Wi-Fi 库

[English]

概述

Wi-Fi 库支持配置及监控 ESP32-C6 Wi-Fi 连网功能。支持配置：

station 模式（即 STA 模式或 Wi-Fi 客户端模式），此时 ESP32-C6 连接到接入点 (AP)。
AP 模式（即 Soft-AP 模式或接入点模式），此时基站连接到 ESP32-C6。
station/AP 共存模式（ESP32-C6 既是接入点，同时又作为基站连接到另外一个接入点）。
上述模式的各种安全模式（WPA、WPA2、WPA3 等）。
扫描接入点（包括主动扫描及被动扫描）。
使用混杂模式监控 IEEE802.11 Wi-Fi 数据包。

应用示例

ESP-IDF 仓库的 wifi 目录下提供了演示 Wi-Fi 库功能的几个应用示例，请查看 README 了解更多详细信息。

API 参考

Header File

components/esp_wifi/include/esp_wifi.h
This header file can be included with:
#include "esp_wifi.h"
This header file is a part of the API provided by the esp_wifi component. To declare that your component depends on esp_wifi, add the following to your CMakeLists.txt:
REQUIRES esp_wifi
or
PRIV_REQUIRES esp_wifi

Functions

esp_err_t esp_wifi_init(const wifi_init_config_t *config)

Initialize WiFi Allocate resource for WiFi driver, such as WiFi control structure, RX/TX buffer, WiFi NVS structure etc. This WiFi also starts WiFi task.

Attention: 1. This API must be called before all other WiFi API can be called
Attention: 2. Always use WIFI_INIT_CONFIG_DEFAULT macro to initialize the configuration to default values, this can guarantee all the fields get correct value when more fields are added into wifi_init_config_t in future release. If you want to set your own initial values, overwrite the default values which are set by WIFI_INIT_CONFIG_DEFAULT. Please be notified that the field 'magic' of wifi_init_config_t should always be WIFI_INIT_CONFIG_MAGIC!

参数

config -- pointer to WiFi initialized configuration structure; can point to a temporary variable.

返回

ESP_OK: succeed
ESP_ERR_NO_MEM: out of memory
others: refer to error code esp_err.h

esp_err_t esp_wifi_deinit(void)

Deinit WiFi Free all resource allocated in esp_wifi_init and stop WiFi task.

Attention: 1. This API should be called if you want to remove WiFi driver from the system

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_set_mode(wifi_mode_t mode)

Set the WiFi operating mode.

       Set the WiFi operating mode as station, soft-AP, station+soft-AP or NAN.
       The default mode is station mode.

参数

mode -- WiFi operating mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
others: refer to error code in esp_err.h

esp_err_t esp_wifi_get_mode(wifi_mode_t *mode)

Get current operating mode of WiFi.

参数

mode -- [out] store current WiFi mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_start(void)

Start WiFi according to current configuration If mode is WIFI_MODE_STA, it creates station control block and starts station If mode is WIFI_MODE_AP, it creates soft-AP control block and starts soft-AP If mode is WIFI_MODE_APSTA, it creates soft-AP and station control block and starts soft-AP and station If mode is WIFI_MODE_NAN, it creates NAN control block and starts NAN.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the wifi related config is correct
ESP_ERR_NO_MEM: out of memory
ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
ESP_FAIL: other WiFi internal errors

esp_err_t esp_wifi_stop(void)

Stop WiFi If mode is WIFI_MODE_STA, it stops station and frees station control block If mode is WIFI_MODE_AP, it stops soft-AP and frees soft-AP control block If mode is WIFI_MODE_APSTA, it stops station/soft-AP and frees station/soft-AP control block If mode is WIFI_MODE_NAN, it stops NAN and frees NAN control block.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_restore(void)

Restore WiFi stack persistent settings to default values.

This function will reset settings made using the following APIs:

esp_wifi_set_bandwidth,
esp_wifi_set_protocol,
esp_wifi_set_config related
esp_wifi_set_mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_connect(void)

Connect WiFi station to the AP.

Attention: 1. This API only impact WIFI_MODE_STA or WIFI_MODE_APSTA mode
Attention: 2. If station interface is connected to an AP, call esp_wifi_disconnect to disconnect.
Attention: 3. The scanning triggered by esp_wifi_scan_start() will not be effective until connection between device and the AP is established. If device is scanning and connecting at the same time, it will abort scanning and return a warning message and error number ESP_ERR_WIFI_STATE.
Attention: 4. This API attempts to connect to an Access Point (AP) only once. To enable reconnection in case of a connection failure, please use the 'failure_retry_cnt' feature in the 'wifi_sta_config_t'. Users are suggested to implement reconnection logic in their application for scenarios where the specified AP does not exist, or reconnection is desired after the device has received a disconnect event.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_WIFI_MODE: WiFi mode error
ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
ESP_ERR_WIFI_SSID: SSID of AP which station connects is invalid

esp_err_t esp_wifi_disconnect(void)

Disconnect WiFi station from the AP.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi was not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
ESP_FAIL: other WiFi internal errors

esp_err_t esp_wifi_clear_fast_connect(void)

Currently this API is just an stub API.

返回

ESP_OK: succeed
others: fail

esp_err_t esp_wifi_deauth_sta(uint16_t aid)

deauthenticate all stations or associated id equals to aid

参数

aid -- when aid is 0, deauthenticate all stations, otherwise deauthenticate station whose associated id is aid

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_MODE: WiFi mode is wrong

esp_err_t esp_wifi_scan_start(const wifi_scan_config_t *config, bool block)

Scan all available APs.

Attention: If this API is called, the found APs are stored in WiFi driver dynamic allocated memory. And then can be freed in esp_wifi_scan_get_ap_records(), esp_wifi_scan_get_ap_record() or esp_wifi_clear_ap_list(), so call any one to free the memory once the scan is done.
Attention: The values of maximum active scan time and passive scan time per channel are limited to 1500 milliseconds. Values above 1500ms may cause station to disconnect from AP and are not recommended.

参数

config -- configuration settings for scanning, if set to NULL default settings will be used of which default values are show_hidden:false, scan_type:active, scan_time.active.min:0, scan_time.active.max:120 miliseconds, scan_time.passive:360 miliseconds
block -- if block is true, this API will block the caller until the scan is done, otherwise it will return immediately

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
ESP_ERR_WIFI_TIMEOUT: blocking scan is timeout
ESP_ERR_WIFI_STATE: wifi still connecting when invoke esp_wifi_scan_start
others: refer to error code in esp_err.h

esp_err_t esp_wifi_scan_stop(void)

Stop the scan in process.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start

esp_err_t esp_wifi_scan_get_ap_num(uint16_t *number)

Get number of APs found in last scan.

Attention: This API can only be called when the scan is completed, otherwise it may get wrong value.

参数

number -- [out] store number of APs found in last scan

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_scan_get_ap_records(uint16_t *number, wifi_ap_record_t *ap_records)

Get AP list found in last scan.

Attention: This API will free all memory occupied by scanned AP list.

参数

number -- [inout] As input param, it stores max AP number ap_records can hold. As output param, it receives the actual AP number this API returns.
ap_records -- wifi_ap_record_t array to hold the found APs

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_NO_MEM: out of memory

esp_err_t esp_wifi_scan_get_ap_record(wifi_ap_record_t *ap_record)

Get one AP record from the scanned AP list.

Attention: Different from esp_wifi_scan_get_ap_records(), this API only gets one AP record from the scanned AP list each time. This API will free the memory of one AP record, if the user doesn't get all records in the scannned AP list, then needs to call esp_wifi_clear_ap_list() to free the remaining memory.

参数

ap_record -- [out] pointer to one AP record

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument
ESP_FAIL: scan APs is NULL, means all AP records fetched or no AP found

esp_err_t esp_wifi_clear_ap_list(void)

Clear AP list found in last scan.

Attention: This API will free all memory occupied by scanned AP list. When the obtained AP list fails, AP records must be cleared,otherwise it may cause memory leakage.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_WIFI_MODE: WiFi mode is wrong
ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the wifi related config is correct

esp_err_t esp_wifi_sta_get_ap_info(wifi_ap_record_t *ap_info)

Get information of AP to which the device is associated with.

Attention: When the obtained country information is empty, it means that the AP does not carry country information

参数

ap_info -- the wifi_ap_record_t to hold AP information sta can get the connected ap's phy mode info through the struct member phy_11b，phy_11g，phy_11n，phy_lr in the wifi_ap_record_t struct. For example, phy_11b = 1 imply that ap support 802.11b mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_CONN: The station interface don't initialized
ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status

esp_err_t esp_wifi_set_ps(wifi_ps_type_t type)

Set current WiFi power save type.

Attention: Default power save type is WIFI_PS_MIN_MODEM.

参数: type -- power save type
返回: ESP_OK: succeed

esp_err_t esp_wifi_get_ps(wifi_ps_type_t *type)

Get current WiFi power save type.

Attention: Default power save type is WIFI_PS_MIN_MODEM.

参数: type -- [out] store current power save type
返回: ESP_OK: succeed

esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap)

Set protocol type of specified interface The default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N). if CONFIG_SOC_WIFI_HE_SUPPORT, the default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AX).

Attention: Support 802.11b or 802.11bg or 802.11bgn or 802.11bgnax or LR mode

参数

ifx -- interfaces
protocol_bitmap -- WiFi protocol bitmap

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_IF: invalid interface
others: refer to error codes in esp_err.h

esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap)

Get the current protocol bitmap of the specified interface.

参数

ifx -- interface
protocol_bitmap -- [out] store current WiFi protocol bitmap of interface ifx

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_INVALID_ARG: invalid argument
others: refer to error codes in esp_err.h

esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw)

Set the bandwidth of specified interface.

Attention: 1. API return false if try to configure an interface that is not enabled
Attention: 2. WIFI_BW_HT40 is supported only when the interface support 11N

参数

ifx -- interface to be configured
bw -- bandwidth

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_INVALID_ARG: invalid argument
others: refer to error codes in esp_err.h

esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw)

Get the bandwidth of specified interface.

Attention: 1. API return false if try to get a interface that is not enable

参数

ifx -- interface to be configured
bw -- [out] store bandwidth of interface ifx

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_channel(uint8_t primary, wifi_second_chan_t second)

Set primary/secondary channel of device.

Attention: 1. This API should be called after esp_wifi_start() and before esp_wifi_stop()
Attention: 2. When device is in STA mode, this API should not be called when STA is scanning or connecting to an external AP
Attention: 3. When device is in softAP mode, this API should not be called when softAP has connected to external STAs
Attention: 4. When device is in STA+softAP mode, this API should not be called when in the scenarios described above
Attention: 5. The channel info set by this API will not be stored in NVS. So If you want to remeber the channel used before wifi stop, you need to call this API again after wifi start, or you can call esp_wifi_set_config() to store the channel info in NVS.

参数

primary -- for HT20, primary is the channel number, for HT40, primary is the primary channel
second -- for HT20, second is ignored, for HT40, second is the second channel

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start

esp_err_t esp_wifi_get_channel(uint8_t *primary, wifi_second_chan_t *second)

Get the primary/secondary channel of device.

Attention: 1. API return false if try to get a interface that is not enable

参数

primary -- store current primary channel
second -- [out] store current second channel

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_country(const wifi_country_t *country)

configure country info

Attention: 1. It is discouraged to call this API since this doesn't validate the per-country rules, it's up to the user to fill in all fields according to local regulations. Please use esp_wifi_set_country_code instead.
Attention: 2. The default country is "01" (world safe mode) {.cc="01", .schan=1, .nchan=11, .policy=WIFI_COUNTRY_POLICY_AUTO}.
Attention: 3. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '.
Attention: 4. When the country policy is WIFI_COUNTRY_POLICY_AUTO, the country info of the AP to which the station is connected is used. E.g. if the configured country info is {.cc="US", .schan=1, .nchan=11} and the country info of the AP to which the station is connected is {.cc="JP", .schan=1, .nchan=14} then the country info that will be used is {.cc="JP", .schan=1, .nchan=14}. If the station disconnected from the AP the country info is set back to the country info of the station automatically, {.cc="US", .schan=1, .nchan=11} in the example.
Attention: 5. When the country policy is WIFI_COUNTRY_POLICY_MANUAL, then the configured country info is used always.
Attention: 6. When the country info is changed because of configuration or because the station connects to a different external AP, the country IE in probe response/beacon of the soft-AP is also changed.
Attention: 7. The country configuration is stored into flash.
Attention: 8. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the country info.

参数

country -- the configured country info

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_get_country(wifi_country_t *country)

get the current country info

参数

country -- country info

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_mac(wifi_interface_t ifx, const uint8_t mac[6])

Set MAC address of WiFi station, soft-AP or NAN interface.

Attention: 1. This API can only be called when the interface is disabled
Attention: 2. Above mentioned interfaces have different MAC addresses, do not set them to be the same.
Attention: 3. The bit 0 of the first byte of MAC address can not be 1. For example, the MAC address can set to be "1a:XX:XX:XX:XX:XX", but can not be "15:XX:XX:XX:XX:XX".

参数

ifx -- interface
mac -- the MAC address

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_WIFI_MAC: invalid mac address
ESP_ERR_WIFI_MODE: WiFi mode is wrong
others: refer to error codes in esp_err.h

esp_err_t esp_wifi_get_mac(wifi_interface_t ifx, uint8_t mac[6])

Get mac of specified interface.

参数

ifx -- interface
mac -- [out] store mac of the interface ifx

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_IF: invalid interface

esp_err_t esp_wifi_set_promiscuous_rx_cb(wifi_promiscuous_cb_t cb)

Register the RX callback function in the promiscuous mode.

Each time a packet is received, the registered callback function will be called.

参数

cb -- callback

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_set_promiscuous(bool en)

Enable the promiscuous mode.

参数

en -- false - disable, true - enable

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_get_promiscuous(bool *en)

Get the promiscuous mode.

参数

en -- [out] store the current status of promiscuous mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_promiscuous_filter(const wifi_promiscuous_filter_t *filter)

Enable the promiscuous mode packet type filter.

