Struct Flex

pub struct Flex<'d> { /* private fields */ }

Flexible pin driver.

This pin driver can act as either input, or output, or both at the same time. The input and output are (not counting the shared pull direction) separately configurable, and they have independent enable states.

Enabling the input stage does not change the output stage, and vice versa. Disabling the input or output stages don’t forget their configuration. Disabling the output stage will not change the output level, but it will disable the driver.

Implementations

impl Flex<'_>

pub async fn wait_for(&mut self, event: Event)

Available on crate feature unstable only.

Wait until the pin experiences a particular Event.

The GPIO driver will disable listening for the event once it occurs, or if the Future is dropped - which also means this method is not cancellation-safe, it will always wait for a future event.

Note that calling this function will overwrite previous listen operations for this pin.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub async fn wait_for_high(&mut self)

Available on crate feature unstable only.

Wait until the pin is high.

See Self::wait_for for more information.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub async fn wait_for_low(&mut self)

Available on crate feature unstable only.

Wait until the pin is low.

See Self::wait_for for more information.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub async fn wait_for_rising_edge(&mut self)

Available on crate feature unstable only.

Wait for the pin to undergo a transition from low to high.

See Self::wait_for for more information.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub async fn wait_for_falling_edge(&mut self)

Available on crate feature unstable only.

Wait for the pin to undergo a transition from high to low.

See Self::wait_for for more information.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub async fn wait_for_any_edge(&mut self)

Available on crate feature unstable only.

Wait for the pin to undergo any transition, i.e low to high OR high to low.

See Self::wait_for for more information.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

impl<'d> Flex<'d>

pub fn new(pin: impl Pin + 'd) -> Self

Available on crate feature unstable only.

Create flexible pin driver for a Pin. No mode change happens.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn apply_input_config(&mut self, config: &InputConfig)

Available on crate feature unstable only.

Applies the given input configuration to the pin.

This function does not set the pin as input (i.e. it does not enable the input buffer). Note that the pull direction is common between the input and output configuration.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn set_input_enable(&mut self, enable_input: bool)

Available on crate feature unstable only.

Enable or disable the GPIO pin input buffer.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_high(&self) -> bool

Available on crate feature unstable only.

Get whether the pin input level is high.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_low(&self) -> bool

Available on crate feature unstable only.

Get whether the pin input level is low.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn level(&self) -> Level

Available on crate feature unstable only.

Get the current pin input level.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn listen(&mut self, event: Event)

Available on crate feature unstable only.

Listen for interrupts.

See Input::listen for more information and an example.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn unlisten(&mut self)

Available on crate feature unstable only.

Stop listening for interrupts.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_listening(&self) -> bool

Available on crate feature unstable only.

Check if the pin is listening for interrupts.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn clear_interrupt(&mut self)

Available on crate feature unstable only.

Clear the interrupt status bit for this Pin

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_interrupt_set(&self) -> bool

Available on crate feature unstable only.

Checks if the interrupt status bit for this Pin is set

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn wakeup_enable( &mut self, enable: bool, event: WakeEvent, ) -> Result<(), WakeConfigError>

Available on crate feature unstable only.

Enable as a wake-up source.

This will unlisten for interrupts

Error

Configuring pin to wake up from light sleep on an edge trigger is currently not supported, corresponding variant of WakeConfigError will be returned.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn apply_output_config(&mut self, config: &OutputConfig)

Available on crate feature unstable only.

Applies the given output configuration to the pin.

This function does not set the pin to output (i.e. it does not enable the output driver). Note that the pull direction is common between the input and output configuration.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn set_output_enable(&mut self, enable_output: bool)

Available on crate feature unstable only.

Enable or disable the GPIO pin output driver.

The output level will be set to the last value. Use Self::set_high, Self::set_low or Self::set_level to set the output level before enabling the output.

This function does not disable the input buffer.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn set_high(&mut self)

Available on crate feature unstable only.

Set the output as high.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn set_low(&mut self)

Available on crate feature unstable only.

Set the output as low.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn set_level(&mut self, level: Level)

Available on crate feature unstable only.

Set the output level.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_set_high(&self) -> bool

Available on crate feature unstable only.

Is the output pin set as high?

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn is_set_low(&self) -> bool

Available on crate feature unstable only.

Is the output pin set as low?

