WFA Certification Test

1. How can I get the USB port name of the device?

Run the command ls /dev/ttyUSB* in the terminal to see the USB port name.

2. How can I get the MAC address of the DUT?

Open minicom with the command minicom -D /dev/ttyUSB*;

Type query and the MAC address of the DUT will be shown as dut_mac.

3. How do I flash the enterprise certificate?

The certificate is already included in the firmware, so you do not need to flash it separately.

4. Why isn’t the tool starting?

Check the Python version and ensure the toolchain is fully installed.

5. Why is the tool script not detecting UCC commands after starting?

Ensure that the IP address is correctly configured on your computer.

6. What should I do if the DUT shows garbled output and is unresponsive to read/write commands?

Confirm that the DUT is flashed with the correct bin files and check that the power supply is working properly.