Skip to main content

RmiiPinBundle

esp_hal::ethernet

Struct RmiiPinBundle 

Source 
pub struct RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> {
    pub clock: C,
    pub rxd0: Rxd0,
    pub rxd1: Rxd1,
    pub rx_dv: RxDv,
    pub txd0: Txd0,
    pub txd1: Txd1,
    pub tx_en: TxEn,
    pub mdc: Mdc,
    pub mdio: Mdio,
}
Expand description

Wired RMII pads and RMII clock (pass to Ethernet::new).

Fields§

§clock: C§rxd0: Rxd0§rxd1: Rxd1§rx_dv: RxDv§txd0: Txd0§txd1: Txd1§tx_en: TxEn§mdc: Mdc§mdio: Mdio

Trait Implementations§

Source§

impl<'d, C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> EthernetPinBundle for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: RmiiClockConfig, Rxd0: RmiiRxd0 + 'd, Rxd1: RmiiRxd1 + 'd, RxDv: RmiiCrsDv + 'd, Txd0: RmiiTxd0 + 'd, Txd1: RmiiTxd1 + 'd, TxEn: RmiiTxEn + 'd, Mdc: PeripheralOutput<'d>, Mdio: PeripheralInput<'d> + PeripheralOutput<'d>,

Available on crate feature unstable only.
Source§

fn apply(self)

Applies the required configuration. Intended to be called by the Ethernet driver internally.

Auto Trait Implementations§

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> Freeze for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: Freeze, Rxd0: Freeze, Rxd1: Freeze, RxDv: Freeze, Txd0: Freeze, Txd1: Freeze, TxEn: Freeze, Mdc: Freeze, Mdio: Freeze,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> RefUnwindSafe for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: RefUnwindSafe, Rxd0: RefUnwindSafe, Rxd1: RefUnwindSafe, RxDv: RefUnwindSafe, Txd0: RefUnwindSafe, Txd1: RefUnwindSafe, TxEn: RefUnwindSafe, Mdc: RefUnwindSafe, Mdio: RefUnwindSafe,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> Send for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: Send, Rxd0: Send, Rxd1: Send, RxDv: Send, Txd0: Send, Txd1: Send, TxEn: Send, Mdc: Send, Mdio: Send,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> Sync for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: Sync, Rxd0: Sync, Rxd1: Sync, RxDv: Sync, Txd0: Sync, Txd1: Sync, TxEn: Sync, Mdc: Sync, Mdio: Sync,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> Unpin for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: Unpin, Rxd0: Unpin, Rxd1: Unpin, RxDv: Unpin, Txd0: Unpin, Txd1: Unpin, TxEn: Unpin, Mdc: Unpin, Mdio: Unpin,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> UnsafeUnpin for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: UnsafeUnpin, Rxd0: UnsafeUnpin, Rxd1: UnsafeUnpin, RxDv: UnsafeUnpin, Txd0: UnsafeUnpin, Txd1: UnsafeUnpin, TxEn: UnsafeUnpin, Mdc: UnsafeUnpin, Mdio: UnsafeUnpin,

§

impl<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio> UnwindSafe for RmiiPinBundle<C, Rxd0, Rxd1, RxDv, Txd0, Txd1, TxEn, Mdc, Mdio>
where C: UnwindSafe, Rxd0: UnwindSafe, Rxd1: UnwindSafe, RxDv: UnwindSafe, Txd0: UnwindSafe, Txd1: UnwindSafe, TxEn: UnwindSafe, Mdc: UnwindSafe, Mdio: UnwindSafe,

Blanket Implementations§

§

impl<T> Any for T
where T: 'static + ?Sized,

§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Borrow<T> for T
where T: ?Sized,

§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
§

impl<T> BorrowMut<T> for T
where T: ?Sized,

§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> From<T> for T

§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T, U> Into<U> for T
where U: From<T>,

§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of [From]<T> for U chooses to do.

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.