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn output_level(&self) -> Level

Available on crate feature unstable only.

What level output is set to

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn toggle(&mut self)

Available on crate feature unstable only.

Toggle pin output

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn peripheral_input(&self) -> InputSignal<'d>

Available on crate feature unstable only.

Returns a peripheral input connected to this pin.

The input signal can be passed to peripherals in place of an input pin.

Note that the signal returned by this function is frozen.

let pin1_gpio = Flex::new(peripherals.GPIO1);
// Can be passed as an input.
let pin1 = pin1_gpio.peripheral_input();
// You can keep using the Flex, as well as connect the pin to a
// peripheral input.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn split(self) -> (InputSignal<'d>, OutputSignal<'d>)

Available on crate feature unstable only.

Split the pin into an input and output signal pair.

Peripheral signals allow connecting peripherals together without using external hardware.

Note that the signals returned by this function is frozen.

let pin1 = Flex::new(peripherals.GPIO1);
let (input, output) = pin1.split();

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub unsafe fn split_into_drivers(self) -> (Input<'d>, Output<'d>)

Available on crate feature unstable only.

Split the pin into an Input and an Output driver pair.

Note that the signal returned by this function is frozen. On the other hand, the pin driver is free to change settings.

This function allows you to configure an input-output pin, then keep working with the output half. This is mainly intended for testing, allowing you to drive a peripheral from a signal generated by software.

Safety

The caller must ensure that the pins are not being configured via their apply_config functions in the same time in multiple places. The pin drivers must not be turned back into Flex, unless one of the drivers is dropped first.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

pub fn into_peripheral_output(self) -> OutputSignal<'d>

Available on crate feature unstable only.

Turns the pin object into a peripheral output.

The output signal can be passed to peripherals in place of an output pin.

Note that the signal returned by this function is frozen.

let pin1_gpio = Flex::new(peripherals.GPIO1);
// Can be passed as an output.
let pin1 = pin1_gpio.into_peripheral_output();

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

Trait Implementations

impl<'d> Debug for Flex<'d>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ErrorType for Flex<'_>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

type Error = Infallible

Error type

impl<'d> From<Flex<'d>> for InputSignal<'d>

Available on crate feature unstable only.

fn from(pin: Flex<'d>) -> Self

Converts to this type from the input type.

impl<'d> From<Flex<'d>> for OutputSignal<'d>

Available on crate feature unstable only.

fn from(pin: Flex<'d>) -> Self

Converts to this type from the input type.

impl InputPin for Flex<'_>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

fn is_high(&mut self) -> Result<bool, Self::Error>

Is the input pin high?

fn is_low(&mut self) -> Result<bool, Self::Error>

Is the input pin low?

impl OutputPin for Flex<'_>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

fn set_low(&mut self) -> Result<(), Self::Error>

Drives the pin low.

fn set_high(&mut self) -> Result<(), Self::Error>

Drives the pin high.

fn set_state(&mut self, state: PinState) -> Result<(), Self::Error>

Drives the pin high or low depending on the provided value.

impl StatefulOutputPin for Flex<'_>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

fn is_set_high(&mut self) -> Result<bool, Self::Error>

Is the pin in drive high mode?

fn is_set_low(&mut self) -> Result<bool, Self::Error>

Is the pin in drive low mode?

fn toggle(&mut self) -> Result<(), Self::Error>

Toggle pin output.

impl Wait for Flex<'_>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

async fn wait_for_high(&mut self) -> Result<(), Self::Error>

Wait until the pin is high. If it is already high, return immediately.

async fn wait_for_low(&mut self) -> Result<(), Self::Error>

Wait until the pin is low. If it is already low, return immediately.

async fn wait_for_rising_edge(&mut self) -> Result<(), Self::Error>

Wait for the pin to undergo a transition from low to high.

async fn wait_for_falling_edge(&mut self) -> Result<(), Self::Error>

Wait for the pin to undergo a transition from high to low.

async fn wait_for_any_edge(&mut self) -> Result<(), Self::Error>

Wait for the pin to undergo any transition, i.e low to high OR high to low.

impl<'d> PeripheralInput<'d> for Flex<'d>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

impl<'d> PeripheralOutput<'d> for Flex<'d>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

impl<'d> PeripheralSignal<'d> for Flex<'d>

Available on crate feature unstable only.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.