备注

The default filter is to filter all packets except WIFI_PKT_MISC

参数

filter -- the packet type filtered in promiscuous mode.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_get_promiscuous_filter(wifi_promiscuous_filter_t *filter)

Get the promiscuous filter.

参数

filter -- [out] store the current status of promiscuous filter

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_promiscuous_ctrl_filter(const wifi_promiscuous_filter_t *filter)

Enable subtype filter of the control packet in promiscuous mode.

备注

The default filter is to filter none control packet.

参数

filter -- the subtype of the control packet filtered in promiscuous mode.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_get_promiscuous_ctrl_filter(wifi_promiscuous_filter_t *filter)

Get the subtype filter of the control packet in promiscuous mode.

参数

filter -- [out] store the current status of subtype filter of the control packet in promiscuous mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_config(wifi_interface_t interface, wifi_config_t *conf)

Set the configuration of the STA, AP or NAN.

Attention: 1. This API can be called only when specified interface is enabled, otherwise, API fail
Attention: 2. For station configuration, bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.
Attention: 3. ESP devices are limited to only one channel, so when in the soft-AP+station mode, the soft-AP will adjust its channel automatically to be the same as the channel of the station.
Attention: 4. The configuration will be stored in NVS for station and soft-AP

参数

interface -- interface
conf -- station, soft-AP or NAN configuration

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_IF: invalid interface
ESP_ERR_WIFI_MODE: invalid mode
ESP_ERR_WIFI_PASSWORD: invalid password
ESP_ERR_WIFI_NVS: WiFi internal NVS error
others: refer to the error code in esp_err.h

esp_err_t esp_wifi_get_config(wifi_interface_t interface, wifi_config_t *conf)

Get configuration of specified interface.

参数

interface -- interface
conf -- [out] station or soft-AP configuration

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_IF: invalid interface

esp_err_t esp_wifi_ap_get_sta_list(wifi_sta_list_t *sta)

Get STAs associated with soft-AP.

Attention: SSC only API

参数

sta -- [out] station list ap can get the connected sta's phy mode info through the struct member phy_11b，phy_11g，phy_11n，phy_lr in the wifi_sta_info_t struct. For example, phy_11b = 1 imply that sta support 802.11b mode

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_WIFI_MODE: WiFi mode is wrong
ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid

esp_err_t esp_wifi_ap_get_sta_aid(const uint8_t mac[6], uint16_t *aid)

Get AID of STA connected with soft-AP.

参数

mac -- STA's mac address
aid -- [out] Store the AID corresponding to STA mac

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument
ESP_ERR_NOT_FOUND: Requested resource not found
ESP_ERR_WIFI_MODE: WiFi mode is wrong
ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid

esp_err_t esp_wifi_set_storage(wifi_storage_t storage)

Set the WiFi API configuration storage type.

Attention: 1. The default value is WIFI_STORAGE_FLASH

参数

storage -- : storage type

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_vendor_ie(bool enable, wifi_vendor_ie_type_t type, wifi_vendor_ie_id_t idx, const void *vnd_ie)

Set 802.11 Vendor-Specific Information Element.

参数

enable -- If true, specified IE is enabled. If false, specified IE is removed.
type -- Information Element type. Determines the frame type to associate with the IE.
idx -- Index to set or clear. Each IE type can be associated with up to two elements (indices 0 & 1).
vnd_ie -- Pointer to vendor specific element data. First 6 bytes should be a header with fields matching vendor_ie_data_t. If enable is false, this argument is ignored and can be NULL. Data does not need to remain valid after the function returns.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init()
ESP_ERR_INVALID_ARG: Invalid argument, including if first byte of vnd_ie is not WIFI_VENDOR_IE_ELEMENT_ID (0xDD) or second byte is an invalid length.
ESP_ERR_NO_MEM: Out of memory

esp_err_t esp_wifi_set_vendor_ie_cb(esp_vendor_ie_cb_t cb, void *ctx)

Register Vendor-Specific Information Element monitoring callback.

参数

cb -- Callback function
ctx -- Context argument, passed to callback function.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_set_max_tx_power(int8_t power)

Set maximum transmitting power after WiFi start.

Attention: 1. Maximum power before wifi startup is limited by PHY init data bin.
Attention: 2. The value set by this API will be mapped to the max_tx_power of the structure wifi_country_t variable.
Attention: 3. Mapping Table {Power, max_tx_power} = {{8, 2}, {20, 5}, {28, 7}, {34, 8}, {44, 11}, {52, 13}, {56, 14}, {60, 15}, {66, 16}, {72, 18}, {80, 20}}.
Attention: 4. Param power unit is 0.25dBm, range is [8, 84] corresponding to 2dBm - 20dBm.
Attention: 5. Relationship between set value and actual value. As follows: {set value range, actual value} = {{[8, 19],8}, {[20, 27],20}, {[28, 33],28}, {[34, 43],34}, {[44, 51],44}, {[52, 55],52}, {[56, 59],56}, {[60, 65],60}, {[66, 71],66}, {[72, 79],72}, {[80, 84],80}}.

参数

power -- Maximum WiFi transmitting power.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is out of range

esp_err_t esp_wifi_get_max_tx_power(int8_t *power)

Get maximum transmiting power after WiFi start.

参数

power -- Maximum WiFi transmitting power, unit is 0.25dBm.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_set_event_mask(uint32_t mask)

Set mask to enable or disable some WiFi events.

Attention: 1. Mask can be created by logical OR of various WIFI_EVENT_MASK_ constants. Events which have corresponding bit set in the mask will not be delivered to the system event handler.
Attention: 2. Default WiFi event mask is WIFI_EVENT_MASK_AP_PROBEREQRECVED.
Attention: 3. There may be lots of stations sending probe request data around. Don't unmask this event unless you need to receive probe request data.

参数

mask -- WiFi event mask.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_get_event_mask(uint32_t *mask)

Get mask of WiFi events.

参数

mask -- WiFi event mask.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_80211_tx(wifi_interface_t ifx, const void *buffer, int len, bool en_sys_seq)

Send raw ieee80211 data.

Attention: Currently only support for sending beacon/probe request/probe response/action and non-QoS data frame

参数

ifx -- interface if the Wi-Fi mode is Station, the ifx should be WIFI_IF_STA. If the Wi-Fi mode is SoftAP, the ifx should be WIFI_IF_AP. If the Wi-Fi mode is Station+SoftAP, the ifx should be WIFI_IF_STA or WIFI_IF_AP. If the ifx is wrong, the API returns ESP_ERR_WIFI_IF.
buffer -- raw ieee80211 buffer
len -- the length of raw buffer, the len must be <= 1500 Bytes and >= 24 Bytes
en_sys_seq -- indicate whether use the internal sequence number. If en_sys_seq is false, the sequence in raw buffer is unchanged, otherwise it will be overwritten by WiFi driver with the system sequence number. Generally, if esp_wifi_80211_tx is called before the Wi-Fi connection has been set up, both en_sys_seq==true and en_sys_seq==false are fine. However, if the API is called after the Wi-Fi connection has been set up, en_sys_seq must be true, otherwise ESP_ERR_INVALID_ARG is returned.

返回

ESP_OK: success
ESP_ERR_WIFI_IF: Invalid interface
ESP_ERR_INVALID_ARG: Invalid parameter
ESP_ERR_WIFI_NO_MEM: out of memory

esp_err_t esp_wifi_set_csi_rx_cb(wifi_csi_cb_t cb, void *ctx)

Register the RX callback function of CSI data.

   Each time a CSI data is received, the callback function will be called.

参数

cb -- callback
ctx -- context argument, passed to callback function

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init

esp_err_t esp_wifi_set_csi_config(const wifi_csi_config_t *config)

Set CSI data configuration.

return

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled
ESP_ERR_INVALID_ARG: invalid argument

参数: config -- configuration

esp_err_t esp_wifi_set_csi(bool en)

Enable or disable CSI.

return

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled
ESP_ERR_INVALID_ARG: invalid argument

参数: en -- true - enable, false - disable

esp_err_t esp_wifi_set_ant_gpio(const wifi_ant_gpio_config_t *config)

Set antenna GPIO configuration.

参数

config -- Antenna GPIO configuration.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid GPIO number etc

esp_err_t esp_wifi_get_ant_gpio(wifi_ant_gpio_config_t *config)

Get current antenna GPIO configuration.

参数

config -- Antenna GPIO configuration.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL

esp_err_t esp_wifi_set_ant(const wifi_ant_config_t *config)

Set antenna configuration.

参数

config -- Antenna configuration.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid antenna mode or invalid GPIO number

esp_err_t esp_wifi_get_ant(wifi_ant_config_t *config)

Get current antenna configuration.

参数

config -- Antenna configuration.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL

int64_t esp_wifi_get_tsf_time(wifi_interface_t interface)

Get the TSF time In Station mode or SoftAP+Station mode if station is not connected or station doesn't receive at least one beacon after connected, will return 0.

Attention: Enabling power save may cause the return value inaccurate, except WiFi modem sleep

参数: interface -- The interface whose tsf_time is to be retrieved.
返回: 0 or the TSF time

esp_err_t esp_wifi_set_inactive_time(wifi_interface_t ifx, uint16_t sec)

Set the inactive time of the STA or AP.

Attention: 1. For Station, If the station does not receive a beacon frame from the connected SoftAP during the inactive time, disconnect from SoftAP. Default 6s.
Attention: 2. For SoftAP, If the softAP doesn't receive any data from the connected STA during inactive time, the softAP will force deauth the STA. Default is 300s.
Attention: 3. The inactive time configuration is not stored into flash

参数

ifx -- interface to be configured.
sec -- Inactive time. Unit seconds.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument, For Station, if sec is less than 3. For SoftAP, if sec is less than 10.

esp_err_t esp_wifi_get_inactive_time(wifi_interface_t ifx, uint16_t *sec)

Get inactive time of specified interface.

参数

ifx -- Interface to be configured.
sec -- Inactive time. Unit seconds.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_statis_dump(uint32_t modules)

Dump WiFi statistics.

参数

modules -- statistic modules to be dumped

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_set_rssi_threshold(int32_t rssi)

Set RSSI threshold, if average rssi gets lower than threshold, WiFi task will post event WIFI_EVENT_STA_BSS_RSSI_LOW.

Attention: If the user wants to receive another WIFI_EVENT_STA_BSS_RSSI_LOW event after receiving one, this API needs to be called again with an updated/same RSSI threshold.

参数

rssi -- threshold value in dbm between -100 to 10 Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_ftm_initiate_session(wifi_ftm_initiator_cfg_t *cfg)

Start an FTM Initiator session by sending FTM request If successful, event WIFI_EVENT_FTM_REPORT is generated with the result of the FTM procedure.

Attention: 1. Use this API only in Station mode.
Attention: 2. If FTM is initiated on a different channel than Station is connected in or internal SoftAP is started in, FTM defaults to a single burst in ASAP mode.

参数

cfg -- FTM Initiator session configuration

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_ftm_end_session(void)

End the ongoing FTM Initiator session.

Attention: This API works only on FTM Initiator

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_ftm_resp_set_offset(int16_t offset_cm)

Set offset in cm for FTM Responder. An equivalent offset is calculated in picoseconds and added in TOD of FTM Measurement frame (T1).

Attention: Use this API only in AP mode before performing FTM as responder

参数

offset_cm -- T1 Offset to be added in centimeters

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_ftm_get_report(wifi_ftm_report_entry_t *report, uint8_t num_entries)

Get FTM measurements report copied into a user provided buffer.

Attention: 1. To get the FTM report, user first needs to allocate a buffer of size (sizeof(wifi_ftm_report_entry_t) * num_entries) where the API will fill up to num_entries valid FTM measurements in the buffer. Total number of entries can be found in the event WIFI_EVENT_FTM_REPORT as ftm_report_num_entries
Attention: 2. The internal FTM report is freed upon use of this API which means the API can only be used once afer every FTM session initiated
Attention: 3. Passing the buffer as NULL merely frees the FTM report

参数

report -- Pointer to the buffer for receiving the FTM report
num_entries -- Number of FTM report entries to be filled in the report

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_config_11b_rate(wifi_interface_t ifx, bool disable)

Enable or disable 11b rate of specified interface.

Attention: 1. This API should be called after esp_wifi_init() and before esp_wifi_start().
Attention: 2. Only when really need to disable 11b rate call this API otherwise don't call this.

参数

ifx -- Interface to be configured.
disable -- true means disable 11b rate while false means enable 11b rate.

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_connectionless_module_set_wake_interval(uint16_t wake_interval)

Set wake interval for connectionless modules to wake up periodically.

Attention: 1. Only one wake interval for all connectionless modules.
Attention: 2. This configuration could work at connected status. When ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is enabled, this configuration could work at disconnected status.
Attention: 3. Event WIFI_EVENT_CONNECTIONLESS_MODULE_WAKE_INTERVAL_START would be posted each time wake interval starts.
Attention: 4. Recommend to configure interval in multiples of hundred. (e.g. 100ms)
Attention: 5. Recommend to configure interval to ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE to get stable performance at coexistence mode.

参数: wake_interval -- Milliseconds after would the chip wake up, from 1 to 65535.

esp_err_t esp_wifi_force_wakeup_acquire(void)

Request extra reference of Wi-Fi radio. Wi-Fi keep active state(RF opened) to be able to receive packets.

Attention: Please pair the use of esp_wifi_force_wakeup_acquire with esp_wifi_force_wakeup_release.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start

esp_err_t esp_wifi_force_wakeup_release(void)

Release extra reference of Wi-Fi radio. Wi-Fi go to sleep state(RF closed) if no more use of radio.

Attention: Please pair the use of esp_wifi_force_wakeup_acquire with esp_wifi_force_wakeup_release.

