Compile ESP-AT Project Locally

[中文]

This document details how to build your own ESP-AT project locally and flash the generated firmware into your ESP32-C6. It comes in handy when the official released fimware cannot meet your needs, for example, to customize the AT port pins, Bluetooth LE services, and partitions, and so on.

If you have difficulties in compiling ESP-AT project locally, or you only need to modify a small amount of code, we recommend that you use Compile ESP-AT Project on the GitHub Webpage.

Detailed Steps

Please follow the detailed steps below to set up your environment and build the project. It is recommended that you develop the esp-at project on Linux system.

Step 1. Get Started with ESP-IDF

Get started with ESP-IDF before compiling an ESP-AT project, because ESP-AT is developed based on ESP-IDF.

Please follow ESP-IDF v5.1 Get Started guide, configure, build, flash onto the ESP32-C6 device of the hello_world example.

Note

This step is not a must, but if you are a beginner, you are strongly recommended to complete it in order to familiarize yourself with ESP-IDF and ensure smooth proceeding with the following steps.

After you complete the ESP-IDF get started in the step above, now you can proceed to compile an ESP-AT project according to the following steps.

Step 2. Get ESP-AT

To compile an ESP-AT project, you need the software libraries provided by Espressif in the ESP-AT repository.

To get ESP-AT, navigate to your installation directory and clone the repository with git clone, following instructions below specific to your operating system.

  • Linux or macOS

    cd ~/esp
    git clone --recursive https://github.com/espressif/esp-at.git
    
  • Windows

    For ESP32-C6 series of modules, it is recommended that you run ESP-IDF 5.1 CMD as an administrator first.

    cd %userprofile%\esp
    git clone --recursive https://github.com/espressif/esp-at.git
    

If you are located in China or have difficulties to access GitHub, you can also use git clone https://jihulab.com/esp-mirror/espressif/esp-at.git or git clone https://gitee.com/EspressifSystems/esp-at.git to get ESP-AT, which may be faster.

ESP-AT will be downloaded into ~/esp/esp-at on Linux or macOS, or %userprofile%\esp\esp-at on Windows.

Note

This guide uses the directory ~/esp on Linux or macOS, or %userprofile%\esp on Windows as an installation folder for ESP-AT. You can use any directory, but you will need to adjust paths for the commands respectively. Keep in mind that ESP-AT does not support spaces in paths.

Step 3. Install Environment

Run the project tool install to install the environment. This tool will automatically install Python packages, ESP-IDF repository, and the compiler and tools used by ESP-IDF.

  • Linux or macOS

    ./build.py install
    
  • Windows

    python build.py install
    

Select the following configuration options for your ESP32-C6 if it is your first time.

  • Select the Platform name for your ESP32-C6. For example, select PLATFORM_ESP32C6 for ESP32-C6 series of products. Platform name is defined in factory_param_data.csv .

  • Select the Module name for your ESP32-C6. For example, select ESP32C6-4MB for the ESP32-C6-MINI-1 module. Module name is defined in factory_param_data.csv .

  • Enable or disable silence mode. If enabled, it will remove some logs and reduce the firmware size. Generally, it should be disabled.

  • The above three option items will not appear if the file build/module_info.json exists. So please delete it if you want to reconfigure the module information.

Step 4. Connect Your Device

Connect your ESP32-C6 device to the PC with a USB cable to download firmware and print log. See Hardware Connection for more information. Note that you do not need to set up the “AT command/response” connection if you do not send AT commands and receive AT responses during the compiling process. You can change default port pins referring to How to Set AT Port Pins.

Step 5. Configure

Run the project configuration utility menuconfig to configure.

  • Linux or macOS

    ./build.py menuconfig
    
  • Windows

    python build.py menuconfig
    

If the previous steps have been done correctly, the following menu pops up:

Project configuration - Home window

Project configuration - Home window

You are using this menu to set up project-specific configuration, e.g. changing AT port pins, enabling Classic Bluetooth function, etc. If you made no changes, it will run with the default configuration.

Step 6. Build the Project

Build the project by running:

  • Linux or macOS

    ./build.py build
    
  • Windows

    python build.py build
    

If Bluetooth feature is enabled, the firmware size will be much larger. Please make sure it does not exceed the OTA partition size.

After compiled, the combined factory bin will be created in build/factory. See ESP-AT Firmware Differences for more information.

Step 7. Flash onto the Device

Flash the firmware that you just compiled onto your ESP32-C6 by running:

  • Linux or macOS

    ./build.py -p (PORT) flash
    
  • Windows

    python build.py -p (PORT) flash
    

Note that you need to replace (PORT) with your ESP32-C6’s serial port name. Or you can follow the printed instructions to download the bin files into flash. Note that you also need to replace the (PORT).

If the ESP-AT bin fails to boot and prints “ota data partition invalid”, you should run python build.py erase_flash to erase the entire flash, and then reflash the AT firmware.

build.py Advanced Usage

The script build.py is based on idf.py, which means that all idf.py <cmd> features should be included in build.py <cmd>. You can run the following command for more details.

  • Linux or macOS

./build.py --help
  • Windows

python build.py --help