Index of Abbreviations

A2DP

Advanced Audio Distribution Profile

高级音频分发框架

ADC

Analog-to-Digital Converter

模拟数字转换器

ALPN

Application Layer Protocol Negotiation

应用层协议协商

AT

AT stands for “attention”.

AT 是 attention 的缩写。

AT port

AT port is the general name of AT log port (that is used to output log) and AT command port (that is used to send AT commands and receive responses). Please refer to Hardware Connection for default AT port pins and How to Set AT Port Pins for how to customize them.

AT 端口是 AT 日志端口(用于输出日志)和 AT 命令端口(用于发送 AT 命令和接收响应)的总称。请参考 Hardware Connection 了解默认的 AT 端口管脚,参考 How to Set AT Port Pins 了解如何自定义 AT 端口管脚。

Bluetooth LE

Bluetooth Low Energy

低功耗蓝牙

BluFi

Wi-Fi network configuration function via Bluetooth channel

BluFi 是一款基于蓝牙通道的 Wi-Fi 网络配置功能

DHCP

Dynamic Host Configuration Protocol

动态主机配置协议

DNS

Domain Name System

域名系统

DTIM

Delivery Traffic Indication Map

延迟传输指示映射

GATTC

Generic Attributes client

GATT 客户端

GATTS

Generic Attributes server

GATT 服务器

HID

Human Interface Device

人机接口设备

I2C

Inter-Integrated Circuit

集成电路总线

ICMP

Intemet Control Message Protocol

因特网控制报文协议

LWT

Last Will and Testament

遗嘱

MAC

Media Access Control

MAC 地址

mDNS

Multicast Domain Name System

多播 DNS

MSB

Most Significant Bit

最高有效位

MTU

maximum transmission unit

最大传输单元

NVS

Non-Volatile Storage

非易失性存储器

Normal Transmission Mode

Default Transmission Mode

In normal transmission mode, users can send AT commands. For examples, users can send MCU data received by AT command port to the opposite end of transmission by AT+CIPSEND; and the data received from the opposite end of transmission will also be returned to MCU through AT command port with additional prompt: +IPD.

During a normal transmission, if the connection breaks, ESP devices will give a prompt and will not attempt to reconnect.

More details are in Transmission Mode Shift Diagram.

普通传输模式

默认传输模式

在普通传输模式下,用户可以发送 AT 命令。 例如,用户可以通过 AT+CIPSEND 命令,发送 AT 命令口收到的 MCU 数据到传输对端。从传输对端收到的数据,会通过 AT 命令口返回给 MCU,同时会附带 +IPD 信息。

普通传输模式时,如果连接断开,ESP 不会重连,并提示连接断开。

更多介绍请参考 Transmission Mode Shift Diagram

Passthrough Mode

Also called as “Passthrough Sending & Receiving Mode”.

In passthrough mode, users cannot send AT commands except special +++ command. All MCU data received by AT command port will be sent to the opposite end of transmission without any modification; and the data received from the opposite end of transmission will also be returned to MCU through AT command port without any modification.

During the Wi-Fi passthrough transmission, if the connection breaks, ESP devices will keep trying to reconnect until +++ is input to exit the passthrough transmission.

More details are in Transmission Mode Shift Diagram.

透传模式

也称为 “透传发送接收模式”。

在透传模式下,用户不能发送其它 AT 命令,除了特别的 +++ 命令。AT 命令口收到的所有的 MCU 数据都将无修改地,发送到传输对端。从传输对端收到的数据也会通过 AT 命令口无修改地,返回给 MCU。

Wi-Fi 透传模式传输时,如果连接断开,ESP 会不停地尝试重连,此时单独输入 +++ 退出透传,则停止重连。

更多介绍请参考 Transmission Mode Shift Diagram

Transmission Mode Shift Diagram
Transmission Mode Shift Diagram

Transmission Mode Shift Diagram

More details are in the following introduction.

Passthrough Receiving Mode

The temporary mode between Normal Transmission Mode and Passthrough Mode.

In passthrough receiving mode, AT cannot send any data to the opposite end of transmission; but the data received from the opposite end of transmission can be returned to MCU through AT command port without any modification. More details are in Transmission Mode Shift Diagram.

透传接收模式

普通传输模式透传模式 之间的一个临时模式。

在透传接收模式,AT 不能发送数据到传输对端;但 AT 可以收到来自传输对端的数据,通过 AT 命令口无修改地返回给 MCU。更多介绍请参考 Transmission Mode Shift Diagram

PBC

Push Button Configuration

按钮配置

PCI Authentication

Payment Card Industry Authentication. In ESP-AT project, it refers to all Wi-Fi authentication modes except OPEN and WEP.

PCI 认证,在 ESP-AT 工程中指的是除 OPEN 和 WEP 以外的 Wi-Fi 认证模式。

PKI

A public key infrastructure (PKI) is a set of roles, policies, hardware, software and procedures needed to create, manage, distribute, use, store and revoke digital certificates and manage public-key encryption.

More details are in Public Key Infrastructure.

公开密钥基础建设。公开密钥基础建设(PKI)是一组由硬件、软件、参与者、管理政策与流程组成的基础架构,其目的在于创造、管理、分配、使用、存储以及撤销数字证书。

更多介绍请参考 公开密钥基础建设

PLCP

Physical Layer Convergence Procedure

PLCP 协议,即物理层会聚协议

PMF

protected management frame

受保护的管理帧

PSK

Pre-shared Key

预共享密钥

PWM

Pulse-Width Modulation

脉冲宽度调制

QoS

Quality of Service

服务质量

RTC

Real Time Controller. A group of circuits in SoC that keeps working in any chip mode and at any time.

实时控制器,为 SoC 中的一组电路,在任何芯片模式下都能随时保持工作。

SMP

Security Manager Protocol

安全管理协议

SNI

Server Name Indication

服务器名称指示

SNTP

Simple Network Time Protocol

简单网络时间协议

SPI

Serial Peripheral Interface

串行外设接口

SPP

Serial Port Profile

SPP 协议,即串口协议

SSL

Secure Sockets Layer

SSL 协议,即安全套接字协议

TLS

Transport Layer Security

TLS 协议,即传输层安全性协议

URC

Unsolicited Result Code

非请求结果码,一般为模组给 MCU 的串口返回

UTC

Coordinated Universal Time

协调世界时

UUID

universally unique identifier

通用唯一识别码

WEP

Wired-Equivalent Privacy

WEP 加密方式,即有线等效加密

WPA

Wi-Fi Protected Access

Wi-Fi 保护访问

WPA2

Wi-Fi Protected Access II

Wi-Fi 保护访问 II

WPS

Wi-Fi Protected Setup

Wi-Fi 保护设置