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start

esp_err_t esp_wifi_set_country_code(const char *country, bool ieee80211d_enabled)

configure country

Attention: 1. When ieee80211d_enabled, the country info of the AP to which the station is connected is used. E.g. if the configured country is US and the country info of the AP to which the station is connected is JP then the country info that will be used is JP. If the station disconnected from the AP the country info is set back to the country info of the station automatically, US in the example.
Attention: 2. When ieee80211d_enabled is disabled, then the configured country info is used always.
Attention: 3. When the country info is changed because of configuration or because the station connects to a different external AP, the country IE in probe response/beacon of the soft-AP is also changed.
Attention: 4. The country configuration is stored into flash.
Attention: 5. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the country info.
Attention: 6. Supported country codes are "01"(world safe mode) "AT","AU","BE","BG","BR", "CA","CH","CN","CY","CZ","DE","DK","EE","ES","FI","FR","GB","GR","HK","HR","HU", "IE","IN","IS","IT","JP","KR","LI","LT","LU","LV","MT","MX","NL","NO","NZ","PL","PT", "RO","SE","SI","SK","TW","US"
Attention: 7. When country code "01" (world safe mode) is set, SoftAP mode won't contain country IE.
Attention: 8. The default country is "01" (world safe mode) and ieee80211d_enabled is TRUE.
Attention: 9. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '.

参数

country -- the configured country ISO code
ieee80211d_enabled -- 802.11d is enabled or not

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_get_country_code(char *country)

get the current country code

参数

country -- country code

返回

ESP_OK: succeed
ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
ESP_ERR_INVALID_ARG: invalid argument

esp_err_t esp_wifi_config_80211_tx_rate(wifi_interface_t ifx, wifi_phy_rate_t rate)

Config 80211 tx rate of specified interface.

Attention: 1. This API should be called after esp_wifi_init() and before esp_wifi_start().

参数

ifx -- Interface to be configured.
rate -- Phy rate to be configured.

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_disable_pmf_config(wifi_interface_t ifx)

Disable PMF configuration for specified interface.

Attention: This API should be called after esp_wifi_set_config() and before esp_wifi_start().

参数

ifx -- Interface to be configured.

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_sta_get_aid(uint16_t *aid)

Get the Association id assigned to STA by AP.

Attention: aid = 0 if station is not connected to AP.

参数

aid -- [out] store the aid

返回

ESP_OK: succeed

esp_err_t esp_wifi_sta_get_negotiated_phymode(wifi_phy_mode_t *phymode)

Get the negotiated phymode after connection.

参数

phymode -- [out] store the negotiated phymode.

返回

ESP_OK: succeed

esp_err_t esp_wifi_set_dynamic_cs(bool enabled)

Config dynamic carrier sense.

Attention: This API should be called after esp_wifi_start().

参数

enabled -- Dynamic carrier sense is enabled or not.

返回

ESP_OK: succeed
others: failed

esp_err_t esp_wifi_sta_get_rssi(int *rssi)

Get the rssi information of AP to which the device is associated with.

Attention: 1. This API should be called after station connected to AP.
Attention: 2. Use this API only in WIFI_MODE_STA or WIFI_MODE_APSTA mode.

参数

rssi -- store the rssi info received from last beacon.

返回

ESP_OK: succeed
ESP_ERR_INVALID_ARG: invalid argument
ESP_FAIL: failed

Structures

struct wifi_init_config_t

WiFi stack configuration parameters passed to esp_wifi_init call.

Public Members

wifi_osi_funcs_t *osi_funcs: WiFi OS functions

wpa_crypto_funcs_t wpa_crypto_funcs: WiFi station crypto functions when connect

int static_rx_buf_num: WiFi static RX buffer number

int dynamic_rx_buf_num: WiFi dynamic RX buffer number

int tx_buf_type: WiFi TX buffer type

int static_tx_buf_num: WiFi static TX buffer number

int dynamic_tx_buf_num: WiFi dynamic TX buffer number

int rx_mgmt_buf_type: WiFi RX MGMT buffer type

int rx_mgmt_buf_num: WiFi RX MGMT buffer number

int cache_tx_buf_num: WiFi TX cache buffer number

int csi_enable: WiFi channel state information enable flag

int ampdu_rx_enable: WiFi AMPDU RX feature enable flag

int ampdu_tx_enable: WiFi AMPDU TX feature enable flag

int amsdu_tx_enable: WiFi AMSDU TX feature enable flag

int nvs_enable: WiFi NVS flash enable flag

int nano_enable: Nano option for printf/scan family enable flag

int rx_ba_win: WiFi Block Ack RX window size

int wifi_task_core_id: WiFi Task Core ID

int beacon_max_len: WiFi softAP maximum length of the beacon

int mgmt_sbuf_num: WiFi management short buffer number, the minimum value is 6, the maximum value is 32

uint64_t feature_caps: Enables additional WiFi features and capabilities

bool sta_disconnected_pm: WiFi Power Management for station at disconnected status

int espnow_max_encrypt_num: Maximum encrypt number of peers supported by espnow

int magic: WiFi init magic number, it should be the last field

Macros

ESP_ERR_WIFI_NOT_INIT: WiFi driver was not installed by esp_wifi_init

ESP_ERR_WIFI_NOT_STARTED: WiFi driver was not started by esp_wifi_start

ESP_ERR_WIFI_NOT_STOPPED: WiFi driver was not stopped by esp_wifi_stop

ESP_ERR_WIFI_IF: WiFi interface error

ESP_ERR_WIFI_MODE: WiFi mode error

ESP_ERR_WIFI_STATE: WiFi internal state error

ESP_ERR_WIFI_CONN: WiFi internal control block of station or soft-AP error

ESP_ERR_WIFI_NVS: WiFi internal NVS module error

ESP_ERR_WIFI_MAC: MAC address is invalid

ESP_ERR_WIFI_SSID: SSID is invalid

ESP_ERR_WIFI_PASSWORD: Password is invalid

ESP_ERR_WIFI_TIMEOUT: Timeout error

ESP_ERR_WIFI_WAKE_FAIL: WiFi is in sleep state(RF closed) and wakeup fail

ESP_ERR_WIFI_WOULD_BLOCK: The caller would block

ESP_ERR_WIFI_NOT_CONNECT: Station still in disconnect status

ESP_ERR_WIFI_POST: Failed to post the event to WiFi task

ESP_ERR_WIFI_INIT_STATE: Invalid WiFi state when init/deinit is called

ESP_ERR_WIFI_STOP_STATE: Returned when WiFi is stopping

ESP_ERR_WIFI_NOT_ASSOC: The WiFi connection is not associated

ESP_ERR_WIFI_TX_DISALLOW: The WiFi TX is disallowed

ESP_ERR_WIFI_TWT_FULL: no available flow id

ESP_ERR_WIFI_TWT_SETUP_TIMEOUT: Timeout of receiving twt setup response frame, timeout times can be set during twt setup

ESP_ERR_WIFI_TWT_SETUP_TXFAIL: TWT setup frame tx failed

ESP_ERR_WIFI_TWT_SETUP_REJECT: The twt setup request was rejected by the AP

ESP_ERR_WIFI_DISCARD: Discard frame

ESP_ERR_WIFI_ROC_IN_PROGRESS: ROC op is in progress

WIFI_STATIC_TX_BUFFER_NUM

WIFI_CACHE_TX_BUFFER_NUM

WIFI_DYNAMIC_TX_BUFFER_NUM

WIFI_RX_MGMT_BUF_NUM_DEF

WIFI_CSI_ENABLED

WIFI_AMPDU_RX_ENABLED

WIFI_AMPDU_TX_ENABLED

WIFI_AMSDU_TX_ENABLED

WIFI_NVS_ENABLED

WIFI_NANO_FORMAT_ENABLED

WIFI_INIT_CONFIG_MAGIC

WIFI_DEFAULT_RX_BA_WIN

WIFI_TASK_CORE_ID

WIFI_SOFTAP_BEACON_MAX_LEN

WIFI_MGMT_SBUF_NUM

WIFI_STA_DISCONNECTED_PM_ENABLED

WIFI_ENABLE_WPA3_SAE

WIFI_ENABLE_SPIRAM

WIFI_FTM_INITIATOR

WIFI_FTM_RESPONDER

WIFI_ENABLE_GCMP

WIFI_ENABLE_GMAC

WIFI_ENABLE_11R

WIFI_ENABLE_ENTERPRISE

CONFIG_FEATURE_WPA3_SAE_BIT

CONFIG_FEATURE_CACHE_TX_BUF_BIT

CONFIG_FEATURE_FTM_INITIATOR_BIT

CONFIG_FEATURE_FTM_RESPONDER_BIT

CONFIG_FEATURE_GCMP_BIT

CONFIG_FEATURE_GMAC_BIT

CONFIG_FEATURE_11R_BIT

CONFIG_FEATURE_WIFI_ENT_BIT

WIFI_FEATURE_CAPS

WIFI_INIT_CONFIG_DEFAULT()

ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE

Type Definitions

typedef void (*wifi_promiscuous_cb_t)(void *buf, wifi_promiscuous_pkt_type_t type)

The RX callback function in the promiscuous mode. Each time a packet is received, the callback function will be called.

Param buf: Data received. Type of data in buffer (wifi_promiscuous_pkt_t or wifi_pkt_rx_ctrl_t) indicated by 'type' parameter.
Param type: promiscuous packet type.

typedef void (*esp_vendor_ie_cb_t)(void *ctx, wifi_vendor_ie_type_t type, const uint8_t sa[6], const vendor_ie_data_t *vnd_ie, int rssi)

Function signature for received Vendor-Specific Information Element callback.

Param ctx: Context argument, as passed to esp_wifi_set_vendor_ie_cb() when registering callback.
Param type: Information element type, based on frame type received.
Param sa: Source 802.11 address.
Param vnd_ie: Pointer to the vendor specific element data received.
Param rssi: Received signal strength indication.

typedef void (*wifi_csi_cb_t)(void *ctx, wifi_csi_info_t *data)

The RX callback function of Channel State Information(CSI) data.

   Each time a CSI data is received, the callback function will be called.

Param ctx: context argument, passed to esp_wifi_set_csi_rx_cb() when registering callback function.
Param data: CSI data received. The memory that it points to will be deallocated after callback function returns.

Header File

components/esp_wifi/include/esp_wifi_types.h
This header file can be included with:
#include "esp_wifi_types.h"
This header file is a part of the API provided by the esp_wifi component. To declare that your component depends on esp_wifi, add the following to your CMakeLists.txt:
REQUIRES esp_wifi
or
PRIV_REQUIRES esp_wifi

Unions

union wifi_config_t

#include <esp_wifi_types.h>

Configuration data for device's AP or STA or NAN.

The usage of this union (for ap, sta or nan configuration) is determined by the accompanying interface argument passed to esp_wifi_set_config() or esp_wifi_get_config()

Public Members

wifi_ap_config_t ap: configuration of AP

wifi_sta_config_t sta: configuration of STA

wifi_nan_config_t nan: configuration of NAN

Structures

struct wifi_country_t

Structure describing WiFi country-based regional restrictions.

Public Members

char cc[3]: country code string

uint8_t schan: start channel

uint8_t nchan: total channel number

int8_t max_tx_power: This field is used for getting WiFi maximum transmitting power, call esp_wifi_set_max_tx_power to set the maximum transmitting power.

wifi_country_policy_t policy: country policy

struct wifi_active_scan_time_t

Range of active scan times per channel.

Public Members

uint32_t min: minimum active scan time per channel, units: millisecond

uint32_t max: maximum active scan time per channel, units: millisecond, values above 1500ms may cause station to disconnect from AP and are not recommended.

struct wifi_scan_time_t

Aggregate of active & passive scan time per channel.

Public Members

wifi_active_scan_time_t active: active scan time per channel, units: millisecond.

uint32_t passive: passive scan time per channel, units: millisecond, values above 1500ms may cause station to disconnect from AP and are not recommended.

struct wifi_scan_config_t

Parameters for an SSID scan.

Public Members

uint8_t *ssid: SSID of AP

uint8_t *bssid: MAC address of AP

uint8_t channel: channel, scan the specific channel

bool show_hidden: enable to scan AP whose SSID is hidden

wifi_scan_type_t scan_type: scan type, active or passive

wifi_scan_time_t scan_time: scan time per channel

uint8_t home_chan_dwell_time: time spent at home channel between scanning consecutive channels.

struct wifi_he_ap_info_t

Description of a WiFi AP HE Info.

Public Members

uint8_t bss_color: an unsigned integer whose value is the BSS Color of the BSS corresponding to the AP

uint8_t partial_bss_color: indicate if an AID assignment rule based on the BSS color

uint8_t bss_color_disabled: indicate if the use of BSS color is disabled

uint8_t bssid_index: in M-BSSID set, identifies the nontransmitted BSSID

struct wifi_ap_record_t

Description of a WiFi AP.

Public Members

uint8_t bssid[6]: MAC address of AP

uint8_t ssid[33]: SSID of AP

uint8_t primary: channel of AP

wifi_second_chan_t second: secondary channel of AP

int8_t rssi: signal strength of AP. Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive

wifi_auth_mode_t authmode: authmode of AP

wifi_cipher_type_t pairwise_cipher: pairwise cipher of AP

wifi_cipher_type_t group_cipher: group cipher of AP

wifi_ant_t ant: antenna used to receive beacon from AP

uint32_t phy_11b: bit: 0 flag to identify if 11b mode is enabled or not

uint32_t phy_11g: bit: 1 flag to identify if 11g mode is enabled or not

uint32_t phy_11n: bit: 2 flag to identify if 11n mode is enabled or not

uint32_t phy_lr: bit: 3 flag to identify if low rate is enabled or not

uint32_t phy_11ax: bit: 4 flag to identify if 11ax mode is enabled or not

uint32_t wps: bit: 5 flag to identify if WPS is supported or not

uint32_t ftm_responder: bit: 6 flag to identify if FTM is supported in responder mode

uint32_t ftm_initiator: bit: 7 flag to identify if FTM is supported in initiator mode

uint32_t reserved: bit: 8..31 reserved

wifi_country_t country: country information of AP

wifi_he_ap_info_t he_ap: HE AP info

struct wifi_scan_threshold_t

Structure describing parameters for a WiFi fast scan.

Public Members

int8_t rssi: The minimum rssi to accept in the fast scan mode

wifi_auth_mode_t authmode: The weakest authmode to accept in the fast scan mode Note: Incase this value is not set and password is set as per WPA2 standards(password len >= 8), it will be defaulted to WPA2 and device won't connect to deprecated WEP/WPA networks. Please set authmode threshold as WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK to connect to WEP/WPA networks

struct wifi_pmf_config_t

Configuration structure for Protected Management Frame

Public Members

bool capable: Deprecated variable. Device will always connect in PMF mode if other device also advertizes PMF capability.

bool required: Advertizes that Protected Management Frame is required. Device will not associate to non-PMF capable devices.

struct wifi_ap_config_t

Soft-AP configuration settings for the device.

Public Members

uint8_t ssid[32]: SSID of soft-AP. If ssid_len field is 0, this must be a Null terminated string. Otherwise, length is set according to ssid_len.

uint8_t password[64]: Password of soft-AP.

uint8_t ssid_len: Optional length of SSID field.

uint8_t channel: Channel of soft-AP

wifi_auth_mode_t authmode: Auth mode of soft-AP. Do not support AUTH_WEP, AUTH_WAPI_PSK and AUTH_OWE in soft-AP mode. When the auth mode is set to WPA2_PSK, WPA2_WPA3_PSK or WPA3_PSK, the pairwise cipher will be overwritten with WIFI_CIPHER_TYPE_CCMP.

uint8_t ssid_hidden: Broadcast SSID or not, default 0, broadcast the SSID

uint8_t max_connection: Max number of stations allowed to connect in

uint16_t beacon_interval: Beacon interval which should be multiples of 100. Unit: TU(time unit, 1 TU = 1024 us). Range: 100 ~ 60000. Default value: 100

uint8_t csa_count: Channel Switch Announcement Count. Notify the station that the channel will switch after the csa_count beacon intervals. Default value: 3

uint8_t dtim_period: Dtim period of soft-AP. Default value: 2

wifi_cipher_type_t pairwise_cipher: Pairwise cipher of SoftAP, group cipher will be derived using this. Cipher values are valid starting from WIFI_CIPHER_TYPE_TKIP, enum values before that will be considered as invalid and default cipher suites(TKIP+CCMP) will be used. Valid cipher suites in softAP mode are WIFI_CIPHER_TYPE_TKIP, WIFI_CIPHER_TYPE_CCMP and WIFI_CIPHER_TYPE_TKIP_CCMP.

bool ftm_responder: Enable FTM Responder mode

wifi_pmf_config_t pmf_cfg: Configuration for Protected Management Frame

wifi_sae_pwe_method_t sae_pwe_h2e: Configuration for SAE PWE derivation method

struct wifi_sta_config_t

STA configuration settings for the device.

Public Members

uint8_t ssid[32]: SSID of target AP.

uint8_t password[64]: Password of target AP.

wifi_scan_method_t scan_method: do all channel scan or fast scan

bool bssid_set: whether set MAC address of target AP or not. Generally, station_config.bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.

uint8_t bssid[6]: MAC address of target AP

uint8_t channel: channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.

uint16_t listen_interval: Listen interval for ESP32 station to receive beacon when WIFI_PS_MAX_MODEM is set. Units: AP beacon intervals. Defaults to 3 if set to 0.

wifi_sort_method_t sort_method: sort the connect AP in the list by rssi or security mode

wifi_scan_threshold_t threshold: When scan_threshold is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used.

wifi_pmf_config_t pmf_cfg: Configuration for Protected Management Frame. Will be advertised in RSN Capabilities in RSN IE.

uint32_t rm_enabled: Whether Radio Measurements are enabled for the connection

uint32_t btm_enabled: Whether BSS Transition Management is enabled for the connection

uint32_t mbo_enabled: Whether MBO is enabled for the connection

uint32_t ft_enabled: Whether FT is enabled for the connection

uint32_t owe_enabled: Whether OWE is enabled for the connection

uint32_t transition_disable: Whether to enable transition disable feature

uint32_t reserved: Reserved for future feature set

wifi_sae_pwe_method_t sae_pwe_h2e: Configuration for SAE PWE derivation method

wifi_sae_pk_mode_t sae_pk_mode: Configuration for SAE-PK (Public Key) Authentication method

uint8_t failure_retry_cnt: Number of connection retries station will do before moving to next AP. scan_method should be set as WIFI_ALL_CHANNEL_SCAN to use this config. Note: Enabling this may cause connection time to increase incase best AP doesn't behave properly.

uint32_t he_dcm_set: Whether DCM max.constellation for transmission and reception is set.

uint32_t he_dcm_max_constellation_tx: Indicate the max.constellation for DCM in TB PPDU the STA supported. 0: not supported. 1: BPSK, 2: QPSK, 3: 16-QAM. The default value is 3.

uint32_t he_dcm_max_constellation_rx: Indicate the max.constellation for DCM in both Data field and HE-SIG-B field the STA supported. 0: not supported. 1: BPSK, 2: QPSK, 3: 16-QAM. The default value is 3.

uint32_t he_mcs9_enabled: Whether to support HE-MCS 0 to 9. The default value is 0.

uint32_t he_su_beamformee_disabled: Whether to disable support for operation as an SU beamformee.

uint32_t he_trig_su_bmforming_feedback_disabled: Whether to disable support the transmission of SU feedback in an HE TB sounding sequence.

uint32_t he_trig_mu_bmforming_partial_feedback_disabled: Whether to disable support the transmission of partial-bandwidth MU feedback in an HE TB sounding sequence.

uint32_t he_trig_cqi_feedback_disabled: Whether to disable support the transmission of CQI feedback in an HE TB sounding sequence.

uint32_t he_reserved: Reserved for future feature set

uint8_t sae_h2e_identifier[SAE_H2E_IDENTIFIER_LEN]: Password identifier for H2E. this needs to be null terminated string

struct wifi_nan_config_t

NAN Discovery start configuration.

Public Members

uint8_t op_channel: NAN Discovery operating channel

uint8_t master_pref: Device's preference value to serve as NAN Master

uint8_t scan_time: Scan time in seconds while searching for a NAN cluster

uint16_t warm_up_sec: Warm up time before assuming NAN Anchor Master role

struct wifi_sta_info_t

Description of STA associated with AP.

Public Members

uint8_t mac[6]: mac address

int8_t rssi: current average rssi of sta connected

uint32_t phy_11b: bit: 0 flag to identify if 11b mode is enabled or not

uint32_t phy_11g: bit: 1 flag to identify if 11g mode is enabled or not

uint32_t phy_11n: bit: 2 flag to identify if 11n mode is enabled or not

uint32_t phy_lr: bit: 3 flag to identify if low rate is enabled or not

uint32_t phy_11ax: bit: 4 flag to identify if 11ax mode is enabled or not

uint32_t is_mesh_child: bit: 5 flag to identify mesh child

uint32_t reserved: bit: 6..31 reserved

struct wifi_sta_list_t

List of stations associated with the Soft-AP.

Public Members

wifi_sta_info_t sta[ESP_WIFI_MAX_CONN_NUM]: station list

int num: number of stations in the list (other entries are invalid)

struct vendor_ie_data_t

Vendor Information Element header.

The first bytes of the Information Element will match this header. Payload follows.

Public Members

uint8_t element_id: Should be set to WIFI_VENDOR_IE_ELEMENT_ID (0xDD)

uint8_t length: Length of all bytes in the element data following this field. Minimum 4.

uint8_t vendor_oui[3]: Vendor identifier (OUI).

uint8_t vendor_oui_type: Vendor-specific OUI type.

uint8_t payload[0]: Payload. Length is equal to value in 'length' field, minus 4.

struct wifi_promiscuous_pkt_t

Payload passed to 'buf' parameter of promiscuous mode RX callback.

Public Members

wifi_pkt_rx_ctrl_t rx_ctrl: metadata header

uint8_t payload[0]: Data or management payload. Length of payload is described by rx_ctrl.sig_len. Type of content determined by packet type argument of callback.

struct wifi_promiscuous_filter_t

Mask for filtering different packet types in promiscuous mode.

Public Members

uint32_t filter_mask: OR of one or more filter values WIFI_PROMIS_FILTER_*

struct wifi_csi_info_t

CSI data type.

Public Members

wifi_pkt_rx_ctrl_t rx_ctrl: received packet radio metadata header of the CSI data

uint8_t mac[6]: source MAC address of the CSI data

uint8_t dmac[6]: destination MAC address of the CSI data

bool first_word_invalid: first four bytes of the CSI data is invalid or not, true indicates the first four bytes is invalid due to hardware limition

int8_t *buf: valid buffer of CSI data

uint16_t len: valid length of CSI data

uint8_t *hdr: header of the wifi packet

uint8_t *payload: payload of the wifi packet

uint16_t payload_len: payload len of the wifi packet

uint16_t rx_seq: rx sequence number of the wifi packet

struct wifi_ant_gpio_t

WiFi GPIO configuration for antenna selection.

Public Members

uint8_t gpio_select: Whether this GPIO is connected to external antenna switch

uint8_t gpio_num: The GPIO number that connects to external antenna switch

struct wifi_ant_gpio_config_t

WiFi GPIOs configuration for antenna selection.

Public Members

wifi_ant_gpio_t gpio_cfg[4]: The configurations of GPIOs that connect to external antenna switch

struct wifi_ant_config_t

WiFi antenna configuration.

Public Members

wifi_ant_mode_t rx_ant_mode: WiFi antenna mode for receiving

wifi_ant_t rx_ant_default: Default antenna mode for receiving, it's ignored if rx_ant_mode is not WIFI_ANT_MODE_AUTO

wifi_ant_mode_t tx_ant_mode: WiFi antenna mode for transmission, it can be set to WIFI_ANT_MODE_AUTO only if rx_ant_mode is set to WIFI_ANT_MODE_AUTO

uint8_t enabled_ant0: Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT0

uint8_t enabled_ant1: Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT1

struct wifi_action_tx_req_t

Action Frame Tx Request.

Public Members

wifi_interface_t ifx: WiFi interface to send request to

uint8_t dest_mac[6]: Destination MAC address

bool no_ack: Indicates no ack required

wifi_action_rx_cb_t rx_cb: Rx Callback to receive any response

uint32_t data_len: Length of the appended Data

uint8_t data[0]: Appended Data payload

struct wifi_ftm_initiator_cfg_t

FTM Initiator configuration.

Public Members

uint8_t resp_mac[6]: MAC address of the FTM Responder

uint8_t channel: Primary channel of the FTM Responder

uint8_t frm_count: No. of FTM frames requested in terms of 4 or 8 bursts (allowed values - 0(No pref), 16, 24, 32, 64)

uint16_t burst_period: Requested period between FTM bursts in 100's of milliseconds (allowed values 0(No pref) - 100)

bool use_get_report_api: True - Using esp_wifi_ftm_get_report to get FTM report, False - Using ftm_report_data from WIFI_EVENT_FTM_REPORT to get FTM report

struct wifi_beacon_monitor_config_t

WiFi beacon monitor parameter configuration.

Public Members

bool enable: Enable or disable beacon monitor

uint8_t loss_timeout: Beacon lost timeout

uint8_t loss_threshold: Maximum number of consecutive lost beacons allowed

uint8_t delta_intr_early: Delta early time for RF PHY on

uint8_t delta_loss_timeout: Delta timeout time for RF PHY off

uint8_t beacon_abort: Enable or disable beacon abort

uint8_t broadcast_wakeup: Enable or disable TIM element multicast wakeup

uint8_t reserved: Reserved

uint8_t tsf_time_sync_deviation: Deviation range to sync with AP TSF timestamp

uint16_t modem_state_consecutive: PMU MODEM state consecutive count limit

uint16_t rf_ctrl_wait_cycle: RF on wait time (unit: Modem APB clock cycle)

struct wifi_nan_publish_cfg_t

NAN Publish service configuration parameters.

Public Members

char service_name[ESP_WIFI_MAX_SVC_NAME_LEN]: Service name identifier

wifi_nan_service_type_t type: Service type

char matching_filter[ESP_WIFI_MAX_FILTER_LEN]: Comma separated filters for filtering services

char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Service info shared in Publish frame

uint8_t single_replied_event: Give single Replied event or every time

uint8_t datapath_reqd: NAN Datapath required for the service

uint8_t reserved: Reserved

struct wifi_nan_subscribe_cfg_t

NAN Subscribe service configuration parameters.

Public Members

char service_name[ESP_WIFI_MAX_SVC_NAME_LEN]: Service name identifier

wifi_nan_service_type_t type: Service type

char matching_filter[ESP_WIFI_MAX_FILTER_LEN]: Comma separated filters for filtering services

char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Service info shared in Subscribe frame

uint8_t single_match_event: Give single Match event or every time

uint8_t reserved: Reserved

struct wifi_nan_followup_params_t

NAN Follow-up parameters.

Public Members

uint8_t inst_id: Own service instance id

uint8_t peer_inst_id: Peer's service instance id

uint8_t peer_mac[6]: Peer's MAC address

char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Service info(or message) to be shared

struct wifi_nan_datapath_req_t

NAN Datapath Request parameters.

Public Members

uint8_t pub_id: Publisher's service instance id

uint8_t peer_mac[6]: Peer's MAC address

bool confirm_required: NDP Confirm frame required

struct wifi_nan_datapath_resp_t

NAN Datapath Response parameters.

Public Members

bool accept: True - Accept incoming NDP, False - Reject it

uint8_t ndp_id: NAN Datapath Identifier

uint8_t peer_mac[6]: Peer's MAC address

struct wifi_nan_datapath_end_req_t

NAN Datapath End parameters.

