CLK_SRC_PLL_F80M
Select PLL fixed 80 MHz as the source clock
-
enumerator MWDT_CLK_SRC_RC_FAST
Select RTC fast as the source clock
-
enumerator MWDT_CLK_SRC_DEFAULT
Select PLL fixed 80 MHz as the default clock choice
-
enumerator MWDT_CLK_SRC_XTAL
-
enum soc_periph_ledc_clk_src_legacy_t
Type of LEDC clock source, reserved for the legacy LEDC driver.
Values:
-
enumerator LEDC_AUTO_CLK
LEDC source clock will be automatically selected based on the giving resolution and duty parameter when init the timer
-
enumerator LEDC_USE_PLL_DIV_CLK
Select PLL_F80M clock as the source clock
-
enumerator LEDC_USE_RC_FAST_CLK
Select RC_FAST as the source clock
-
enumerator LEDC_USE_XTAL_CLK
Select XTAL as the source clock
-
enumerator LEDC_USE_RTC8M_CLK
Alias of 'LEDC_USE_RC_FAST_CLK'
-
enumerator LEDC_AUTO_CLK
-
enum soc_periph_parlio_clk_src_t
PARLIO clock source.
Values:
-
enumerator PARLIO_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator PARLIO_CLK_SRC_PLL_F240M
Select PLL_F240M as the source clock
-
enumerator PARLIO_CLK_SRC_DEFAULT
Select PLL_F240M as the default clock choice
-
enumerator PARLIO_CLK_SRC_XTAL
-
enum soc_clkout_sig_id_t
Values:
-
enumerator CLKOUT_SIG_PLL
PLL_CLK is the output of crystal oscillator frequency multiplier
-
enumerator CLKOUT_SIG_XTAL
Main crystal oscillator clock
-
enumerator CLKOUT_SIG_PLL_F80M
From PLL, usually be 80MHz
-
enumerator CLKOUT_SIG_CPU
CPU clock
-
enumerator CLKOUT_SIG_AHB
AHB clock
-
enumerator CLKOUT_SIG_APB
APB clock
-
enumerator CLKOUT_SIG_XTAL32K
External 32kHz crystal clock
-
enumerator CLKOUT_SIG_EXT32K
External slow clock input through XTAL_32K_P
-
enumerator CLKOUT_SIG_RC_FAST
RC fast clock, about 17.5MHz
-
enumerator CLKOUT_SIG_RC_32K
Internal slow RC oscillator
-
enumerator CLKOUT_SIG_RC_SLOW
RC slow clock, depends on the RTC_CLK_SRC configuration
-
enumerator CLKOUT_SIG_INVALID
-
enumerator CLKOUT_SIG_PLL
Header File
This header file can be included with:
#include "esp_clk_tree.h"
Functions
-
esp_err_t esp_clk_tree_src_get_freq_hz(soc_module_clk_t clk_src, esp_clk_tree_src_freq_precision_t precision, uint32_t *freq_value)
Get frequency of module clock source.
- 参数
clk_src -- [in] Clock source available to modules, in soc_module_clk_t
precision -- [in] Degree of precision, one of esp_clk_tree_src_freq_precision_t values This arg only applies to the clock sources that their frequencies can vary: SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_RTC_SLOW, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_RC_FAST_D256, SOC_MOD_CLK_XTAL32K For other clock sources, this field is ignored.
freq_value -- [out] Frequency of the clock source, in Hz
- 返回
ESP_OK Success
ESP_ERR_INVALID_ARG Parameter error
ESP_FAIL Calibration failed
Enumerations
-
enum esp_clk_tree_src_freq_precision_t
Degree of precision of frequency value to be returned by esp_clk_tree_src_get_freq_hz()
Values:
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_APPROX
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_EXACT
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_INVALID
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED