[ESP8266 Only] Signaling Test AT Commands

  • AT+FACTPLCP: Send with long or short PLCP (Physical Layer Convergence Procedure)

[ESP8266 Only] AT+FACTPLCP: Send with Long or Short PLCP

Set Command

Command:

AT+FACTPLCP=<enable>,<tx_with_long>

Response:

OK

Parameters

  • <enable>: Enable or disable manual configuration.
    • 0: Disable manual configuration. The default value for the parameter <tx_with_long> will be used.
    • 1: Enable manual configuration. The type of PLCP that AT sends depends on <tx_with_long>.
  • <tx_with_long>: Send with long PLCP or short PLCP.
    • 0: Send with short PLCP (default).
    • 1: Send with long PLCP.