RainMaker AT Commands and Firmware

• RainMaker AT Command Set
• RainMaker AT Examples
• RainMaker_AT_OTA_Guide
• Index of Abbreviations

RainMaker AT Messages

• ESP-AT RainMaker Message Reports (active)

  ESP-AT will report important RainMaker state changes or messages in the system.

  ESP-AT Message Report

  ESP-AT RainMaker Message Report	Description
  General AT messages	Please refer to ESP-AT Message Reports (active)
  +RMRECV:<src_name>,<device_name>,<param_name>:<param_value>	ESP-AT received messages from the RainMaker cloud, and <param_value> is a string
  +RMCONNECTED	RainMaker device connected to the cloud
  +RMDISCONNECTED	RainMaker device passively disconnected from the cloud
  +RMRESET	RainMaker device received reset message. Host MCU should actively execute the command AT+RST to restart the module after receiving the message
  +RMREBOOT	RainMaker device received reboot message. Host MCU should actively execute the command AT+RST to restart the module after receiving the message
  +RMTIMEZONE	RainMaker device received timezone message
  +RMMAPPINGDONE	RainMaker device completed user-node mapping
  +RMFWNOTIFY:<type>,<size>,<url>,<fw_version>,<ota_job_id>	RainMaker device outputs the received host MCU OTA information
  +RMOTA:<status>	RainMaker device outputs the Wi-Fi MCU OTA status

Provide feedback about this document