时钟树
ESP32-S2 的时钟子系统用于从一系列根时钟中提取并分配系统/模块时钟。时钟树驱动程序负责维护系统时钟的基本功能,并管理模块时钟间的复杂关系。
本文档首先介绍了根时钟和模块时钟,随后介绍了可供用户调用的时钟树 API,调用这些 API,可以监测模块时钟的运行状态。
简介
本节列出了 ESP32-S2 支持的根时钟和模块时钟的定义,这些定义通常用于驱动程序配置,有助于为外设选择合适的时钟源。
根时钟
根时钟会产生可靠的时钟信号,经各种门、复用器、分频器或倍频器传递,这些时钟信号最终成为 CPU 内核、Wi-Fi、蓝牙、RTC 及外设等功能模块的时钟源。
ESP32-S2 的根时钟列在 soc_root_clk_t
中:
内部 8 MHz RC 振荡器 (RC_FAST)
此 RC 振荡器可产生约 8.5 MHz 的时钟信号输出,标识为
RC_FAST_CLK
。此约 8.5 MHz 的信号也会传入可配置的分频器,默认情况下,该分频器会将输入的时钟频率分频 256 倍,生成信号
RC_FAST_D256_CLK
。在运行时,通过在
RC_FAST_D256_CLK
上校准,可以计算RC_FAST_CLK
的实际频率。外部 40 MHz 晶振 (XTAL)
内部 90 kHz RC 振荡器 (RC_SLOW)
此 RC 振荡器产生约 90 kHz 的时钟信号输出,标识为
RC_SLOW_CLK
。在运行时,通过校准,可以计算该时钟信号的实际频率。
外部 32 kHz 晶振 - 可选 (XTAL32K)
XTAL32K_CLK
的时钟源可以是连接到XTAL_32K_P
和XTAL_32K_N
管脚的 32 kHz 晶振,也可以是外部电路生成的 32 kHZ 时钟信号。如果使用外部电路生成的时钟信号,该信号必须连接到XTAL_32K_P
管脚。通过校准,可以计算
XTAL32K_CLK
的实际频率。
与晶振产生的信号相比,从 RC 振荡器电路产生的信号通常精度较低,且容易受环境影响。因此,ESP32-S2 为 RTC_SLOW_CLK
提供了几种时钟源选项,可以根据对系统时间精度和对功耗的要求选择。更多详情,请参阅 RTC 定时器时钟源。
模块时钟
ESP32-S2 的可用模块时钟在 soc_module_clk_t
中列出,每个模块时钟都有其唯一 ID。查阅文档中的枚举值,即可获取各模块时钟的详细信息。
使用 API
时钟树驱动程序提供了一个一体化接口,可以获取模块时钟的频率,即 esp_clk_tree_src_get_freq_hz()
。通过该函数,你可以在任何时刻,通过提供时钟名称 soc_module_clk_t
和指定返回频率值的精度级别 esp_clk_tree_src_freq_precision_t
,获取时钟频率。
API 参考
Header File
This header file can be included with:
#include "soc/clk_tree_defs.h"
Macros
-
SOC_CLK_RC_FAST_FREQ_APPROX
Approximate RC_FAST_CLK frequency in Hz
-
SOC_CLK_RC_SLOW_FREQ_APPROX
Approximate RC_SLOW_CLK frequency in Hz
-
SOC_CLK_RC_FAST_D256_FREQ_APPROX
Approximate RC_FAST_D256_CLK frequency in Hz
-
SOC_CLK_XTAL32K_FREQ_APPROX
Approximate XTAL32K_CLK frequency in Hz
-
SOC_GPTIMER_CLKS
Array initializer for all supported clock sources of GPTimer.
The following code can be used to iterate all possible clocks:
soc_periph_gptimer_clk_src_t gptimer_clks[] = (soc_periph_gptimer_clk_src_t)SOC_GPTIMER_CLKS; for (size_t i = 0; i< sizeof(gptimer_clks) / sizeof(gptimer_clks[0]); i++) { soc_periph_gptimer_clk_src_t clk = gptimer_clks[i]; // Test GPTimer with the clock `clk` }
-
SOC_LCD_CLKS
Array initializer for all supported clock sources of LCD.
-
SOC_RMT_CLKS
Array initializer for all supported clock sources of RMT.