Public Members

uint8_t ndp_id: NAN Datapath Identifier

uint8_t peer_mac[6]: Peer's MAC address

struct wifi_event_sta_scan_done_t

Argument structure for WIFI_EVENT_SCAN_DONE event

Public Members

uint32_t status: status of scanning APs: 0 — success, 1 - failure

uint8_t number: number of scan results

uint8_t scan_id: scan sequence number, used for block scan

struct wifi_event_sta_connected_t

Argument structure for WIFI_EVENT_STA_CONNECTED event

Public Members

uint8_t ssid[32]: SSID of connected AP

uint8_t ssid_len: SSID length of connected AP

uint8_t bssid[6]: BSSID of connected AP

uint8_t channel: channel of connected AP

wifi_auth_mode_t authmode: authentication mode used by AP

uint16_t aid: authentication id assigned by the connected AP

struct wifi_event_sta_disconnected_t

Argument structure for WIFI_EVENT_STA_DISCONNECTED event

Public Members

uint8_t ssid[32]: SSID of disconnected AP

uint8_t ssid_len: SSID length of disconnected AP

uint8_t bssid[6]: BSSID of disconnected AP

uint8_t reason: reason of disconnection

int8_t rssi: rssi of disconnection

struct wifi_event_sta_authmode_change_t

Argument structure for WIFI_EVENT_STA_AUTHMODE_CHANGE event

Public Members

wifi_auth_mode_t old_mode: the old auth mode of AP

wifi_auth_mode_t new_mode: the new auth mode of AP

struct wifi_event_sta_wps_er_pin_t

Argument structure for WIFI_EVENT_STA_WPS_ER_PIN event

Public Members

uint8_t pin_code[8]: PIN code of station in enrollee mode

struct wifi_event_sta_wps_er_success_t

Argument structure for WIFI_EVENT_STA_WPS_ER_SUCCESS event

Public Members

uint8_t ap_cred_cnt: Number of AP credentials received

uint8_t ssid[MAX_SSID_LEN]: SSID of AP

uint8_t passphrase[MAX_PASSPHRASE_LEN]: Passphrase for the AP

struct wifi_event_sta_wps_er_success_t::[anonymous] ap_cred[MAX_WPS_AP_CRED]: All AP credentials received from WPS handshake

struct wifi_event_ap_staconnected_t

Argument structure for WIFI_EVENT_AP_STACONNECTED event

Public Members

uint8_t mac[6]: MAC address of the station connected to Soft-AP

uint8_t aid: the aid that soft-AP gives to the station connected to

bool is_mesh_child: flag to identify mesh child

struct wifi_event_ap_stadisconnected_t

Argument structure for WIFI_EVENT_AP_STADISCONNECTED event

Public Members

uint8_t mac[6]: MAC address of the station disconnects to soft-AP

uint8_t aid: the aid that soft-AP gave to the station disconnects to

bool is_mesh_child: flag to identify mesh child

uint8_t reason: reason of disconnection

struct wifi_event_ap_probe_req_rx_t

Argument structure for WIFI_EVENT_AP_PROBEREQRECVED event

Public Members

int rssi: Received probe request signal strength

uint8_t mac[6]: MAC address of the station which send probe request

struct wifi_event_bss_rssi_low_t

Argument structure for WIFI_EVENT_STA_BSS_RSSI_LOW event

Public Members

int32_t rssi: RSSI value of bss

struct wifi_event_home_channel_change_t

Argument structure for WIFI_EVENT_HOME_CHANNEL_CHANGE event

Public Members

uint8_t old_chan: old home channel of the device

wifi_second_chan_t old_snd: old second channel of the device

uint8_t new_chan: new home channel of the device

wifi_second_chan_t new_snd: new second channel of the device

struct wifi_ftm_report_entry_t

Argument structure for

Public Members

uint8_t dlog_token: Dialog Token of the FTM frame

int8_t rssi: RSSI of the FTM frame received

uint32_t rtt: Round Trip Time in pSec with a peer

uint64_t t1: Time of departure of FTM frame from FTM Responder in pSec

uint64_t t2: Time of arrival of FTM frame at FTM Initiator in pSec

uint64_t t3: Time of departure of ACK from FTM Initiator in pSec

uint64_t t4: Time of arrival of ACK at FTM Responder in pSec

struct wifi_event_ftm_report_t

Argument structure for WIFI_EVENT_FTM_REPORT event

Public Members

uint8_t peer_mac[6]: MAC address of the FTM Peer

wifi_ftm_status_t status: Status of the FTM operation

uint32_t rtt_raw: Raw average Round-Trip-Time with peer in Nano-Seconds

uint32_t rtt_est: Estimated Round-Trip-Time with peer in Nano-Seconds

uint32_t dist_est: Estimated one-way distance in Centi-Meters

wifi_ftm_report_entry_t *ftm_report_data: Pointer to FTM Report, should be freed after use. Note: Highly recommended to use API esp_wifi_ftm_get_report to get the report instead of using this

uint8_t ftm_report_num_entries: Number of entries in the FTM Report data

struct wifi_event_action_tx_status_t

Argument structure for WIFI_EVENT_ACTION_TX_STATUS event

Public Members

wifi_interface_t ifx: WiFi interface to send request to

uint32_t context: Context to identify the request

uint8_t da[6]: Destination MAC address

uint8_t status: Status of the operation

struct wifi_event_roc_done_t

Argument structure for WIFI_EVENT_ROC_DONE event

Public Members

uint32_t context: Context to identify the request

struct wifi_event_ap_wps_rg_pin_t

Argument structure for WIFI_EVENT_AP_WPS_RG_PIN event

Public Members

uint8_t pin_code[8]: PIN code of station in enrollee mode

struct wifi_event_ap_wps_rg_fail_reason_t

Argument structure for WIFI_EVENT_AP_WPS_RG_FAILED event

Public Members

wps_fail_reason_t reason: WPS failure reason wps_fail_reason_t

uint8_t peer_macaddr[6]: Enrollee mac address

struct wifi_event_ap_wps_rg_success_t

Argument structure for WIFI_EVENT_AP_WPS_RG_SUCCESS event

Public Members

uint8_t peer_macaddr[6]: Enrollee mac address

struct wifi_event_nan_svc_match_t

Argument structure for WIFI_EVENT_NAN_SVC_MATCH event

Public Members

uint8_t subscribe_id: Subscribe Service Identifier

uint8_t publish_id: Publish Service Identifier

uint8_t pub_if_mac[6]: NAN Interface MAC of the Publisher

bool update_pub_id: Indicates whether publisher's service ID needs to be updated

struct wifi_event_nan_replied_t

Argument structure for WIFI_EVENT_NAN_REPLIED event

Public Members

uint8_t publish_id: Publish Service Identifier

uint8_t subscribe_id: Subscribe Service Identifier

uint8_t sub_if_mac[6]: NAN Interface MAC of the Subscriber

struct wifi_event_nan_receive_t

Argument structure for WIFI_EVENT_NAN_RECEIVE event

Public Members

uint8_t inst_id: Our Service Identifier

uint8_t peer_inst_id: Peer's Service Identifier

uint8_t peer_if_mac[6]: Peer's NAN Interface MAC

uint8_t peer_svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Peer Service Info

struct wifi_event_ndp_indication_t

Argument structure for WIFI_EVENT_NDP_INDICATION event

Public Members

uint8_t publish_id: Publish Id for NAN Service

uint8_t ndp_id: NDP instance id

uint8_t peer_nmi[6]: Peer's NAN Management Interface MAC

uint8_t peer_ndi[6]: Peer's NAN Data Interface MAC

uint8_t svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Service Specific Info

struct wifi_event_ndp_confirm_t

Argument structure for WIFI_EVENT_NDP_CONFIRM event

Public Members

uint8_t status: NDP status code

uint8_t ndp_id: NDP instance id

uint8_t peer_nmi[6]: Peer's NAN Management Interface MAC

uint8_t peer_ndi[6]: Peer's NAN Data Interface MAC

uint8_t own_ndi[6]: Own NAN Data Interface MAC

uint8_t svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]: Service Specific Info

struct wifi_event_ndp_terminated_t

Argument structure for WIFI_EVENT_NDP_TERMINATED event

Public Members

uint8_t reason: Termination reason code

uint8_t ndp_id: NDP instance id

uint8_t init_ndi[6]: Initiator's NAN Data Interface MAC

Macros

WIFI_OFFCHAN_TX_REQ

WIFI_OFFCHAN_TX_CANCEL

WIFI_ROC_REQ

WIFI_ROC_CANCEL

WIFI_PROTOCOL_11B

WIFI_PROTOCOL_11G

WIFI_PROTOCOL_11N

WIFI_PROTOCOL_LR

WIFI_PROTOCOL_11AX

SAE_H2E_IDENTIFIER_LEN

ESP_WIFI_MAX_CONN_NUM: max number of stations which can connect to ESP32C3 soft-AP

WIFI_VENDOR_IE_ELEMENT_ID

WIFI_PROMIS_FILTER_MASK_ALL: filter all packets

WIFI_PROMIS_FILTER_MASK_MGMT: filter the packets with type of WIFI_PKT_MGMT

WIFI_PROMIS_FILTER_MASK_CTRL: filter the packets with type of WIFI_PKT_CTRL

WIFI_PROMIS_FILTER_MASK_DATA: filter the packets with type of WIFI_PKT_DATA

WIFI_PROMIS_FILTER_MASK_MISC: filter the packets with type of WIFI_PKT_MISC

WIFI_PROMIS_FILTER_MASK_DATA_MPDU: filter the MPDU which is a kind of WIFI_PKT_DATA

WIFI_PROMIS_FILTER_MASK_DATA_AMPDU: filter the AMPDU which is a kind of WIFI_PKT_DATA

WIFI_PROMIS_FILTER_MASK_FCSFAIL: filter the FCS failed packets, do not open it in general

WIFI_PROMIS_CTRL_FILTER_MASK_ALL: filter all control packets

WIFI_PROMIS_CTRL_FILTER_MASK_WRAPPER: filter the control packets with subtype of Control Wrapper

WIFI_PROMIS_CTRL_FILTER_MASK_BAR: filter the control packets with subtype of Block Ack Request

WIFI_PROMIS_CTRL_FILTER_MASK_BA: filter the control packets with subtype of Block Ack

WIFI_PROMIS_CTRL_FILTER_MASK_PSPOLL: filter the control packets with subtype of PS-Poll

WIFI_PROMIS_CTRL_FILTER_MASK_RTS: filter the control packets with subtype of RTS

WIFI_PROMIS_CTRL_FILTER_MASK_CTS: filter the control packets with subtype of CTS

WIFI_PROMIS_CTRL_FILTER_MASK_ACK: filter the control packets with subtype of ACK

WIFI_PROMIS_CTRL_FILTER_MASK_CFEND: filter the control packets with subtype of CF-END

WIFI_PROMIS_CTRL_FILTER_MASK_CFENDACK: filter the control packets with subtype of CF-END+CF-ACK

WIFI_EVENT_MASK_ALL: mask all WiFi events

WIFI_EVENT_MASK_NONE: mask none of the WiFi events

WIFI_EVENT_MASK_AP_PROBEREQRECVED: mask SYSTEM_EVENT_AP_PROBEREQRECVED event

ESP_WIFI_NAN_MAX_SVC_SUPPORTED

ESP_WIFI_NAN_DATAPATH_MAX_PEERS

ESP_WIFI_NDP_ROLE_INITIATOR

ESP_WIFI_NDP_ROLE_RESPONDER

ESP_WIFI_MAX_SVC_NAME_LEN

ESP_WIFI_MAX_FILTER_LEN

ESP_WIFI_MAX_SVC_INFO_LEN

MAX_SSID_LEN

MAX_PASSPHRASE_LEN

MAX_WPS_AP_CRED

WIFI_STATIS_BUFFER

WIFI_STATIS_RXTX

WIFI_STATIS_HW

WIFI_STATIS_DIAG

WIFI_STATIS_PS

WIFI_STATIS_ALL

Type Definitions

typedef esp_wifi_rxctrl_t wifi_pkt_rx_ctrl_t

typedef wifi_csi_acquire_config_t wifi_csi_config_t: Channel state information(CSI) configuration type.

typedef int (*wifi_action_rx_cb_t)(uint8_t *hdr, uint8_t *payload, size_t len, uint8_t channel)

The Rx callback function of Action Tx operations.

