Enum UartInterrupt 

#[non_exhaustive]
pub enum UartInterrupt {
    AtCmd,
    TxDone,
    RxFifoFull,
    RxTimeout,
}

Available on crate feature unstable only.

List of exposed UART events.

Stability

This API is marked as unstable and is only available when the unstable crate feature is enabled. This comes with no stability guarantees, and could be changed or removed at any time.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

AtCmd

Indicates that the received has detected the configured Uart::set_at_cmd byte.

TxDone

The transmitter has finished sending out all data from the FIFO.

RxFifoFull

The receiver has received more data than what RxConfig::fifo_full_threshold specifies.

RxTimeout

The receiver has not received any data for the time RxConfig::with_timeout specifies.

Trait Implementations

impl<O: Into<EnumSet<UartInterrupt>>> BitAnd<O> for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

type Output = EnumSet<UartInterrupt>

The resulting type after applying the & operator.

fn bitand(self, other: O) -> Self::Output

Performs the & operation.

impl<O: Into<EnumSet<UartInterrupt>>> BitOr<O> for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

type Output = EnumSet<UartInterrupt>

The resulting type after applying the | operator.

fn bitor(self, other: O) -> Self::Output

Performs the | operation.

impl<O: Into<EnumSet<UartInterrupt>>> BitXor<O> for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

type Output = EnumSet<UartInterrupt>

The resulting type after applying the ^ operator.

fn bitxor(self, other: O) -> Self::Output

Performs the ^ operation.

impl Clone for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl EnumSetConstHelper for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

const CONST_INIT_HELPER: __EnumSetInitHelper = __EnumSetInitHelper

The instance of the ConstInitHelper.

const CONST_OP_HELPER: __EnumSetOpHelper = __EnumSetOpHelper

The instance of the ConstOpHelper.

type ConstInitHelper = __EnumSetInitHelper

A helper type used to convert values to EnumSets at compile-time.

type ConstOpHelper = __EnumSetOpHelper

A helper type used to implement compile-time operations on enums.

impl EnumSetTypePrivate for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

const ALL_BITS: Self::Repr = {transmute(0x0f): <uart::UartInterrupt as enumset::__internal::EnumSetTypePrivate>::Repr}

A mask of bits that are valid in the bitset.

const BIT_WIDTH: u32 = 4u32

The largest bit used in the bitset.

const VARIANT_COUNT: u32 = 4u32

The number of variants in the bitset.

type Repr = u8

The underlying type used to store the bitset.

fn enum_into_u32(self) -> u32

Converts an enum of this type into its bit position.

unsafe fn enum_from_u32(val: u32) -> Self

Converts a bit position into an enum value.

unsafe fn enum_from_u32_checked(val: u32) -> Self

Converts a bit position into an enum value, with an debug_assert.

impl Not for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

type Output = EnumSet<UartInterrupt>

The resulting type after applying the ! operator.

fn not(self) -> Self::Output

Performs the unary ! operation.

impl PartialEq<EnumSet<UartInterrupt>> for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

fn eq(&self, other: &EnumSet<UartInterrupt>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<O: Into<EnumSet<UartInterrupt>>> Sub<O> for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

type Output = EnumSet<UartInterrupt>

The resulting type after applying the - operator.

fn sub(self, other: O) -> Self::Output

Performs the - operation.

impl Copy for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

impl EnumSetType for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.

impl Eq for UartInterrupt

Available on soc_has_uart0 or soc_has_uart1 or soc_has_uart2 only.