-
SOC_TEMP_SENSOR_CLKS
Array initializer for all supported clock sources of Temperature Sensor.
-
SOC_UART_CLKS
Array initializer for all supported clock sources of UART.
-
SOC_I2S_CLKS
Array initializer for all supported clock sources of I2S.
-
SOC_I2C_CLKS
Array initializer for all supported clock sources of I2C.
-
SOC_SPI_CLKS
Array initializer for all supported clock sources of SPI.
-
SOC_SDM_CLKS
Array initializer for all supported clock sources of SDM.
-
SOC_GLITCH_FILTER_CLKS
Array initializer for all supported clock sources of Glitch Filter.
-
SOC_DAC_DIGI_CLKS
Array initializer for all supported clock sources of DAC digital controller.
-
SOC_DAC_COSINE_CLKS
Array initializer for all supported clock sources of DAC cosine wave generator.
-
SOC_TWAI_CLKS
Array initializer for all supported clock sources of TWAI.
-
SOC_ADC_DIGI_CLKS
Array initializer for all supported clock sources of ADC digital controller.
-
SOC_ADC_RTC_CLKS
Array initializer for all supported clock sources of ADC RTC controller.
-
SOC_MWDT_CLKS
Array initializer for all supported clock sources of MWDT.
-
SOC_LEDC_CLKS
Array initializer for all supported clock sources of LEDC.
Enumerations
-
enum soc_root_clk_t
Root clock.
Values:
-
enumerator SOC_ROOT_CLK_INT_RC_FAST
Internal 8MHz RC oscillator
-
enumerator SOC_ROOT_CLK_INT_RC_SLOW
Internal 90kHz RC oscillator
-
enumerator SOC_ROOT_CLK_EXT_XTAL
External 40MHz crystal
-
enumerator SOC_ROOT_CLK_EXT_XTAL32K
External 32kHz crystal/clock signal
-
enumerator SOC_ROOT_CLK_INT_RC_FAST
-
enum soc_cpu_clk_src_t
CPU_CLK mux inputs, which are the supported clock sources for the CPU_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_CPU_CLK_SRC_XTAL
Select XTAL_CLK as CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_PLL
Select PLL_CLK as CPU_CLK source (PLL_CLK is the output of 40MHz crystal oscillator frequency multiplier, can be 480MHz or 320MHz)
-
enumerator SOC_CPU_CLK_SRC_RC_FAST
Select RC_FAST_CLK as CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_APLL
Select APLL_CLK as CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_INVALID
Invalid CPU_CLK source
-
enumerator SOC_CPU_CLK_SRC_XTAL
-
enum soc_rtc_slow_clk_src_t
RTC_SLOW_CLK mux inputs, which are the supported clock sources for the RTC_SLOW_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW
Select RC_SLOW_CLK as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_XTAL32K
Select XTAL32K_CLK as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC_FAST_D256
Select RC_FAST_D256_CLK (referred as FOSC_DIV or 8m_d256/8md256 in TRM and reg. description) as RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_INVALID
Invalid RTC_SLOW_CLK source
-
enumerator SOC_RTC_SLOW_CLK_SRC_RC_SLOW
-
enum soc_rtc_fast_clk_src_t
RTC_FAST_CLK mux inputs, which are the supported clock sources for the RTC_FAST_CLK.
备注
Enum values are matched with the register field values on purpose
Values:
-
enumerator SOC_RTC_FAST_CLK_SRC_XTAL_D4
Select XTAL_D4_CLK (may referred as XTAL_CLK_DIV_4) as RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_RC_FAST
Select RC_FAST_CLK as RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_INVALID
Invalid RTC_FAST_CLK source
-
enumerator SOC_RTC_FAST_CLK_SRC_DEFAULT
XTAL_D4_CLK is the default clock source for RTC_FAST_CLK
-
enumerator SOC_RTC_FAST_CLK_SRC_XTAL_DIV
Alias name for
SOC_RTC_FAST_CLK_SRC_XTAL_D4
-
enumerator SOC_RTC_FAST_CLK_SRC_XTAL_D4
-
enum soc_xtal_freq_t
Possible main XTAL frequency options on the target.
备注
Enum values equal to the frequency value in MHz
备注
Not all frequency values listed here are supported in IDF. Please check SOC_XTAL_SUPPORT_XXX in soc_caps.h for the supported ones.