Param hdr: pointer to the IEEE 802.11 Header structure
Param payload: pointer to the Payload following 802.11 Header
Param len: length of the Payload
Param channel: channel number the frame is received on

Enumerations

enum wifi_mode_t

Values:

enumerator WIFI_MODE_NULL: null mode

enumerator WIFI_MODE_STA: WiFi station mode

enumerator WIFI_MODE_AP: WiFi soft-AP mode

enumerator WIFI_MODE_APSTA: WiFi station + soft-AP mode

enumerator WIFI_MODE_NAN: WiFi NAN mode

enumerator WIFI_MODE_MAX

enum wifi_interface_t

Values:

enumerator WIFI_IF_STA

enumerator WIFI_IF_AP

enumerator WIFI_IF_MAX

enum wifi_country_policy_t

Values:

enumerator WIFI_COUNTRY_POLICY_AUTO: Country policy is auto, use the country info of AP to which the station is connected

enumerator WIFI_COUNTRY_POLICY_MANUAL: Country policy is manual, always use the configured country info

enum wifi_auth_mode_t

Values:

enumerator WIFI_AUTH_OPEN: authenticate mode : open

enumerator WIFI_AUTH_WEP: authenticate mode : WEP

enumerator WIFI_AUTH_WPA_PSK: authenticate mode : WPA_PSK

enumerator WIFI_AUTH_WPA2_PSK: authenticate mode : WPA2_PSK

enumerator WIFI_AUTH_WPA_WPA2_PSK: authenticate mode : WPA_WPA2_PSK

enumerator WIFI_AUTH_ENTERPRISE: authenticate mode : WiFi EAP security

enumerator WIFI_AUTH_WPA2_ENTERPRISE: authenticate mode : WiFi EAP security

enumerator WIFI_AUTH_WPA3_PSK: authenticate mode : WPA3_PSK

enumerator WIFI_AUTH_WPA2_WPA3_PSK: authenticate mode : WPA2_WPA3_PSK

enumerator WIFI_AUTH_WAPI_PSK: authenticate mode : WAPI_PSK

enumerator WIFI_AUTH_OWE: authenticate mode : OWE

enumerator WIFI_AUTH_WPA3_ENT_192: authenticate mode : WPA3_ENT_SUITE_B_192_BIT

enumerator WIFI_AUTH_WPA3_EXT_PSK: this authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead.

enumerator WIFI_AUTH_WPA3_EXT_PSK_MIXED_MODE: this authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead.

enumerator WIFI_AUTH_MAX

enum wifi_err_reason_t

Values:

enumerator WIFI_REASON_UNSPECIFIED

enumerator WIFI_REASON_AUTH_EXPIRE

enumerator WIFI_REASON_AUTH_LEAVE

enumerator WIFI_REASON_ASSOC_EXPIRE

enumerator WIFI_REASON_DISASSOC_DUE_TO_INACTIVITY

enumerator WIFI_REASON_ASSOC_TOOMANY

enumerator WIFI_REASON_NOT_AUTHED

enumerator WIFI_REASON_CLASS2_FRAME_FROM_NONAUTH_STA

enumerator WIFI_REASON_NOT_ASSOCED

enumerator WIFI_REASON_CLASS3_FRAME_FROM_NONASSOC_STA

enumerator WIFI_REASON_ASSOC_LEAVE

enumerator WIFI_REASON_ASSOC_NOT_AUTHED

enumerator WIFI_REASON_DISASSOC_PWRCAP_BAD

enumerator WIFI_REASON_DISASSOC_SUPCHAN_BAD

enumerator WIFI_REASON_BSS_TRANSITION_DISASSOC

enumerator WIFI_REASON_IE_INVALID

enumerator WIFI_REASON_MIC_FAILURE

enumerator WIFI_REASON_4WAY_HANDSHAKE_TIMEOUT

enumerator WIFI_REASON_GROUP_KEY_UPDATE_TIMEOUT

enumerator WIFI_REASON_IE_IN_4WAY_DIFFERS

enumerator WIFI_REASON_GROUP_CIPHER_INVALID

enumerator WIFI_REASON_PAIRWISE_CIPHER_INVALID

enumerator WIFI_REASON_AKMP_INVALID

enumerator WIFI_REASON_UNSUPP_RSN_IE_VERSION

enumerator WIFI_REASON_INVALID_RSN_IE_CAP

enumerator WIFI_REASON_802_1X_AUTH_FAILED

enumerator WIFI_REASON_CIPHER_SUITE_REJECTED

enumerator WIFI_REASON_TDLS_PEER_UNREACHABLE

enumerator WIFI_REASON_TDLS_UNSPECIFIED

enumerator WIFI_REASON_SSP_REQUESTED_DISASSOC

enumerator WIFI_REASON_NO_SSP_ROAMING_AGREEMENT

enumerator WIFI_REASON_BAD_CIPHER_OR_AKM

enumerator WIFI_REASON_NOT_AUTHORIZED_THIS_LOCATION

enumerator WIFI_REASON_SERVICE_CHANGE_PERCLUDES_TS

enumerator WIFI_REASON_UNSPECIFIED_QOS

enumerator WIFI_REASON_NOT_ENOUGH_BANDWIDTH

enumerator WIFI_REASON_MISSING_ACKS

enumerator WIFI_REASON_EXCEEDED_TXOP

enumerator WIFI_REASON_STA_LEAVING

enumerator WIFI_REASON_END_BA

enumerator WIFI_REASON_UNKNOWN_BA

enumerator WIFI_REASON_TIMEOUT

enumerator WIFI_REASON_PEER_INITIATED

enumerator WIFI_REASON_AP_INITIATED

enumerator WIFI_REASON_INVALID_FT_ACTION_FRAME_COUNT

enumerator WIFI_REASON_INVALID_PMKID

enumerator WIFI_REASON_INVALID_MDE

enumerator WIFI_REASON_INVALID_FTE

enumerator WIFI_REASON_TRANSMISSION_LINK_ESTABLISH_FAILED

enumerator WIFI_REASON_ALTERATIVE_CHANNEL_OCCUPIED

enumerator WIFI_REASON_BEACON_TIMEOUT

enumerator WIFI_REASON_NO_AP_FOUND

enumerator WIFI_REASON_AUTH_FAIL

enumerator WIFI_REASON_ASSOC_FAIL

enumerator WIFI_REASON_HANDSHAKE_TIMEOUT

enumerator WIFI_REASON_CONNECTION_FAIL

enumerator WIFI_REASON_AP_TSF_RESET

enumerator WIFI_REASON_ROAMING

enumerator WIFI_REASON_ASSOC_COMEBACK_TIME_TOO_LONG

enumerator WIFI_REASON_SA_QUERY_TIMEOUT

enumerator WIFI_REASON_NO_AP_FOUND_W_COMPATIBLE_SECURITY

enumerator WIFI_REASON_NO_AP_FOUND_IN_AUTHMODE_THRESHOLD

enumerator WIFI_REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD

enum wifi_second_chan_t

Values:

enumerator WIFI_SECOND_CHAN_NONE: the channel width is HT20

enumerator WIFI_SECOND_CHAN_ABOVE: the channel width is HT40 and the secondary channel is above the primary channel

enumerator WIFI_SECOND_CHAN_BELOW: the channel width is HT40 and the secondary channel is below the primary channel

enum wifi_scan_type_t

Values:

enumerator WIFI_SCAN_TYPE_ACTIVE: active scan

enumerator WIFI_SCAN_TYPE_PASSIVE: passive scan

enum wifi_cipher_type_t

Values:

enumerator WIFI_CIPHER_TYPE_NONE: the cipher type is none

enumerator WIFI_CIPHER_TYPE_WEP40: the cipher type is WEP40

enumerator WIFI_CIPHER_TYPE_WEP104: the cipher type is WEP104

enumerator WIFI_CIPHER_TYPE_TKIP: the cipher type is TKIP

enumerator WIFI_CIPHER_TYPE_CCMP: the cipher type is CCMP

enumerator WIFI_CIPHER_TYPE_TKIP_CCMP: the cipher type is TKIP and CCMP

enumerator WIFI_CIPHER_TYPE_AES_CMAC128: the cipher type is AES-CMAC-128

enumerator WIFI_CIPHER_TYPE_SMS4: the cipher type is SMS4

enumerator WIFI_CIPHER_TYPE_GCMP: the cipher type is GCMP

enumerator WIFI_CIPHER_TYPE_GCMP256: the cipher type is GCMP-256

enumerator WIFI_CIPHER_TYPE_AES_GMAC128: the cipher type is AES-GMAC-128

enumerator WIFI_CIPHER_TYPE_AES_GMAC256: the cipher type is AES-GMAC-256

enumerator WIFI_CIPHER_TYPE_UNKNOWN: the cipher type is unknown

enum wifi_ant_t

WiFi antenna.

Values:

enumerator WIFI_ANT_ANT0: WiFi antenna 0

enumerator WIFI_ANT_ANT1: WiFi antenna 1

enumerator WIFI_ANT_MAX: Invalid WiFi antenna

enum wifi_scan_method_t

Values:

enumerator WIFI_FAST_SCAN: Do fast scan, scan will end after find SSID match AP

enumerator WIFI_ALL_CHANNEL_SCAN: All channel scan, scan will end after scan all the channel

enum wifi_sort_method_t

Values:

enumerator WIFI_CONNECT_AP_BY_SIGNAL: Sort match AP in scan list by RSSI

enumerator WIFI_CONNECT_AP_BY_SECURITY: Sort match AP in scan list by security mode

enum wifi_ps_type_t

Values:

enumerator WIFI_PS_NONE: No power save

enumerator WIFI_PS_MIN_MODEM: Minimum modem power saving. In this mode, station wakes up to receive beacon every DTIM period

enumerator WIFI_PS_MAX_MODEM: Maximum modem power saving. In this mode, interval to receive beacons is determined by the listen_interval parameter in wifi_sta_config_t

enum wifi_bandwidth_t

Values:

enumerator WIFI_BW_HT20

enumerator WIFI_BW_HT40

enum wifi_sae_pwe_method_t

Configuration for SAE PWE derivation

Values:

enumerator WPA3_SAE_PWE_UNSPECIFIED

enumerator WPA3_SAE_PWE_HUNT_AND_PECK

enumerator WPA3_SAE_PWE_HASH_TO_ELEMENT

enumerator WPA3_SAE_PWE_BOTH

enum wifi_sae_pk_mode_t

Configuration for SAE-PK

Values:

enumerator WPA3_SAE_PK_MODE_AUTOMATIC

enumerator WPA3_SAE_PK_MODE_ONLY

enumerator WPA3_SAE_PK_MODE_DISABLED

enum wifi_storage_t

Values:

enumerator WIFI_STORAGE_FLASH: all configuration will store in both memory and flash

enumerator WIFI_STORAGE_RAM: all configuration will only store in the memory

enum wifi_vendor_ie_type_t

Vendor Information Element type.

Determines the frame type that the IE will be associated with.

Values:

enumerator WIFI_VND_IE_TYPE_BEACON

enumerator WIFI_VND_IE_TYPE_PROBE_REQ

enumerator WIFI_VND_IE_TYPE_PROBE_RESP

enumerator WIFI_VND_IE_TYPE_ASSOC_REQ

enumerator WIFI_VND_IE_TYPE_ASSOC_RESP

enum wifi_vendor_ie_id_t

Vendor Information Element index.

Each IE type can have up to two associated vendor ID elements.

Values:

enumerator WIFI_VND_IE_ID_0

enumerator WIFI_VND_IE_ID_1

enum wifi_phy_mode_t

Operation Phymode.

Values:

enumerator WIFI_PHY_MODE_LR: PHY mode for Low Rate

enumerator WIFI_PHY_MODE_11B: PHY mode for 11b

enumerator WIFI_PHY_MODE_11G: PHY mode for 11g

enumerator WIFI_PHY_MODE_HT20: PHY mode for Bandwidth HT20

enumerator WIFI_PHY_MODE_HT40: PHY mode for Bandwidth HT40

enumerator WIFI_PHY_MODE_HE20: PHY mode for Bandwidth HE20

enum wifi_promiscuous_pkt_type_t

Promiscuous frame type.

Passed to promiscuous mode RX callback to indicate the type of parameter in the buffer.

Values:

enumerator WIFI_PKT_MGMT: Management frame, indicates 'buf' argument is wifi_promiscuous_pkt_t

enumerator WIFI_PKT_CTRL: Control frame, indicates 'buf' argument is wifi_promiscuous_pkt_t

enumerator WIFI_PKT_DATA: Data frame, indiciates 'buf' argument is wifi_promiscuous_pkt_t

enumerator WIFI_PKT_MISC: Other type, such as MIMO etc. 'buf' argument is wifi_promiscuous_pkt_t but the payload is zero length.

enum wifi_ant_mode_t

WiFi antenna mode.

Values:

enumerator WIFI_ANT_MODE_ANT0: Enable WiFi antenna 0 only

enumerator WIFI_ANT_MODE_ANT1: Enable WiFi antenna 1 only

enumerator WIFI_ANT_MODE_AUTO: Enable WiFi antenna 0 and 1, automatically select an antenna

enumerator WIFI_ANT_MODE_MAX: Invalid WiFi enabled antenna

enum wifi_nan_service_type_t

NAN Services types.

Values:

enumerator NAN_PUBLISH_SOLICITED: Send unicast Publish frame to Subscribers that match the requirement

enumerator NAN_PUBLISH_UNSOLICITED: Send broadcast Publish frames in every Discovery Window(DW)

enumerator NAN_SUBSCRIBE_ACTIVE: Send broadcast Subscribe frames in every DW

enumerator NAN_SUBSCRIBE_PASSIVE: Passively listens to Publish frames

enum wifi_phy_rate_t

WiFi PHY rate encodings.

Values:

enumerator WIFI_PHY_RATE_1M_L: 1 Mbps with long preamble

enumerator WIFI_PHY_RATE_2M_L: 2 Mbps with long preamble

enumerator WIFI_PHY_RATE_5M_L: 5.5 Mbps with long preamble

enumerator WIFI_PHY_RATE_11M_L: 11 Mbps with long preamble

enumerator WIFI_PHY_RATE_2M_S: 2 Mbps with short preamble

enumerator WIFI_PHY_RATE_5M_S: 5.5 Mbps with short preamble

enumerator WIFI_PHY_RATE_11M_S: 11 Mbps with short preamble

enumerator WIFI_PHY_RATE_48M: 48 Mbps

enumerator WIFI_PHY_RATE_24M: 24 Mbps

enumerator WIFI_PHY_RATE_12M: 12 Mbps

enumerator WIFI_PHY_RATE_6M: 6 Mbps

enumerator WIFI_PHY_RATE_54M: 54 Mbps

enumerator WIFI_PHY_RATE_36M: 36 Mbps

enumerator WIFI_PHY_RATE_18M: 18 Mbps

enumerator WIFI_PHY_RATE_9M: 9 Mbps rate table and guard interval information for each MCS rate

enumerator WIFI_PHY_RATE_MCS0_LGI: MCS0 with long GI

enumerator WIFI_PHY_RATE_MCS1_LGI: MCS1 with long GI

enumerator WIFI_PHY_RATE_MCS2_LGI: MCS2 with long GI

enumerator WIFI_PHY_RATE_MCS3_LGI: MCS3 with long GI

enumerator WIFI_PHY_RATE_MCS4_LGI: MCS4 with long GI

enumerator WIFI_PHY_RATE_MCS5_LGI: MCS5 with long GI

enumerator WIFI_PHY_RATE_MCS6_LGI: MCS6 with long GI

enumerator WIFI_PHY_RATE_MCS7_LGI: MCS7 with long GI

enumerator WIFI_PHY_RATE_MCS8_LGI: MCS8 with long GI

enumerator WIFI_PHY_RATE_MCS9_LGI: MCS9 with long GI

enumerator WIFI_PHY_RATE_MCS0_SGI: MCS0 with short GI

enumerator WIFI_PHY_RATE_MCS1_SGI: MCS1 with short GI

enumerator WIFI_PHY_RATE_MCS2_SGI: MCS2 with short GI

enumerator WIFI_PHY_RATE_MCS3_SGI: MCS3 with short GI

enumerator WIFI_PHY_RATE_MCS4_SGI: MCS4 with short GI

enumerator WIFI_PHY_RATE_MCS5_SGI: MCS5 with short GI

enumerator WIFI_PHY_RATE_MCS6_SGI: MCS6 with short GI

enumerator WIFI_PHY_RATE_MCS7_SGI: MCS7 with short GI

enumerator WIFI_PHY_RATE_MCS8_SGI: MCS8 with short GI

enumerator WIFI_PHY_RATE_MCS9_SGI: MCS9 with short GI

enumerator WIFI_PHY_RATE_LORA_250K: 250 Kbps

enumerator WIFI_PHY_RATE_LORA_500K: 500 Kbps

enumerator WIFI_PHY_RATE_MAX

enum wifi_event_t

WiFi event declarations

Values:

enumerator WIFI_EVENT_WIFI_READY: WiFi ready

enumerator WIFI_EVENT_SCAN_DONE: Finished scanning AP

enumerator WIFI_EVENT_STA_START: Station start

enumerator WIFI_EVENT_STA_STOP: Station stop

enumerator WIFI_EVENT_STA_CONNECTED: Station connected to AP

enumerator WIFI_EVENT_STA_DISCONNECTED: Station disconnected from AP

enumerator WIFI_EVENT_STA_AUTHMODE_CHANGE: the auth mode of AP connected by device's station changed

enumerator WIFI_EVENT_STA_WPS_ER_SUCCESS: Station wps succeeds in enrollee mode

enumerator WIFI_EVENT_STA_WPS_ER_FAILED: Station wps fails in enrollee mode

enumerator WIFI_EVENT_STA_WPS_ER_TIMEOUT: Station wps timeout in enrollee mode

enumerator WIFI_EVENT_STA_WPS_ER_PIN: Station wps pin code in enrollee mode

enumerator WIFI_EVENT_STA_WPS_ER_PBC_OVERLAP: Station wps overlap in enrollee mode

enumerator WIFI_EVENT_AP_START: Soft-AP start

enumerator WIFI_EVENT_AP_STOP: Soft-AP stop

enumerator WIFI_EVENT_AP_STACONNECTED: a station connected to Soft-AP

enumerator WIFI_EVENT_AP_STADISCONNECTED: a station disconnected from Soft-AP

enumerator WIFI_EVENT_AP_PROBEREQRECVED: Receive probe request packet in soft-AP interface

enumerator WIFI_EVENT_FTM_REPORT: Receive report of FTM procedure

enumerator WIFI_EVENT_STA_BSS_RSSI_LOW: AP's RSSI crossed configured threshold

enumerator WIFI_EVENT_ACTION_TX_STATUS: Status indication of Action Tx operation

enumerator WIFI_EVENT_ROC_DONE: Remain-on-Channel operation complete

enumerator WIFI_EVENT_STA_BEACON_TIMEOUT: Station beacon timeout

enumerator WIFI_EVENT_CONNECTIONLESS_MODULE_WAKE_INTERVAL_START: Connectionless module wake interval start

enumerator WIFI_EVENT_AP_WPS_RG_SUCCESS: Soft-AP wps succeeds in registrar mode

enumerator WIFI_EVENT_AP_WPS_RG_FAILED: Soft-AP wps fails in registrar mode

enumerator WIFI_EVENT_AP_WPS_RG_TIMEOUT: Soft-AP wps timeout in registrar mode

enumerator WIFI_EVENT_AP_WPS_RG_PIN: Soft-AP wps pin code in registrar mode

enumerator WIFI_EVENT_AP_WPS_RG_PBC_OVERLAP: Soft-AP wps overlap in registrar mode

enumerator WIFI_EVENT_ITWT_SETUP: iTWT setup

enumerator WIFI_EVENT_ITWT_TEARDOWN: iTWT teardown

enumerator WIFI_EVENT_ITWT_PROBE: iTWT probe

enumerator WIFI_EVENT_ITWT_SUSPEND: iTWT suspend

enumerator WIFI_EVENT_TWT_WAKEUP: TWT wakeup

enumerator WIFI_EVENT_BTWT_SETUP: bTWT setup

enumerator WIFI_EVENT_BTWT_TEARDOWN: bTWT teardown

enumerator WIFI_EVENT_NAN_STARTED: NAN Discovery has started

enumerator WIFI_EVENT_NAN_STOPPED: NAN Discovery has stopped

enumerator WIFI_EVENT_NAN_SVC_MATCH: NAN Service Discovery match found

enumerator WIFI_EVENT_NAN_REPLIED: Replied to a NAN peer with Service Discovery match

enumerator WIFI_EVENT_NAN_RECEIVE: Received a Follow-up message

enumerator WIFI_EVENT_NDP_INDICATION: Received NDP Request from a NAN Peer

enumerator WIFI_EVENT_NDP_CONFIRM: NDP Confirm Indication

enumerator WIFI_EVENT_NDP_TERMINATED: NAN Datapath terminated indication

enumerator WIFI_EVENT_HOME_CHANNEL_CHANGE: WiFi home channel change，doesn't occur when scanning

enumerator WIFI_EVENT_MAX: Invalid WiFi event ID

enum wifi_event_sta_wps_fail_reason_t

Argument structure for WIFI_EVENT_STA_WPS_ER_FAILED event

Values:

enumerator WPS_FAIL_REASON_NORMAL: WPS normal fail reason

enumerator WPS_FAIL_REASON_RECV_M2D: WPS receive M2D frame

enumerator WPS_FAIL_REASON_RECV_DEAUTH: Recv deauth from AP while wps handshake

enumerator WPS_FAIL_REASON_MAX

enum wifi_ftm_status_t

FTM operation status types.

Values:

enumerator FTM_STATUS_SUCCESS: FTM exchange is successful

enumerator FTM_STATUS_UNSUPPORTED: Peer does not support FTM

enumerator FTM_STATUS_CONF_REJECTED: Peer rejected FTM configuration in FTM Request

enumerator FTM_STATUS_NO_RESPONSE: Peer did not respond to FTM Requests

enumerator FTM_STATUS_FAIL: Unknown error during FTM exchange

enumerator FTM_STATUS_NO_VALID_MSMT: FTM session did not result in any valid measurements

enumerator FTM_STATUS_USER_TERM: User triggered termination

enum wps_fail_reason_t

Values:

enumerator WPS_AP_FAIL_REASON_NORMAL: WPS normal fail reason

enumerator WPS_AP_FAIL_REASON_CONFIG: WPS failed due to incorrect config

enumerator WPS_AP_FAIL_REASON_AUTH: WPS failed during auth

enumerator WPS_AP_FAIL_REASON_MAX

Header File

components/wpa_supplicant/esp_supplicant/include/esp_eap_client.h
This header file can be included with:
#include "esp_eap_client.h"
This header file is a part of the API provided by the wpa_supplicant component. To declare that your component depends on wpa_supplicant, add the following to your CMakeLists.txt:
REQUIRES wpa_supplicant
or
PRIV_REQUIRES wpa_supplicant

Functions

esp_err_t esp_wifi_sta_enterprise_enable(void)

Enable EAP authentication(WiFi Enterprise) for the station mode.

This function enables Extensible Authentication Protocol (EAP) authentication for the Wi-Fi station mode. When EAP authentication is enabled, the ESP device will attempt to authenticate with the configured EAP credentials when connecting to a secure Wi-Fi network.

备注

Before calling this function, ensure that the Wi-Fi configuration and EAP credentials (such as username and password) have been properly set using the appropriate configuration APIs.

返回

ESP_OK: EAP authentication enabled successfully.
ESP_ERR_NO_MEM: Failed to enable EAP authentication due to memory allocation failure.

esp_err_t esp_wifi_sta_enterprise_disable(void)

Disable EAP authentication(WiFi Enterprise) for the station mode.

This function disables Extensible Authentication Protocol (EAP) authentication for the Wi-Fi station mode. When EAP authentication is disabled, the ESP device will not attempt to authenticate using EAP credentials when connecting to a secure Wi-Fi network.

备注

Disabling EAP authentication may cause the device to connect to the Wi-Fi network using other available authentication methods, if configured using esp_wifi_set_config().

返回

ESP_OK: EAP authentication disabled successfully.
ESP_ERR_INVALID_STATE: EAP client is in an invalid state for disabling.

esp_err_t esp_eap_client_set_identity(const unsigned char *identity, int len)

Set identity for PEAP/TTLS authentication method.

This function sets the identity to be used during PEAP/TTLS authentication.

参数

identity -- [in] Pointer to the identity data.
len -- [in] Length of the identity data (limited to 1~127 bytes).

返回

ESP_OK: The identity was set successfully.
ESP_ERR_INVALID_ARG: Invalid argument (len <= 0 or len >= 128).
ESP_ERR_NO_MEM: Memory allocation failure.

void esp_eap_client_clear_identity(void)

Clear the previously set identity for PEAP/TTLS authentication.

This function clears the identity that was previously set for the EAP client. After calling this function, the EAP client will no longer use the previously configured identity during the authentication process.

esp_err_t esp_eap_client_set_username(const unsigned char *username, int len)

Set username for PEAP/TTLS authentication method.

This function sets the username to be used during PEAP/TTLS authentication.

参数

username -- [in] Pointer to the username data.
len -- [in] Length of the username data (limited to 1~127 bytes).

返回

ESP_OK: The username was set successfully.
ESP_ERR_INVALID_ARG: Failed due to an invalid argument (len <= 0 or len >= 128).
ESP_ERR_NO_MEM: Failed due to memory allocation failure.

void esp_eap_client_clear_username(void)

Clear username for PEAP/TTLS method.

This function clears the previously set username for the EAP client.

esp_err_t esp_eap_client_set_password(const unsigned char *password, int len)

Set password for PEAP/TTLS authentication method.

This function sets the password to be used during PEAP/TTLS authentication.

参数

password -- [in] Pointer to the password data.
len -- [in] Length of the password data (len > 0).

返回

ESP_OK: The password was set successfully.
ESP_ERR_INVALID_ARG: Failed due to an invalid argument (len <= 0).
ESP_ERR_NO_MEM: Failed due to memory allocation failure.

void esp_eap_client_clear_password(void)

Clear password for PEAP/TTLS method.

This function clears the previously set password for the EAP client.

esp_err_t esp_eap_client_set_new_password(const unsigned char *new_password, int len)

Set a new password for MSCHAPv2 authentication method.

This function sets the new password to be used during MSCHAPv2 authentication. The new password is used to substitute the old password when an eap-mschapv2 failure request message with error code ERROR_PASSWD_EXPIRED is received.

参数

new_password -- [in] Pointer to the new password data.
len -- [in] Length of the new password data.

返回

ESP_OK: The new password was set successfully.
ESP_ERR_INVALID_ARG: Failed due to an invalid argument (len <= 0).
ESP_ERR_NO_MEM: Failed due to memory allocation failure.

void esp_eap_client_clear_new_password(void)

Clear new password for MSCHAPv2 method.

This function clears the previously set new password for the EAP client.

esp_err_t esp_eap_client_set_ca_cert(const unsigned char *ca_cert, int ca_cert_len)

Set CA certificate for EAP authentication.

This function sets the Certificate Authority (CA) certificate to be used during EAP authentication. The CA certificate is passed to the EAP client module through a global pointer.

参数

ca_cert -- [in] Pointer to the CA certificate data.
ca_cert_len -- [in] Length of the CA certificate data.

返回

ESP_OK: The CA certificate was set successfully.

void esp_eap_client_clear_ca_cert(void)

Clear the previously set Certificate Authority (CA) certificate for EAP authentication.

This function clears the CA certificate that was previously set for the EAP client. After calling this function, the EAP client will no longer use the previously configured CA certificate during the authentication process.

esp_err_t esp_eap_client_set_certificate_and_key(const unsigned char *client_cert, int client_cert_len, const unsigned char *private_key, int private_key_len, const unsigned char *private_key_password, int private_key_passwd_len)

Set client certificate and private key for EAP authentication.

This function sets the client certificate and private key to be used during authentication. Optionally, a private key password can be provided for encrypted private keys.

Attention: 1. The client certificate, private key, and private key password are provided as pointers to the respective data arrays.
Attention: 2. The client_cert, private_key, and private_key_password should be zero-terminated.

参数

client_cert -- [in] Pointer to the client certificate data.
client_cert_len -- [in] Length of the client certificate data.
private_key -- [in] Pointer to the private key data.
private_key_len -- [in] Length of the private key data (limited to 1~4096 bytes).
private_key_password -- [in] Pointer to the private key password data (optional).
private_key_passwd_len -- [in] Length of the private key password data (can be 0 for no password).

返回

ESP_OK: The certificate, private key, and password (if provided) were set successfully.

void esp_eap_client_clear_certificate_and_key(void)

Clear the previously set client certificate and private key for EAP authentication.

This function clears the client certificate and private key that were previously set for the EAP client. After calling this function, the EAP client will no longer use the previously configured certificate and private key during the authentication process.

esp_err_t esp_eap_client_set_disable_time_check(bool disable)

Set EAP client certificates time check (disable or not).

This function enables or disables the time check for EAP client certificates. When disabled, the certificates' expiration time will not be checked during the authentication process.

参数

disable -- [in] True to disable EAP client certificates time check, false to enable it.

返回

ESP_OK: The EAP client certificates time check setting was updated successfully.

esp_err_t esp_eap_client_get_disable_time_check(bool *disable)

Get EAP client certificates time check status.

This function retrieves the current status of the EAP client certificates time check.

参数

disable -- [out] Pointer to a boolean variable to store the disable status.

返回

ESP_OK: The status of EAP client certificates time check was retrieved successfully.

esp_err_t esp_eap_client_set_ttls_phase2_method(esp_eap_ttls_phase2_types type)

Set EAP-TTLS phase 2 method.

