Reset Reason¶
About¶
Note
This is a work in progress project and this section is still missing. If you want to contribute, please see the Contributions Guide.
Example¶
To get started with Reset Reason, you can try:
Reset Reason¶
/*
* Print last reset reason of ESP32
* =================================
*
* Use either of the methods print_reset_reason
* or verbose_print_reset_reason to display the
* cause for the last reset of this device.
*
* Public Domain License.
*
* Author:
* Evandro Luis Copercini - 2017
*/
#ifdef ESP_IDF_VERSION_MAJOR // IDF 4+
#if CONFIG_IDF_TARGET_ESP32 // ESP32/PICO-D4
#include "esp32/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/rom/rtc.h"
#else
#error Target CONFIG_IDF_TARGET is not supported
#endif
#else // ESP32 Before IDF 4.0
#include "rom/rtc.h"
#endif
#define uS_TO_S_FACTOR 1000000 /* Conversion factor for micro seconds to seconds */
void print_reset_reason(int reason)
{
switch ( reason)
{
case 1 : Serial.println ("POWERON_RESET");break; /**<1, Vbat power on reset*/
case 3 : Serial.println ("SW_RESET");break; /**<3, Software reset digital core*/
case 4 : Serial.println ("OWDT_RESET");break; /**<4, Legacy watch dog reset digital core*/
case 5 : Serial.println ("DEEPSLEEP_RESET");break; /**<5, Deep Sleep reset digital core*/
case 6 : Serial.println ("SDIO_RESET");break; /**<6, Reset by SLC module, reset digital core*/
case 7 : Serial.println ("TG0WDT_SYS_RESET");break; /**<7, Timer Group0 Watch dog reset digital core*/
case 8 : Serial.println ("TG1WDT_SYS_RESET");break; /**<8, Timer Group1 Watch dog reset digital core*/
case 9 : Serial.println ("RTCWDT_SYS_RESET");break; /**<9, RTC Watch dog Reset digital core*/
case 10 : Serial.println ("INTRUSION_RESET");break; /**<10, Instrusion tested to reset CPU*/
case 11 : Serial.println ("TGWDT_CPU_RESET");break; /**<11, Time Group reset CPU*/
case 12 : Serial.println ("SW_CPU_RESET");break; /**<12, Software reset CPU*/
case 13 : Serial.println ("RTCWDT_CPU_RESET");break; /**<13, RTC Watch dog Reset CPU*/
case 14 : Serial.println ("EXT_CPU_RESET");break; /**<14, for APP CPU, reseted by PRO CPU*/
case 15 : Serial.println ("RTCWDT_BROWN_OUT_RESET");break;/**<15, Reset when the vdd voltage is not stable*/
case 16 : Serial.println ("RTCWDT_RTC_RESET");break; /**<16, RTC Watch dog reset digital core and rtc module*/
default : Serial.println ("NO_MEAN");
}
}
void verbose_print_reset_reason(int reason)
{
switch ( reason)
{
case 1 : Serial.println ("Vbat power on reset");break;
case 3 : Serial.println ("Software reset digital core");break;
case 4 : Serial.println ("Legacy watch dog reset digital core");break;
case 5 : Serial.println ("Deep Sleep reset digital core");break;
case 6 : Serial.println ("Reset by SLC module, reset digital core");break;
case 7 : Serial.println ("Timer Group0 Watch dog reset digital core");break;
case 8 : Serial.println ("Timer Group1 Watch dog reset digital core");break;
case 9 : Serial.println ("RTC Watch dog Reset digital core");break;
case 10 : Serial.println ("Instrusion tested to reset CPU");break;
case 11 : Serial.println ("Time Group reset CPU");break;
case 12 : Serial.println ("Software reset CPU");break;
case 13 : Serial.println ("RTC Watch dog Reset CPU");break;
case 14 : Serial.println ("for APP CPU, reseted by PRO CPU");break;
case 15 : Serial.println ("Reset when the vdd voltage is not stable");break;
case 16 : Serial.println ("RTC Watch dog reset digital core and rtc module");break;
default : Serial.println ("NO_MEAN");
}
}
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
delay(2000);
Serial.println("CPU0 reset reason:");
print_reset_reason(rtc_get_reset_reason(0));
verbose_print_reset_reason(rtc_get_reset_reason(0));
Serial.println("CPU1 reset reason:");
print_reset_reason(rtc_get_reset_reason(1));
verbose_print_reset_reason(rtc_get_reset_reason(1));
// Set ESP32 to go to deep sleep to see a variation
// in the reset reason. Device will sleep for 5 seconds.
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
Serial.println("Going to sleep");
esp_deep_sleep(5 * uS_TO_S_FACTOR);
}
void loop() {
// put your main code here, to run repeatedly:
}
/*
Example Serial Log:
====================
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0008,len:8
load:0x3fff0010,len:160
load:0x40078000,len:10632
load:0x40080000,len:252
entry 0x40080034
CPU0 reset reason:
RTCWDT_RTC_RESET
RTC Watch dog reset digital core and rtc module
CPU1 reset reason:
EXT_CPU_RESET
for APP CPU, reseted by PRO CPU
Going to sleep
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0008,len:8
load:0x3fff0010,len:160
load:0x40078000,len:10632
load:0x40080000,len:252
entry 0x40080034
CPU0 reset reason:
DEEPSLEEP_RESET
Deep Sleep reset digital core
CPU1 reset reason:
EXT_CPU_RESET
for APP CPU, reseted by PRO CPU
Going to sleep
ets Jun 8 2016 00:22:57
rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0008,len:8
load:0x3fff0010,len:160
load:0x40078000,len:10632
load:0x40080000,len:252
entry 0x40080034
CPU0 reset reason:
DEEPSLEEP_RESET
Deep Sleep reset digital core
CPU1 reset reason:
EXT_CPU_RESET
for APP CPU, reseted by PRO CPU
Going to sleep
*/