Values:
-
enumerator SOC_XTAL_FREQ_40M
40MHz XTAL
-
enumerator SOC_XTAL_FREQ_40M
-
enum soc_module_clk_t
Supported clock sources for modules (CPU, peripherals, RTC, etc.)
备注
enum starts from 1, to save 0 for special purpose
Values:
-
enumerator SOC_MOD_CLK_CPU
CPU_CLK can be sourced from XTAL, PLL, RC_FAST, or APLL by configuring soc_cpu_clk_src_t
-
enumerator SOC_MOD_CLK_RTC_FAST
RTC_FAST_CLK can be sourced from XTAL_D4 or RC_FAST by configuring soc_rtc_fast_clk_src_t
-
enumerator SOC_MOD_CLK_RTC_SLOW
RTC_SLOW_CLK can be sourced from RC_SLOW, XTAL32K, or RC_FAST_D256 by configuring soc_rtc_slow_clk_src_t
-
enumerator SOC_MOD_CLK_APB
APB_CLK is highly dependent on the CPU_CLK source
-
enumerator SOC_MOD_CLK_PLL_F160M
PLL_F160M_CLK is derived from PLL, and has a fixed frequency of 160MHz
-
enumerator SOC_MOD_CLK_XTAL32K
XTAL32K_CLK comes from the external 32kHz crystal, passing a clock gating to the peripherals
-
enumerator SOC_MOD_CLK_RC_FAST
RC_FAST_CLK comes from the internal 8MHz rc oscillator, passing a clock gating to the peripherals
-
enumerator SOC_MOD_CLK_RC_FAST_D256
RC_FAST_D256_CLK is derived from the internal 8MHz rc oscillator, divided by 256, and passing a clock gating to the peripherals
-
enumerator SOC_MOD_CLK_XTAL
XTAL_CLK comes from the external 40MHz crystal
-
enumerator SOC_MOD_CLK_REF_TICK
REF_TICK is derived from XTAL or RC_FAST via a divider, it has a fixed frequency of 1MHz by default
-
enumerator SOC_MOD_CLK_APLL
APLL is sourced from PLL, and its frequency is configurable through APLL configuration registers
-
enumerator SOC_MOD_CLK_TEMP_SENSOR
TEMP_SENSOR_CLK comes directly from the internal 8MHz rc oscillator
-
enumerator SOC_MOD_CLK_INVALID
Indication of the end of the available module clock sources
-
enumerator SOC_MOD_CLK_CPU
-
enum soc_periph_systimer_clk_src_t
Type of SYSTIMER clock source.
Values:
-
enumerator SYSTIMER_CLK_SRC_XTAL
SYSTIMER source clock is XTAL
-
enumerator SYSTIMER_CLK_SRC_DEFAULT
SYSTIMER source clock default choice is XTAL
-
enumerator SYSTIMER_CLK_SRC_XTAL
-
enum soc_periph_gptimer_clk_src_t
Type of GPTimer clock source.
Values:
-
enumerator GPTIMER_CLK_SRC_APB
Select APB as the source clock
-
enumerator GPTIMER_CLK_SRC_XTAL
Select XTAL as the source clock
-
enumerator GPTIMER_CLK_SRC_DEFAULT
Select APB as the default choice
-
enumerator GPTIMER_CLK_SRC_APB
-
enum soc_periph_tg_clk_src_legacy_t
Type of Timer Group clock source, reserved for the legacy timer group driver.
Values:
-
enumerator TIMER_SRC_CLK_APB
Timer group source clock is APB
-
enumerator TIMER_SRC_CLK_XTAL
Timer group source clock is XTAL
-
enumerator TIMER_SRC_CLK_DEFAULT
Timer group source clock default choice is APB
-
enumerator TIMER_SRC_CLK_APB
-
enum soc_periph_lcd_clk_src_t
Type of LCD clock source.
Values:
-
enumerator LCD_CLK_SRC_PLL160M
Select PLL_F160M as the source clock
-
enumerator LCD_CLK_SRC_DEFAULT
Select PLL_F160M as the default choice
-
enumerator LCD_CLK_SRC_PLL160M
-
enum soc_periph_rmt_clk_src_t
Type of RMT clock source.