This function sets the phase 2 method to be used during EAP-TTLS authentication.

参数

type -- [in] The type of phase 2 method to be used (e.g., EAP, MSCHAPv2, MSCHAP, PAP, CHAP).

返回

ESP_OK: The EAP-TTLS phase 2 method was set successfully.

esp_err_t esp_eap_client_set_suiteb_192bit_certification(bool enable)

Enable or disable Suite-B 192-bit certification checks.

This function enables or disables the 192-bit Suite-B certification checks during EAP-TLS authentication. Suite-B is a set of cryptographic algorithms which generally are considered more secure.

参数

enable -- [in] True to enable 192-bit Suite-B certification checks, false to disable it.

返回

ESP_OK: The 192-bit Suite-B certification checks were set successfully.

esp_err_t esp_eap_client_set_pac_file(const unsigned char *pac_file, int pac_file_len)

Set the PAC (Protected Access Credential) file for EAP-FAST authentication.

EAP-FAST requires a PAC file that contains the client's credentials.

Attention: 1. For files read from the file system, length has to be decremented by 1 byte.
Attention: 2. Disabling the ESP_WIFI_MBEDTLS_TLS_CLIENT config is required to use EAP-FAST.

参数

pac_file -- [in] Pointer to the PAC file buffer.
pac_file_len -- [in] Length of the PAC file buffer.

返回

ESP_OK: The PAC file for EAP-FAST authentication was set successfully.

esp_err_t esp_eap_client_set_fast_params(esp_eap_fast_config config)

Set the parameters for EAP-FAST Phase 1 authentication.

EAP-FAST supports Fast Provisioning, where clients can be authenticated faster using precomputed keys (PAC). This function allows configuring parameters for Fast Provisioning.

Attention: 1. Disabling the ESP_WIFI_MBEDTLS_TLS_CLIENT config is required to use EAP-FAST.

参数

config -- [in] Configuration structure with Fast Provisioning parameters.

返回

ESP_OK: The parameters for EAP-FAST Phase 1 authentication were set successfully.

esp_err_t esp_eap_client_use_default_cert_bundle(bool use_default_bundle)

Use the default certificate bundle for EAP authentication.

By default, the EAP client uses a built-in certificate bundle for server verification. Enabling this option allows the use of the default certificate bundle.

参数

use_default_bundle -- [in] True to use the default certificate bundle, false to use a custom bundle.

返回

ESP_OK: The option to use the default certificate bundle was set successfully.

Structures

struct esp_eap_fast_config

Configuration settings for EAP-FAST (Extensible Authentication Protocol - Flexible Authentication via Secure Tunneling).

This structure defines the configuration options that can be used to customize the behavior of the EAP-FAST authentication protocol, specifically for Fast Provisioning and PAC (Protected Access Credential) handling.

Public Members

int fast_provisioning: Enable or disable Fast Provisioning in EAP-FAST (0 = disabled, 1 = enabled)

int fast_max_pac_list_len: Maximum length of the PAC (Protected Access Credential) list

bool fast_pac_format_binary: Set to true for binary format PAC, false for ASCII format PAC

Enumerations

enum esp_eap_ttls_phase2_types

Enumeration of phase 2 authentication types for EAP-TTLS.

This enumeration defines the supported phase 2 authentication methods that can be used in the EAP-TTLS (Extensible Authentication Protocol - Tunneled Transport Layer Security) protocol for the second authentication phase.

Values:

enumerator ESP_EAP_TTLS_PHASE2_EAP: EAP (Extensible Authentication Protocol)

enumerator ESP_EAP_TTLS_PHASE2_MSCHAPV2: MS-CHAPv2 (Microsoft Challenge Handshake Authentication Protocol - Version 2)

enumerator ESP_EAP_TTLS_PHASE2_MSCHAP: MS-CHAP (Microsoft Challenge Handshake Authentication Protocol)

enumerator ESP_EAP_TTLS_PHASE2_PAP: PAP (Password Authentication Protocol)

enumerator ESP_EAP_TTLS_PHASE2_CHAP: CHAP (Challenge Handshake Authentication Protocol)

Header File

components/wpa_supplicant/esp_supplicant/include/esp_wps.h
This header file can be included with:
#include "esp_wps.h"
This header file is a part of the API provided by the wpa_supplicant component. To declare that your component depends on wpa_supplicant, add the following to your CMakeLists.txt:
REQUIRES wpa_supplicant
or
PRIV_REQUIRES wpa_supplicant

Functions

esp_err_t esp_wifi_wps_enable(const esp_wps_config_t *config)

Enable Wi-Fi WPS function.

参数

config -- : WPS config to be used in connection

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_TYPE : wps type is invalid
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on
ESP_FAIL : wps initialization fails

esp_err_t esp_wifi_wps_disable(void)

Disable Wi-Fi WPS function and release resource it taken.

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on

esp_err_t esp_wifi_wps_start(int timeout_ms)

Start WPS session.

Attention: WPS can only be used when station is enabled. WPS needs to be enabled first for using this API.

参数

timeout_ms -- : deprecated: This argument's value will have not effect in functionality of API. The argument will be removed in future. The app should start WPS and register for WIFI events to get the status. WPS status is updated through WPS events. See wifi_event_t enum for more info.

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_TYPE : wps type is invalid
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on
ESP_ERR_WIFI_WPS_SM : wps state machine is not initialized
ESP_FAIL : wps initialization fails

esp_err_t esp_wifi_ap_wps_enable(const esp_wps_config_t *config)

Enable Wi-Fi AP WPS function.

Attention: WPS can only be used when softAP is enabled.

参数

config -- wps configuration to be used.

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_TYPE : wps type is invalid
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on
ESP_FAIL : wps initialization fails

esp_err_t esp_wifi_ap_wps_disable(void)

Disable Wi-Fi SoftAP WPS function and release resource it taken.

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on

esp_err_t esp_wifi_ap_wps_start(const unsigned char *pin)

WPS starts to work.

Attention: WPS can only be used when softAP is enabled.

参数

pin -- : Pin to be used in case of WPS mode is pin. If Pin is not provided, device will use the pin generated/provided during esp_wifi_ap_wps_enable() and reported in WIFI_EVENT_AP_WPS_RG_PIN

返回

ESP_OK : succeed
ESP_ERR_WIFI_WPS_TYPE : wps type is invalid
ESP_ERR_WIFI_WPS_MODE : wifi is not in station mode or sniffer mode is on
ESP_ERR_WIFI_WPS_SM : wps state machine is not initialized
ESP_FAIL : wps initialization fails

Structures

struct wps_factory_information_t

Structure representing WPS factory information for ESP device.

This structure holds various strings representing factory information for a device, such as the manufacturer, model number, model name, and device name. Each string is a null-terminated character array. If any of the strings are empty, the default values are used.

Public Members

char manufacturer[WPS_MAX_MANUFACTURER_LEN]: Manufacturer of the device. If empty, the default manufacturer is used.

char model_number[WPS_MAX_MODEL_NUMBER_LEN]: Model number of the device. If empty, the default model number is used.

char model_name[WPS_MAX_MODEL_NAME_LEN]: Model name of the device. If empty, the default model name is used.

char device_name[WPS_MAX_DEVICE_NAME_LEN]: Device name. If empty, the default device name is used.

struct esp_wps_config_t

Structure representing configuration settings for WPS (Wi-Fi Protected Setup).

This structure encapsulates various configuration settings for WPS, including the WPS type (PBC or PIN), factory information that will be shown in the WPS Information Element (IE), and a PIN if the WPS type is set to PIN.

Public Members

wps_type_t wps_type: The type of WPS to be used (PBC or PIN).

wps_factory_information_t factory_info: Factory information to be shown in the WPS Information Element (IE). Vendor can choose to display their own information.

char pin[PIN_LEN]: WPS PIN (Personal Identification Number) used when wps_type is set to WPS_TYPE_PIN.

Macros

ESP_ERR_WIFI_REGISTRAR: WPS registrar is not supported

ESP_ERR_WIFI_WPS_TYPE: WPS type error

ESP_ERR_WIFI_WPS_SM: WPS state machine is not initialized

WPS_MAX_MANUFACTURER_LEN: Maximum length of the manufacturer name in WPS information

WPS_MAX_MODEL_NUMBER_LEN: Maximum length of the model number in WPS information

WPS_MAX_MODEL_NAME_LEN: Maximum length of the model name in WPS information

WPS_MAX_DEVICE_NAME_LEN: Maximum length of the device name in WPS information

PIN_LEN: The length of the WPS PIN (Personal Identification Number).

WPS_CONFIG_INIT_DEFAULT(type)

Initialize a default WPS configuration structure with specified WPS type.

This macro initializes a esp_wps_config_t structure with default values for the specified WPS type. It sets the WPS type, factory information (including default manufacturer, model number, model name, and device name), and a default PIN value if applicable.

参数

type -- The WPS type to be used (PBC or PIN).

返回

An initialized esp_wps_config_t structure with the specified WPS type and default values.

Type Definitions

typedef enum wps_type wps_type_t: Enumeration of WPS (Wi-Fi Protected Setup) types.

Enumerations

enum wps_type

Enumeration of WPS (Wi-Fi Protected Setup) types.

Values:

enumerator WPS_TYPE_DISABLE: WPS is disabled

enumerator WPS_TYPE_PBC: WPS Push Button Configuration method

enumerator WPS_TYPE_PIN: WPS PIN (Personal Identification Number) method

enumerator WPS_TYPE_MAX: Maximum value for WPS type enumeration

Header File

components/wpa_supplicant/esp_supplicant/include/esp_rrm.h
This header file can be included with:
#include "esp_rrm.h"
This header file is a part of the API provided by the wpa_supplicant component. To declare that your component depends on wpa_supplicant, add the following to your CMakeLists.txt:
REQUIRES wpa_supplicant
or
PRIV_REQUIRES wpa_supplicant

Functions

int esp_rrm_send_neighbor_rep_request(neighbor_rep_request_cb cb, void *cb_ctx)

Send Radio measurement neighbor report request to connected AP.

参数

cb -- callback function for neighbor report
cb_ctx -- callback context

返回

0: success
-1: AP does not support RRM
-2: station not connected to AP

bool esp_rrm_is_rrm_supported_connection(void)

Check RRM capability of connected AP.

返回

true: AP supports RRM
false: AP does not support RRM or station not connected to AP

Type Definitions

typedef void (*neighbor_rep_request_cb)(void *ctx, const uint8_t *report, size_t report_len)

Callback function type to get neighbor report.

Param ctx

neighbor report context

Param report

neighbor report

Param report_len

neighbor report length

Return

void

Header File

components/wpa_supplicant/esp_supplicant/include/esp_wnm.h
This header file can be included with:
#include "esp_wnm.h"
This header file is a part of the API provided by the wpa_supplicant component. To declare that your component depends on wpa_supplicant, add the following to your CMakeLists.txt:
REQUIRES wpa_supplicant
or
PRIV_REQUIRES wpa_supplicant

Functions

int esp_wnm_send_bss_transition_mgmt_query(enum btm_query_reason query_reason, const char *btm_candidates, int cand_list)

Send bss transition query to connected AP.

参数

query_reason -- reason for sending query
btm_candidates -- btm candidates list if available
cand_list -- whether candidate list to be included from scan results available in supplicant's cache.

返回

0: success
-1: AP does not support BTM
-2: station not connected to AP

bool esp_wnm_is_btm_supported_connection(void)

Check bss trasition capability of connected AP.

返回

true: AP supports BTM
false: AP does not support BTM or station not connected to AP

Enumerations

enum btm_query_reason

enum btm_query_reason: Reason code for sending btm query

Values:

enumerator REASON_UNSPECIFIED

enumerator REASON_FRAME_LOSS

enumerator REASON_DELAY

enumerator REASON_BANDWIDTH

enumerator REASON_LOAD_BALANCE

enumerator REASON_RSSI

enumerator REASON_RETRANSMISSIONS

enumerator REASON_INTERFERENCE

enumerator REASON_GRAY_ZONE

enumerator REASON_PREMIUM_AP

Header File

components/wpa_supplicant/esp_supplicant/include/esp_mbo.h
This header file can be included with:
#include "esp_mbo.h"
This header file is a part of the API provided by the wpa_supplicant component. To declare that your component depends on wpa_supplicant, add the following to your CMakeLists.txt:
REQUIRES wpa_supplicant
or
PRIV_REQUIRES wpa_supplicant

Functions

int esp_mbo_update_non_pref_chan(struct non_pref_chan_s *non_pref_chan)

Update channel preference for MBO IE.

参数

non_pref_chan -- Non preference channel list

返回

0: success else failure

Structures

struct non_pref_chan

Structure representing a non-preferred channel in a wireless network.

This structure encapsulates information about a non-preferred channel including the reason for its non-preference, the operating class, channel number, and preference level.

Public Members

enum non_pref_chan_reason reason: Reason for the channel being non-preferred

uint8_t oper_class: Operating class of the channel

uint8_t chan: Channel number

uint8_t preference: Preference level of the channel

struct non_pref_chan_s

Structure representing a list of non-preferred channels in a wireless network.

This structure encapsulates information about a list of non-preferred channels including the number of non-preferred channels and an array of structures representing individual non-preferred channels.

Public Members

size_t non_pref_chan_num: Number of non-preferred channels in the list

struct non_pref_chan chan[]: Array of structures representing individual non-preferred channels

Enumerations

enum non_pref_chan_reason

Enumeration of reasons for a channel being non-preferred in a wireless network.

This enumeration defines various reasons why a specific channel might be considered non-preferred in a wireless network configuration.

Values:

enumerator NON_PREF_CHAN_REASON_UNSPECIFIED: Unspecified reason for non-preference

enumerator NON_PREF_CHAN_REASON_RSSI: Non-preferred due to low RSSI (Received Signal Strength Indication)

enumerator NON_PREF_CHAN_REASON_EXT_INTERFERENCE: Non-preferred due to external interference

enumerator NON_PREF_CHAN_REASON_INT_INTERFERENCE: Non-preferred due to internal interference

提供有关此文档的反馈