Values:
-
enumerator RMT_CLK_SRC_APB
Select APB as the source clock
-
enumerator RMT_CLK_SRC_REF_TICK
Select REF_TICK as the source clock
-
enumerator RMT_CLK_SRC_DEFAULT
Select APB as the default choice
-
enumerator RMT_CLK_SRC_APB
-
enum soc_periph_rmt_clk_src_legacy_t
Type of RMT clock source, reserved for the legacy RMT driver.
Values:
-
enumerator RMT_BASECLK_APB
RMT source clock is APB CLK
-
enumerator RMT_BASECLK_REF
RMT source clock is REF_TICK
-
enumerator RMT_BASECLK_DEFAULT
RMT source clock default choice is APB
-
enumerator RMT_BASECLK_APB
-
enum soc_periph_temperature_sensor_clk_src_t
Type of Temp Sensor clock source.
Values:
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_DEFAULT
Select RC_FAST as the default choice
-
enumerator TEMPERATURE_SENSOR_CLK_SRC_RC_FAST
-
enum soc_periph_uart_clk_src_legacy_t
Type of UART clock source, reserved for the legacy UART driver.
Values:
-
enumerator UART_SCLK_APB
UART source clock is APB CLK
-
enumerator UART_SCLK_REF_TICK
UART source clock is REF_TICK
-
enumerator UART_SCLK_DEFAULT
UART source clock default choice is APB
-
enumerator UART_SCLK_APB
-
enum soc_periph_i2s_clk_src_t
I2S clock source enum.
Values:
-
enumerator I2S_CLK_SRC_DEFAULT
Select PLL_F160M as the default source clock
-
enumerator I2S_CLK_SRC_PLL_160M
Select PLL_F160M as the source clock
-
enumerator I2S_CLK_SRC_APLL
Select APLL as the source clock
-
enumerator I2S_CLK_SRC_DEFAULT
-
enum soc_periph_i2c_clk_src_t
Type of I2C clock source.
Values:
-
enumerator I2C_CLK_SRC_APB
-
enumerator I2C_CLK_SRC_REF_TICK
-
enumerator I2C_CLK_SRC_DEFAULT
-
enumerator I2C_CLK_SRC_APB
-
enum soc_periph_spi_clk_src_t
Type of SPI clock source.
Values:
-
enumerator SPI_CLK_SRC_DEFAULT
Select APB as SPI source clock
-
enumerator SPI_CLK_SRC_APB
Select XTAL as SPI source clock
-
enumerator SPI_CLK_SRC_DEFAULT
-
enum soc_periph_sdm_clk_src_t
Sigma Delta Modulator clock source.
Values:
-
enumerator SDM_CLK_SRC_APB
Select APB as the source clock
-
enumerator SDM_CLK_SRC_DEFAULT
Select APB as the default clock choice
-
enumerator SDM_CLK_SRC_APB
-
enum soc_periph_glitch_filter_clk_src_t
Glitch filter clock source.
Values:
-
enumerator GLITCH_FILTER_CLK_SRC_APB
Select APB clock as the source clock
-
enumerator GLITCH_FILTER_CLK_SRC_DEFAULT
Select APB clock as the default clock choice
-
enumerator GLITCH_FILTER_CLK_SRC_APB
-
enum soc_periph_dac_digi_clk_src_t
DAC digital controller clock source.
Values:
-
enumerator DAC_DIGI_CLK_SRC_APB
Select APB as the source clock
-
enumerator DAC_DIGI_CLK_SRC_APLL
Select APLL as the source clock
-
enumerator DAC_DIGI_CLK_SRC_DEFAULT
Select APB as the default source clock
-
enumerator DAC_DIGI_CLK_SRC_APB
-
enum soc_periph_dac_cosine_clk_src_t
DAC cosine wave generator clock source.
Values:
-
enumerator DAC_COSINE_CLK_SRC_RTC_FAST
Select RTC FAST as the source clock
-
enumerator DAC_COSINE_CLK_SRC_DEFAULT
Select RTC FAST as the default source clock
-
enumerator DAC_COSINE_CLK_SRC_RTC_FAST
-
enum soc_periph_twai_clk_src_t
TWAI clock source.
Values:
-
enumerator TWAI_CLK_SRC_APB
Select APB as the source clock
-
enumerator TWAI_CLK_SRC_DEFAULT
Select APB as the default clock choice
-
enumerator TWAI_CLK_SRC_APB
-
enum soc_periph_adc_digi_clk_src_t
ADC digital controller clock source.
Values:
-
enumerator ADC_DIGI_CLK_SRC_APB
Select APB as the source clock
-
enumerator ADC_DIGI_CLK_SRC_APLL
Select APLL as the source clock
-
enumerator ADC_DIGI_CLK_SRC_DEFAULT
Select APB as the default clock choice
-
enumerator ADC_DIGI_CLK_SRC_APB
-
enum soc_periph_adc_rtc_clk_src_t
ADC RTC controller clock source.
Values:
-
enumerator ADC_RTC_CLK_SRC_RC_FAST
Select RC_FAST as the source clock
-
enumerator ADC_RTC_CLK_SRC_DEFAULT
Select RC_FAST as the default clock choice
-
enumerator ADC_RTC_CLK_SRC_RC_FAST
-
enum soc_periph_mwdt_clk_src_t
MWDT clock source.
Values:
-
enumerator MWDT_CLK_SRC_APB
Select APB as the source clock
-
enumerator MWDT_CLK_SRC_DEFAULT
Select APB as the default clock choice
-
enumerator MWDT_CLK_SRC_APB
-
enum soc_periph_ledc_clk_src_legacy_t
Type of LEDC clock source, reserved for the legacy LEDC driver.
Values:
-
enumerator LEDC_AUTO_CLK
LEDC source clock will be automatically selected based on the giving resolution and duty parameter when init the timer
-
enumerator LEDC_USE_APB_CLK
Select APB as the source clock
-
enumerator LEDC_USE_RC_FAST_CLK
Select RC_FAST as the source clock
-
enumerator LEDC_USE_REF_TICK
Select REF_TICK as the source clock
-
enumerator LEDC_USE_XTAL_CLK
Select XTAL as the source clock
-
enumerator LEDC_USE_RTC8M_CLK
Alias of 'LEDC_USE_RC_FAST_CLK'
-
enumerator LEDC_AUTO_CLK
-
enum soc_clkout_sig_id_t
Values:
-
enumerator CLKOUT_SIG_PLL
PLL_CLK is the output of crystal oscillator frequency multiplier
-
enumerator CLKOUT_SIG_RC_SLOW
RC slow clock, depends on the RTC_CLK_SRC configuration
-
enumerator CLKOUT_SIG_XTAL
Main crystal oscillator clock
-
enumerator CLKOUT_SIG_APLL
Divided by PLL, frequency is configurable
-
enumerator CLKOUT_SIG_REF_TICK
Divided by APB clock, usually be 1MHz
-
enumerator CLKOUT_SIG_PLL_F80M
From PLL, usually be 80MHz
-
enumerator CLKOUT_SIG_RC_FAST
RC fast clock, about 17.5MHz
-
enumerator CLKOUT_SIG_INVALID
-
enumerator CLKOUT_SIG_PLL
Header File
This header file can be included with:
#include "esp_clk_tree.h"
Functions
-
esp_err_t esp_clk_tree_src_get_freq_hz(soc_module_clk_t clk_src, esp_clk_tree_src_freq_precision_t precision, uint32_t *freq_value)
Get frequency of module clock source.
- 参数
clk_src -- [in] Clock source available to modules, in soc_module_clk_t
precision -- [in] Degree of precision, one of esp_clk_tree_src_freq_precision_t values This arg only applies to the clock sources that their frequencies can vary: SOC_MOD_CLK_RTC_FAST, SOC_MOD_CLK_RTC_SLOW, SOC_MOD_CLK_RC_FAST, SOC_MOD_CLK_RC_FAST_D256, SOC_MOD_CLK_XTAL32K For other clock sources, this field is ignored.
freq_value -- [out] Frequency of the clock source, in Hz
- 返回
ESP_OK Success
ESP_ERR_INVALID_ARG Parameter error
ESP_FAIL Calibration failed
Enumerations
-
enum esp_clk_tree_src_freq_precision_t
Degree of precision of frequency value to be returned by esp_clk_tree_src_get_freq_hz()
Values:
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_APPROX
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_EXACT
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_INVALID
-
enumerator ESP_CLK_TREE_SRC_FREQ_PRECISION_CACHED